KM Series 3.3V CMOS kHz Crystal Oscillator 2.0 x 1.6mm KM 3.3V CMOS 32.768kHz KN Series Real Time Clock Oscillator 7.0x5.0mm (XO) 2.0 x 1.6mm Ceramic SMD Package: (Scale: none. Dimensions are in mm) Product Features Recommended Land Pattern: • 32.768 kHz • 3.3V CMOS compatible logic levels • Low power standby mode (< 10µA) • Low power active mode (< 80µA) • Designed for standard reflow and washing techniques • Pb-free and RoHS/Green compliant CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. Product Description Pin Functions: The KM Series real time clock oscillator achieves superb stability over a broad range of operating conditions. The output clock signal is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 2.0 x 1.6mm surface-mount ceramic package. Applications Pin Function 1 OE 2 Ground 3 Clock Output 4 V DD CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. Real-Time Clock Oscillator Standby clock source Part Ordering Information: KM XXX YYYY A: Product�Family B: XXX = Frequency�Code C: YYYY = Specification�Code Following the above format, SaRonix-eCera part numbers will be assigned upon confirmation of exact customer requirements. SaRonix-eCera™ is a Pericom® Semiconductor company 13-0014 • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com All specifications are subject to change without notice. KM 3.3V REV A Nov. 26, 2013 1 3.3V CMOS 32.768kHz KM KM Series 3.3V CMOS kHz Crystal Oscillator 2.0 x 1.6mm Electrical Performance Parameter Min. Typ. Output Frequency Max. 32.768 Supply Voltage +2.97 Supply Current, Output Enabled kHz +3.3 +3.63 V 60 80 µA Supply Current, Standby Mode Frequency Stability Operating Temperature Range As specified 10 µA Output Hi-Z ppm See Note 1 below -20 +70 -40 +85 °C As specified As specified 0.1 V DD V 15 pF See Note 2 below 55 % measured 50% of V DD 15 ns measured 10/90% of V DD 0.9 V DD V Output Load Duty Cycle Notes ±20 to ±50 Output Logic 0, VOL Output Logic 1, VOH Units 45 Rise and Fall Time Notes: 1. As specified. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. 2. For specifications other than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. 0.7 V DD Input Voltage (pin 1), Output Disable (low power standby) 0.3 V DD Internal Pullup Resistance 470 Units Notes V or open V Output is Hi-Z kΩ Output Disable Delay 100 ns Output Enable Delay 2 ms Absolute Maximum Ratings Parameter Min. Storage Temperature Typ. -55 Max. Units +125 °C Notes For the latest product information visit: http://www.pericom.com/products/crystals-and-crystal-oscillators/xo/?part=KM+3.3 For test circuit go to: http://www.pericom.com/pdf/sre/tc_cmos2.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_2016_xo.pdf SaRonix-eCera™ is a Pericom® Semiconductor company 13-0014 • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com All specifications are subject to change without notice. KM 3.3V REV A Nov. 26, 2013 2