TM Application Specific Crystal Oscillator 7.0 x 5.0mm FNSURV054 3.3V CMOS Low-Jitter 54 MHz MPEG4 XO ASSP XO™ for Security 7.0 x 5.0mm Ceramic SMD Package: (Scale: none, Dimensions are in mm) Product Features Recommended Land Pattern: • Very low Pk to Pk jitter - 50ps Max • Low output current - 20mA Max • Low power standby mode • RoHS Compliant Product Description This is an enhanced 3.3V, 54MHz crystal clock oscillator with superb jitter and low operating current providing a clock reference for MPEG4 video decoding applications. Pin Functions: Applications Pin Function • Digital Video Recorder 1 OE Function • Video Surveillance Equipment 2 Ground 3 Clock Output 4 V DD • Video Surveillance Add-in card *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. Part Ordering Information: FNSURV054 SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 12-0051 All specifications are subject to change without notice. FNSURV054 Rev F 07/16/12 1 3.3V CMOS Low-Jitter 54 MHz MPEG4 XO FNSURV054 TM Application Specific Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. 2.97 3.3 Output Frequency Max. Units 54 Supply Voltage V DD MHz 3.63 V Supply Current, Output Enabled 20 mA Supply Current, Output Disabled 10 µA Frequency Stability Operating Temperature Range ±30 ppm +70 °C 10% V DD V -20 Output Logic 0, VOL Output Logic 1, VOH 90% V DD See Note 1 below V Output Load 15 Duty Cycle Notes 45 pF 55 % Measured 50% V DD Rise and Fall Time 5 ns Measured 20/80% of waveform Jitter, pk-pk 50 ps 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. 0.7 V DD Input Voltage (pin 1), Output Disable (low power standby) 0.3 V DD Internal Pullup Resistance 30 Units Notes V or open V Output is Hi-Z kΩ Output Disable Delay 200 ns Output Enable Delay 2 ms Absolute Maximum Ratings Parameter Storage Temperature For the latest product information visit: For test circuit go to: Min. Typ. -55 Max. Units +125 °C Notes http://www.pericom.com/products/crystals-and-crystal-oscillators/assp-xo/?part=FNSURV054 http://www.pericom.com/pdf/sre/tc_hcmos.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050_xo.pdf SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 12-0051 All specifications are subject to change without notice. FNSURV054 Rev F 07/16/12 2