GENERAL PURPOSE 1W TO 25W CERAMIC-ENCASED RESISTORS PW SERIES RoHS RCD PW10A 10KΩ 5% Term.W is RoHS compliant & 260°C compatible Low cost and the industry’s broadest selection! Available from stock in popular sizes (5W & 10W, 0.1Ω to 5K) and selected values in other sizes; non-stock items are available on exclusive SWIFTTM delivery program Tolerance to ±0.05%, TCR to ±5 ppm/°C Wide resistance range: .05Ω to 200KΩ Tape & Reel available up to 10W size (Opt. A not avail. on T&R) OPTIONS Option X: Non-inductive (PW5X & smaller: ≤50Ω =0.2uH max, >50Ω= 0.37uH max; PW7X & larger: ≤50Ω=0.3uH max, >50Ω= 0.6uH max). Reduced inductance levels available Option T: Temp. sensitive (up to +6000ppm/°C) Option P: Increased pulse capability Option FF: Fuse within 10S at 30x rated W 4 and within 45S at 20x rated W (1Ω to 1K). Custom fusing characteristics avail. Option B: Increased power Option A: Standoffs built into ceramic case Additional options available... burn-in, special marking, nonstandard values, increased voltage, longer or heavier gauge leads, specialty lead wire material/plating/insulation, cut & formed leads, etc. Customized components are an RCD specialty! 1.00” Min PW1,2 1.12” Min PW3,5 1.25” Min PW7-25 A ← B→ ↑ ↓E ↑ ↓ RCD Type C ↓ D ↑ (standoffs apply to Opt.A only) DERATING CURVE: Stock % OF RATED POWER (derate W/V/A when ambient temp. > 25°C) 100 PW resistors are designed for general purpose and semi-precision medium power applications. The fireproof ceramic construction provides excellent thermal conductivity and is resistant to moisture & solvents. Typical marking is ‘RCD’, value, tol. &wattage (or type). Resis. element is wirewound on lower values & power film on higher values, depending on options (e.g. opt. P & T parts are always WW). If a specific construction is preferred, specify opt.WW or M (not avail. in all values). APPLICATION NOTE #1: Resistor Comparison Series PW resistors offer moderate performance levels at prices below that of other WW or film technologies. Other choices for medium power applications are Series PV resistors (2W to 10W, similar to PW in vertical package); Series 100 military grade WW (1/ 2W to 50W, offers improved performance, pulse capability, and reliability); Series RW (1W to 5W WW, offers space savings); and Series RSF/RMF power film (1/2W to 9W, offers reduced inductance). APPLICATION NOTE #2: Temperature Rise Power resistors reach elevated temperatures (typically 125° to 250°C) when operated at full wattage, so when utilizing above 50% power rating, the bodies should be mounted off the PCB with adequate clearance from heat sensitive components. Opt. A standoffs are helpful in preventing heat transfer to PCB. Wattage Resis. Max. Range Working Opt. (0.05Ω - Voltage1 Std. B DIMENSIONS (Numbers in brackets are mm) A (Max.) B ±.032 [.81] C ±.05 [1.3] D Typ. Opt. A only E ±.004 [.1] .028 [.7] PW1 1 2 1M 1002 .62 [15.8] .25 [6.4] .25 [6.4] N/A PW2 2 3 1M 1002 .72 [18.3] .27 [ 6.8] .27 [6.8] .06 [1.5] .028 [.7] PW3 3 5 1M 1502 .91 [23.1] .31 [ 7.9] .31 [7.9] .06 [1.5] .031 [.8]3 PW5 5 7 1M 2002 .91 [23.1] .38 [ 9.7] .35 [8.9] .06 [1.5] .031 [.8]3 PW7 7 10 1M 350 1.42 [36] .38 [ 9.7] .35 [8.9] .10 [2.5] .031 [.8]3 PW10 10 - 1M 500 1.96 [50] .38 [ 9.7] .38 [9.7] .10[2.5] .031 [.8]3 75 PW15 15 - 30K 540 1.96 [50] .50 [12.7] .50 [12.7] .10 [2.5] .031 [.8]3 50 PW20 20 - 40K 600 2.55 [65] .562 [14.3] max .50 [12.7] .10 [2.5] .031 [.8]3 25 PW22 22 - 40K 650 2.55 [65] .562 [14.3] max .50 [12.7] .10 [2.5] .031 [.8]3 PW25 25 - 40K 700 2.55 [65] .562 [14.3] max .50 [12.7] .10 [2.5] .031 [.8]3 Stock 0 50 100 150 200 250 300 1 235°C AMBIENT TEMPERATURE (°C) 2 Maximum voltage rating is determined by E= PR, E should not exceed value listed. Specify opt. 59 for double voltage rating. 3 Specify opt.18 for 18AWG (.040”) diameter leads. TYPICAL PERFORMANCE FOR SERIES PW Temperature CoefT25 -T100 P/N DESIGNATION: PW10 - 100 - J B 1Ω and above 100ppm/°C typ., 300ppm max.1 RCD Type 0.05Ω to 1Ω 200ppm/°C typ., 600ppm max.1 Options: X, WW, T, P, M, FF, B, A, 59, 18 (Leave blank if standard) Resis.Code .05%-1%: 3 signif. figures & multiplier, R100=0.1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1K. Resis.Code 2%-10%: 2 signif. figures & multiplier, R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K. If necessary, use additional (significant) digits, e.g. R005 for 0.005Ω, R0075 for 0.0075Ω in any tolerance. Operating Temp. -55° to +235° C Terminal Strength 5 lbs. minimum Dielectric Strength 1000V 5 Sec. overload (≤1.5x max V) 2 3X rated wattage (Opt. WW = 5X) Moisture Resistance 3.0% 3 High Temp. Exposure 1.0% 3 Load Life (1000 hours) 3.0% 3 Temperature Cycling 2.0% 3 Shock and Vibration 1.0% 3 1 RESISTORSCAPACITORSCOILSDELAY LINES Ω 5% RCD PW10 100Ω TC to 5ppm available >10Ω, 10ppm 1-10Ω, 20ppm 0.1-1Ω 2 275°C avail 3 Tightened performance avail 4 Max fault nte 200x W rating, or voltage rating, whichever is less W Tolerance: K=10%, J=5% (std), H=3%, G=2%, F=1%, D=0.5%, C=0.25%, B=0.1% Packaging: B=Bulk (standard), T= Tape & Reel Temp. Coefficient (leave blank for standard TC): 5=5ppm, 10=10ppm, 20= 20ppm, 50=50ppm, 101=100ppm, 201=200ppm Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable, in which case RCD will select based on lowest price and quickest delivery RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA040F Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 47