2W TO 25 WATT VERTICAL MOUNT RESISTORS OPTIONS Option X - Non-Inductive Option WW or M (wirewound or film element) Option P - Increased pulse capability Option FF- Fuse within 10S @50x rated W (custom avail) Option E - Low thermal EMF design Option B - Increased power (refer to chart below) Numerous modifications avail: custom marking, TC’s to +6000ppm, various lead wire sizes, burn-in, etc. SERIES Wattage PV Std (Opt.B) PV2 2W (3W) PV3 3W (4W) PV5 5W (6W) PV7 7W (10W) P V 10 10W (12W) PV10S 10W (12W) PV10A 10W (12W) SERIES PVH PVH2 PVH3 PVH5 PVH7 PVH10 PVH10S PVH10A Max. Max. Voltage* Current* 80V 14A 150V 17A 250V 22A 350V 26A 500V 32A 400V 32A 400V 32A Std Resis R an g e .005Ω to 1M .005Ω to 1M .005Ω to 1M .005Ω to 1M .005Ω to 1M .005Ω to 1M .005Ω to 1M RCD PV7 5 V1 PW Industry’s widest range! 1mΩ-1M, to ±.05% 10ppm! Built-in standoffs minimize heat transfer to P.C.B. Available on exclusive SWIFTTM delivery program! RoHS RESISTORSCAPACITORSCOILSDELAY LINES D C R PV SERIES - 2 Terminal PVH SERIES - 4 Terminal PWV SERIES - Bracket Mount Term.W is RoHS compliant & 260°C compatible RCD PV5 Significant space savings compared to axial-lead types! PV, PVH, and PWV resistors are designed for power applications where space is at a premium. The PV series offers lowest cost for medium power applications. PVH series are similar except in 4-terminal Kelvin design (to cancel lead wire effect). PWV bracketed resistors enable higher power levels and superior performance in applications involving shock and vibration. The ceramic construction is fireproof and resistant to moisture & solvents. The internal element is wirewound on lower values, power film on higher values (depending on options, e.g. opt. P parts are always WW). If a specific construction is preferred, specify opt.’WW’ for wirewound, opt.’M’ for power film (not available in all values). A B C ±.04 [1.0] ±.04 [1.0] ±.062 [1.6] .450 [11.4] .300 [7.6] .800 [20.3] .475 [12.1] .350 [8.9] .980 [24.9] .500 [12.7] .360 [9.2] 1.00 [25.4] .500 [12.7] .400 [10] 1.52 [38.6] .500 [12.7] .400 [10] 2.02 [51.3] .625 [15.9] .500 [12.7] 1.38 [35.0] .625 [15.9] .500 [12.7] 1.38 [35.0] D E ±.04 [1] ±.005[.12] .197 [5] .028 [.7] .197 [5] .031 [.8] .197 [5] .031 [.8] .197 [5] .031 [.8] .197 [5] .031 [.8] .290 [7.4] .036 [.9] .197 [5] .036 [.9] Wattage Max. Max Current* Std Resis A B C D E Std (Opt.B) Voltage* Std (Opt.B) R an g e ±.04 [1.0] ±.04 [1.0] ±.062 [1.6] ±.04 [1] ±.024[.6] 2W (3W) 80V 14A (17A) .001Ω to 10K .450 [11.4] .300 [7.6] .800 [20.3] .197 [5] .075 [1.91] 3W (5W) 150V 17A (22A) .001Ω to 25K .475 [12.1] .350 [8.9] .980 [24.9] .197 [5] .100 [2.54] 5W (7W) 250V 22A (26A) .001Ω to 30K .500 [12.7] .400 [10] 1.00 [25.4] .197 [5] .100 [2.54] 7W (10W) 350V 26A (32A) .001Ω to 50K .500 [12.7] .400 [10] 1.52 [38.6] .197 [5] .100 [2.54] 10W (12W) 500V 32A (40A) .001Ω to 250K .500 [12.7] .400 [10] 2.02 [51.3] .197 [5] .100 [2.54] 10W (12W) 400V 32A (40A) .001Ω to 250K .625 [15.9] .500 [12.7] 1.38 [35.0] .290 [7.4] .125 [3.18] 10W (12W) 400V 32A (40A) .001Ω to 250K .625 [15.9] .500 [12.7] 1.38 [35.0] .197 [5] .125 [3.18] ← A → F (Nom) .036 [.9] .040 [1] .040 [1] .040 [1] .040 [1] .048 [1.2] .048 [1.2] A Max 1.40 [35.6] 1.86 [47.3] 2.46 [62.5] 2.46 [62.5] 3.02 [76.7] 3.02 [76.7] B ±.04 [1.0] .400 [10] .400 [10] .400 [10] .500 [12.7] .500 [12.7] .500 [12.7] ↓ D F ± .003" Std (Opt.B) .032 (.040) .032 (.040) .032 (.040) .032 (.040) .032 (.040) .032 (.040) .032 (.040) C D E ±.04 [1.0] ±.02 [0.5] ±.06 [1.5] .400 [10] .060 [1.5] .200 [5] .400 [10] .060 [1.5] .200 [5] .400 [10] .060 [1.5] .200 [5] .530 [13.5] .100 [2.5] .265 [6.7] .580 [14.7] .100 [2.5] .275 [7.0] .580 [14.7] .100 [2.5] .275 [7.0] F ±.06 [1.5] .200 [5] .200 [5] .200 [5] .265 [6.7] .295 [7.5] .295 [7.5] * Units not to exceed wattage, voltage, or current rating, whichever is less. Voltage determined by E= √ PR , E not to exceed max voltage rating. Multiply voltage rating by 0.7 for Opt. X. Increased voltage & current ratings available (up to 1KV, 100A). Temp. Coef. PPM/°C (25 ~100/°C) Operating Temp. Dielectric Strength 5 Sec. overload (≤1.5x max V) Moisture Resistance High Temp. Exposure Load Life (1000 hours) Opt X Inductance (reduced inductance levels avail. to 67nH) Temperature Rise Derating (W, V, A) ← .125” min B ↑ C ↓ → ←F D .040” .125” min (.048 opt.B) E Mounting Layout ... lead is terminated to metal bracket . . A .036” ±.005 . E C E .125” min. .022” F TYPICAL PERFORMANCE CHARACTERISTICS PV &PWV Std (Best) PVH Std (Best) N/A 1200ppm (50ppm) 800ppm (50ppm) 600ppm (25ppm) 600ppm (50ppm) 200ppm (25ppm) 500ppm (30ppm) 150ppm (25ppm) 400ppm (20ppm) 90ppm (10ppm) 350ppm (20ppm) 50ppm (10ppm) 200ppm (10ppm) 20ppm (5ppm) -55° to +220° C (275° C avail) 1000V 3X rated wattage (Opt. WW = 5X) 3.0% 1.0% 3.0% Opt.X ≤5W: ≤50Ω=.2uH max, >50Ω=.37uH max Opt. X ≥7W: ≤50Ω =.3uH max, >50Ω = .6uH max 125 to 220°C typ at full rated power Derate by .513%/°C above 25° C E→ F (dia) Mounting Layout ← A → B Res. Range .001-.0049Ω .005-.0099Ω .01-.024Ω .025-.049Ω .05-.099Ω .1 - .99Ω 1Ω & above B ↑ C E SERIES Max. Max Std Resis Wattage PWV Voltage* Current* R an g e PWV5 5 200V 22A .01Ω to 1M PWV7 7 350V 26A .01Ω to 1M PWV10 10 500V 32A .01Ω to 1M PWV15 15 540V 32A .01Ω to 150K PWV20 20 600V 32A .01Ω to 150K PWV25 25 600V 32A .01Ω to 150K RC PV D H1 0 B D(3) .05” dia. .032x.08” 5-15W, .05x.12” 20-25W (3) Mounting Layout P/N DESIGNATION: PV10 - 100 - J B W RCD Type Options: X, WW, P, M, FF, E, B (Leave blank if standard) Resis.Code .05%-1%: 3 signif. figures & multiplier, e.g. R001=.001Ω, R010=.01Ω, R100=.1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1K. Resis.Code 2%-10%: 2 signif. figures & multiplier, e.g. R001=.001Ω, R01=0.01Ω, R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K. Tolerance: A=0.05%, B=0.1%, C=0.25%, D=0.5%, F=1%, G=2%, J=5%(std), K=10% Packaging: B=bulk (standard) Optional TC: 10=10ppm, 20=20ppm, 50=50ppm, 101=100ppm, 201=200ppm, etc. (leave blank if standard) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable, in which case RCD will select based on lowest price and quickest delivery) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA053D Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 48