RoHS FEATURES • Fast switching for high efficiency • Low reverse recovery time • Low forward voltage drop • High current capability • High surge current capability MECHANICAL DATA • Molded plastic body (UL 94V-0 rated) • Axial leads solderable per MIL-STD-202 Method 208 • Polarity: Color band denotes cathode end 260°C/10 seconds/0.375” (9.5mm) lead lengths at 5lbs (2.3kg) tension • Weight: 1.2 gram DO-201AD Dimensions in inches and (millimeters) MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single phase, h alf w ave , 60 H z, r esistive o r i nductive l oad . For capactitive l oad, d erate c urrent b y 20% Symbol FR301 Maximum Repetitive Peak Reverse Voltage V RRM 50 100 200 400 Maximum RMS Voltage V RMS 35 70 140 Maximum DC blocking Voltage V DC 50 100 200 Maximum Average Forward Rectified Current .375” (9.5mm) Lead length @T A =55°C I F(AV) 3.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 150 A VF 1.2 V IR 1.0 150 A Parameter Maximum Instantaneous Forward Voltage@3 . 0 A Maximum DC Reverse Current @ T A =25°C at rated DC Blocking voltage @ T A =100°C Maximun Reverse Recovery Time (Note 1) T RR Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range FR302 FR303 FR306 FR307 Unit 600 800 1000 V 280 420 560 700 V 400 600 800 1000 V FR304 FR305 250 150 40 500 nS °C/W TJ -65 to + 150 °C T STG -65 to + 150 °C Page 1 of 2 C3FR05 2011.10.05 RoHS RATING & CHARACTERISTIC CURVES FIG.2-MAXIMUM FORWARD CURRENT DERATING AV E RAGE FORWARD C U RREN T (A) PE A K FORWARD SURG E C URRE N T (A) FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8.3ms Single half-sine wave JEDEC Method Single phase half wave 60Hz resistive or inductive load 0.375”(9.5mm) Lead Length NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (uA) INSTA NTANEOUS FORWAR D SURGE CU R RENT (A) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TJ=25°C Pulse Width=300us 1% Duty Cycle TJ=125°C TJ=25°C INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG.5-REVERSE RECOVER TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NON-INDUCTIVE (+) 50Vdc (approx) (-) 10W NON-INDUCTIVE DUT PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) NOTES: 1. Rise Time=7ns max. Input Impedance=1megohom 22pF 2. Rise Time=10ns max. Source Impedance=50 ohms. Set Time Base For 5/10ns/cm Page 2 of 2 C3FR05 2011.10.05