BRIDGE RECTIFIER RoHS 6.0 Amps GBJ6005 Thru GBJ610 HOLE FOR NO. 6 SCREW .189(4.8) .173(4.4) FEATURES 1.193(30.3) 1.169(29.7) • UL Recognized • Current 6 Amps • Voltage Range 50V ~ 1000V • Glass passivated chip junction • High surge forward current capability • GBJ available in 6A, 8A, 10A, 15A, .150(3.8) .134(3.4) .800(20.3) .776(19.7) 20A, 25A, 35A and 50A .153(3.9) .165(4.2) .134(3.4) .150(3.8) .708(18.0) .669(17.0) .106(2.7) .096(2.3) .094(2.4) .078(2.0) MECHANICAL DATA • Molded plastic body (UL 94V-0 rated) • Mounting through hole for No. 6 screw • Mounting Torque: recommend 5Kg • cm • Polarity: As marked • Lead: solder plated .043(1.1) .035(0.9) .134(3.4) .122(3.1) DIA .441(11.2) .425(10.8) .228(5.8) .189(4.8) .402(10.2) .386(9.8) .303(7.7) .287(7.3) .031(0.8) .023(0.6) .303(7.7) .287(7.3) GBJ Dimensions in inches and (millimeters) MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load For capactitive load, derate current by 20% Symbol GBJ 6005 GBJ 601 GBJ 602 GBJ 604 GBJ 606 GBJ 608 GBJ 610 Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking Voltage VDC 50 100 200 400 600 800 1000 V Parameter Maximum Average Forward Rectified Current, @TC=110°C (with heat sink) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) 2 Io (AV) 6 A IFSM 150 A AS 2 2 I t for fusing (t < 8.3ms), non-repetitive I t 93 Maximum Instantaneous Forward Voltage @3.0A VF 1.05 V Maximum DC Reverse Current at rated DC Blocking voltage Per Element IR 10 A Typical Thermal Resistance (Note) RqJC 3.4 °C/W Operating Temperature Range TJ -55 to + 150 °C TSTG -55 to + 150 °C Storage Temperature Range NOTE: Thermal Resistance from Junction to Case, with heat sink Page 1 of 2 C3GBJ08 2011.11.30 BRIDGE RECTIFIER GBJ6005 Thru GBJ610 6.0 Amps RoHS RATING & CHARACTERISTIC CURVES FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK F O R WARD SU RG E CURRENT ( A) AVERA G E FOR WARD CURRENT (A) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE heatsink Sine wave R-load with heatsink CASE TEMPERATURE (°C) non-repetitive T J =25°C NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS IN STANTANEOUS REVERSE C UR RENT (uA) I N STANTANE OUS FOR WARD SURGE CURR ENT ( A) Sine wave INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Page 2 of 2 C3GBJ06 2011.11.30