Bulletin 1492 QuickClamp Terminal Blocks Sensor Blocks 1.57" (40 mm) Note: Height dimension is measured from top of rail to top of terminal block. 1492-RTS2LN 1.57" (40 mm) 1492-RTS2 Dimensions are not intended to be used for manufacturing purposes. 0.20" (5 mm) 3.23" (82 mm) Specifications Three-wire sensor block with LED indicator for NPN devices. Three-wire sensor block. Approvals 0.20" (5 mm) 3.23" (82 mm) IEC EEx e II Voltage Rating 50V 50V 60V 30V 50V 50V 60V 30V Maximum Current 10 A 10 A 17.5 A 17.5 A 10 A 10 A 17.5 A 17.5 A #26…#14 AWG (0.2…1.5 mm2) Wire Range (Rated Cross Section) Wire Strip Length Density Insulation Temperature Range Terminal Blocks Color: Gray Accessories (page 185) Mounting Rails: 1 m Symmetrical DIN (Steel) IEC EEx e II #26…#14 AWG (0.2…1.5 mm 2) 0.39" (10 mm) 0.39" (10 mm) 61 pcs./ft (200/m) 61 pcs./ft (200/m) –40…+195°F (–40…+90°C) –40…+195°F (–40…+90°C) Cat. No. Pcs./Pkg. Cat. No. 1492-RTS2 25 1492-RTS2LN Pcs./Pkg. 25 Cat. No. Pcs./Pkg. Cat. No. Pcs./Pkg. 199-DR1 10 199-DR1 10 1 m Symmetrical DIN (Aluminum) 1492-DR5 10 1492-DR5 10 1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR6 2 1492-DR6 2 1 m Angled Hi-Rise Sym. DIN (Steel) 1492-DR7 2 1492-DR7 2 Terminal Cover/Partition Plate 1492-TCS 25 1492-TCS 25 Group Marking Carrier/End Retainer 1492-ER35 50 1492-ER35 50 1492-CJR5-10 10 1492-CJR5-10 10 Center Jumper — 10-pole (blue insulation) 1492-CJR5-10-B 10 1492-CJR5-10-B 10 Center Jumper — 10-pole (red insulation) 1492-CJR5-10-R 10 1492-CJR5-10-R 10 1492-CJR5-10-BR 10 1492-CJR5-10-BR 10 Jumpers: ➊ Center Jumper — 10-pole (gray insulation) Center Jumper — 10-pole (brown insulation) Center Jumper Link 1492-CJRL5 10 1492-CJRL5 10 Other Accessories: Insulation Stop for 0.2 mm2 wire (#26…#24 AWG) 1492-PS3-02 10 1492-PS3-02 10 Insulation Stop for 0.5 mm2 wire (#22…#20 AWG) 1492-PS3-05 10 1492-PS3-05 10 Insulation Stop for 0.75…1.0 mm2 wire (#18 AWG) 1492-PS3-10 10 1492-PS3-10 10 Marking Systems: Snap-In Marker Marking Rod Adhesive Label 9 mm 1492-SM5X9 5 1492-SM5X9 5 9 mm ➋ 1492-MR9 25 1492-MR9 25 9 mm 1492-AL9 1 1492-AL9 1 ➊ Jumpers also available pre-cut in 2-…9-pole configurations. See page 185. ➋ The corners of the terminal blocks may be labelled using a 1492-MR9 marking rod with or without a 1492-AL9 label. Accessories — Page 185 58 Bulletin 1492 QuickClamp Terminal Blocks Sensor Blocks, Continued 1.57" (40 mm) Note: Height dimension is measured from top of rail to top of terminal block. 1492-RTSG2 1.57" (40 mm) 1492-RTS2LP Dimensions are not intended to be used for manufacturing purposes. 0.20" (5 mm) 3.23" (82 mm) Three-wire sensor block with LED indicator for PNP devices. Specifications Approvals IEC 0.20" (5 mm) 3.78" (96 mm) Three-wire sensor block with ground. EEx e II IEC EEx e II Voltage Rating 50V 50V 60V 30V 50V 50V 60V 30V Maximum Current 10 A 10 A 17.5 A 17.5 A 10 A 10 A 17.5 A 17.5 A #26…#14 AWG (0.2…1.5 mm 2) Wire Range (Rated Cross Section) Wire Strip Length Density Insulation Temperature Range Terminal Blocks Color: Gray Accessories (page 185) Mounting Rails: 1 m Symmetrical DIN (Steel) #26…#14 AWG (0.2…1.5 mm2) 0.39" (10 mm) 0.39" (10 mm) 61 pcs./ft (200/m) 61 pcs./ft (200/m) –40…+195°F (–40…+90°C) –40…+195°F (–40…+90°C) Cat. No. Pcs./Pkg. Cat. No. 1492-RTS2LP 25 1492-RTSG2 Pcs./Pkg. 25 Cat. No. Pcs./Pkg. Cat. No. Pcs./Pkg. 199-DR1 10 199-DR1 10 1 m Symmetrical DIN (Aluminum) 1492-DR5 10 1492-DR5 10 1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR6 2 1492-DR6 2 1 m Angled Hi-Rise Sym. DIN (Steel) 1492-DR7 2 1492-DR7 2 Terminal Cover/Partition Plate 1492-TCS 25 1492-TCS 25 Group Marking Carrier/End Retainer 1492-ER35 50 1492-ER35 50 1492-CJR5-10 10 1492-CJR5-10 10 Center Jumper — 10-pole (blue insulation 1492-CJR5-10-B 10 1492-CJR5-10-B 10 Center Jumper — 10-pole (red insulation) 1492-CJR5-10-R 10 1492-CJR5-10-R 10 1492-CJR5-10-BR 10 1492-CJR5-10-BR 10 Jumpers: ➊ Center Jumper — 10-pole (gray insulation) Center Jumper — 10-pole (brown insulation) Center Jumper Link 1492-CJRL5 10 1492-CJRL5 10 Other Accessories: Insulation Stop for 0.2 mm2 wire (#26…#24 AWG) 1492-PS3-02 10 1492-PS3-02 10 Insulation Stop for 0.5 mm2 wire (#22…#20 AWG) 1492-PS3-05 10 1492-PS3-05 10 Insulation Stop for 0.75…1.0 mm2 wire (#18 AWG) 1492-PS3-10 10 1492-PS3-10 10 Marking Systems: Snap-In Marker Marking Rod Adhesive Label 9 mm 1492-SM5X9 5 1492-SM5X9 5 9 mm ➋ 1492-MR9 25 1492-MR9 25 9 mm 1492-AL9 1 1492-AL9 1 ➊ Jumpers also available pre-cut in 2-…9-pole configurations. See page 185 . ➋ The corners of the terminal blocks may be labelled using a 1492-MR9 marking rod with or without a 1492-AL9 label. Accessories — Page 185 59 Bulletin 1492 QuickClamp Terminal Blocks Sensor Blocks, Continued 1.57" (40 mm) Note: Height dimension is measured from top of rail to top of terminal block. 1492-RTSG2LP 1.57" (40 mm) 1492-RTSG2LN Dimensions are not intended to be used for manufacturing purposes. 0.20" (5 mm) 3.78" (96 mm) Three-wire sensor block with LED indicator for NPN devices and ground. Specifications Approvals 0.20" (5 mm) 3.78" (96 mm) Three-wire sensor block with LED indicator for PNP devices and ground. IEC EEx e II Voltage Rating 50V 50V 60V 30V 50V 50V 60V 30V Maximum Current 10 A 10 A 17.5 A 17.5 A 10 A 10 A 17.5 A 17.5 A #26…#14 AWG (0.2…1.5 mm2) Wire Range (Rated Cross Section) Wire Strip Length Density Insulation Temperature Range Terminal Blocks Color: Gray Accessories (page 185) Mounting Rails: 1 m Symmetrical DIN (Steel) IEC EEx e II #26…#14 AWG (0.2…1.5 mm 2) 0.39" (10 mm) 0.39" (10 mm) 61 pcs./ft (200/m) 61 pcs./ft (200/m) –40…+195°F (–40…+90°C) –40…+195°F (–40…+90°C) Cat. No. Pcs./Pkg. Cat. No. 1492-RTSG2LN 25 1492-RTSG2LP Pcs./Pkg. 25 Cat. No. Pcs./Pkg. Cat. No. Pcs./Pkg. 199-DR1 10 199-DR1 10 1 m Symmetrical DIN (Aluminum) 1492-DR5 10 1492-DR5 10 1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR6 2 1492-DR6 2 1 m Angled Hi-Rise Sym. DIN (Steel) 1492-DR7 2 1492-DR7 2 Terminal Cover/Partition Plate 1492-TCS 25 1492-TCS 25 Group Marking Carrier/End Retainer 1492-ER35 50 1492-ER35 50 1492-CJR5-10 10 1492-CJR5-10 10 Center Jumper — 10-pole (blue insulation) 1492-CJR5-10-B 10 1492-CJR5-10-B 10 Center Jumper — 10-pole (red insulation) 1492-CJR5-10-R 10 1492-CJR5-10-R 10 1492-CJR5-10-BR 10 1492-CJR5-10-BR 10 Jumpers: ➊ Center Jumper — 10-pole (gray insulation) Center Jumper — 10-pole (brown insulation) Center Jumper Link 1492-CJRL5 10 1492-CJRL5 10 Other Accessories: Insulation Stop for 0.2 mm2 wire (#26…#24 AWG) 1492-PS3-02 10 1492-PS3-02 10 Insulation Stop for 0.5 mm2 wire (#22…#20 AWG) 1492-PS3-05 10 1492-PS3-05 10 Insulation Stop for 0.75…1.0 mm2 wire (#18 AWG) 1492-PS3-10 10 1492-PS3-10 10 Marking Systems: Snap-In Marker Marking Rod Adhesive Label 9 mm 1492-SM5X9 5 1492-SM5X9 5 9 mm ➋ 1492-MR9 25 1492-MR9 25 9 mm 1492-AL9 1 1492-AL9 1 ➊ Jumpers also available pre-cut in 2-…9-pole configurations. See page 185. ➋ The corners of the terminal blocks may be labelled using a 1492-MR9 marking rod with or without a 1492-AL9 label. Accessories — Page 185 60