Bulletin 1492 IEC Terminal Blocks Standard Feed-Through Blocks 1.78" (45.3 mm) Specifications Approvals EEx e II Voltage Rating Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Density Insulation Temperature Range Terminal Blocks Color: Gray Red Blue Black Green Yellow Orange White Brown Accessories (page 185) Mounting Rails: 1 m Symmetrical DIN (Steel) 1 m Symmetrical DIN (Aluminum) 1 m Hi-Rise Sym. DIN (Aluminum) 1 m Angled Hi-Rise Sym. DIN (Steel) End Barrier End Anchors: DIN Rail — Normal Duty DIN Rail — Heavy Duty Jumpers: Insulated Side Jumper Center Jumper — 50-pole Center Jumper — 40-pole Center Jumper — 10-pole Center Jumper — 3-pole Center Jumper — 2-pole Center Jumper Link Center Jumper Cover – White ➊ Other Accessories: Partition Plate Separation Plate Test Plug Test Plug Adapter Electrical Warning Plate (4-pole) Group Marking Carrier Marking Systems: Snap-in Marker Cards Individual Marker Tabs (single char.) CSA 1.78" (45.3 mm) IEC 600V 800V 550V AC/DC AC/DC 24 A 20 A 24 A #22-#14 0.5-2.5 2 2.5 mm AWG mm2 0.39" (10 mm) 5.0…5.6 lb-in. (0.6 Nm) 61 pcs./ft (200/m) –40…+195°F (–40…+90°C) Pcs./ Cat. No. Pkg. 1492-W3 50 1492-W3-RE 50 1492-W3-B 50 1492-W3-BL 50 1492-W3-G 50 1492-W3-Y 50 1492-W3-OR 50 1492-W3-W 50 1492-W3-BR 50 Pcs./ Cat. No. Pkg. EEx e II CSA 1.87" (47.6 mm) 0.28" (7 mm) Single-circuit terminal block. IEC 600V AC/DC 30 A #22-#10 AWG 600V 800V 550V AC/DC AC/DC 32 A 30 A 32 A #22-#10 0.5-4 2 4.0 mm AWG mm2 0.35" (9 mm) 5.0…5.6 lb-in. (0.6 Nm) 50 pcs./ft (166/m) –40…+195°F (–40…+90°C) Pcs./ Cat. No. Pkg. 1492-W4 50 1492-W4-RE 50 1492-W4-B 50 1492-W4-BL 50 1492-W4-G 50 1492-W4-Y 50 1492-W4-OR 50 1492-W4-W 50 1492-W4-BR 50 Pcs./ Cat. No. Pkg. 10 10 2 EEx e II CSA IEC 600V AC/DC 40 A #22-#10 AWG 600V 800V 550V AC/DC AC/DC 41 A 40 A 41 A #22-#10 0.5-6 2 6.0 mm AWG mm2 0.47" (12 mm) 5.6…6.8 lb-in. (0.7 Nm) 43 pcs./ft (142/m) –40…+195°F (–40…+90°C) Pcs./ Cat. No. Pkg. 1492-W6 50 1492-W6-RE 50 1492-W6-B 50 1492-W6-BL 50 1492-W6-G 50 1492-W6-Y 50 1492-W6-OR 50 1492-W6-W 50 1492-W5-BR 50 Pcs./ Cat. No. Pkg. 10 10 2 199-DR1 1492-DR5 1492-DR6 1492-DR7 2 1492-DR7 2 1492-DR7 2 1492-EB3 50 1492-EB3 50 1492-EB10 50 199-DR1 1492-DR5 1492-DR6 10 10 2 1492-EA35 50 1492-EA35 50 1492-EA35 50 1492-EAH35 10 10 10 5 — 10 10 10 10 20 10 50 10 5 — 10 10 10 10 20 1492-EAH35 1492-SJ5-10 (10-pole) 1492-CJ5-50 — 1492-CJ5-10 1492-CJ5-3 1492-CJ5-2 1492-CJL5 1492-CJCW5 1492-EAH35 1492-N42 (2-pole) 1492-SJ6-10 (10-pole) 1492-CJ6-50 — 1492-CJ6-10 1492-CJ6-3 1492-CJ6-2 1492-CJL6 1492-CJCW6 — — 1492-CJ7-40 1492-CJ7-10 1492-CJ7-3 1492-CJ7-2 1492-CJL7 1492-CJCW6 — — 5 10 10 10 10 20 1492-PP3 1492-SP3 — 1492-TA285 1492-EWP5-4 1492-GM35 1492-SM5X9 1492-SM5X12 50 50 — 10 10 10 1492-PP3 1492-SP3 1492-TP28 1492-TA40 1492-EWP6-4 1492-GM35 50 50 10 10 10 10 1492-PP10 — 1492-TP28 1492-TA40 1492-EWP7-4 1492-GM35 50 — 10 10 10 10 5 1492-SM6X12 5 1492-SM6X12 5 1492-MP5 ➋ 5 1492-MP ➋ 5 1492-MP ➋ 5 ➊ May only be used as a marking surface. Cannot be installed over a center jumper. ➋ Cat. no. is not complete. See page 186. 18 0.24" (6 mm) Single-circuit terminal block. 600V AC/DC 20 A #30-#14 AWG 199-DR1 1492-DR5 1492-DR6 1.61" (41 mm) 0.20" (5 mm) Single-circuit terminal block. Maximum Current 1492-W6 1.38" (35 mm) Note: Height dimension is measured from top of rail to top of terminal block. 1492-W4 1.38" (35 mm) 1492-W3 Dimensions are not intended to be used for manufacturing purposes. Bulletin 1492 IEC Terminal Blocks Standard Feed-Through Blocks, Continued Single-circuit terminal block. Approvals Voltage Rating Maximum Current Wire Range (Rated Cross Section) Wire Strip Length Recommended Tightening Torque Density Insulation Temperature Range Terminal Blocks Color: Accessories 1.87" (47.6 mm) 0.43" (11 mm) Single-circuit terminal block. EEx e II CSA IEC 600V AC/DC 550V 600V AC/DC 800V AC/DC 50 A 50 A 50 A 10 mm2 #22… #8 AWG #22… #8 AWG 2.17" (55 mm) 0.31" (8 mm) 1.87" (47.6 mm) Specifications 1492-W16 1.61" (41 mm) Note: Height dimension is measured from top of rail to top of terminal block. 1492-W16S 1.61" (41 mm) 1492-W10 Dimensions are not intended to be used for manufacturing purposes. 0.43" (11 mm) 2.17" (55 mm) Single-circuit terminal block. EEx e II CSA IEC CSA IEC 600V AC/DC 550V 600V AC/DC 800V AC/DC 600V AC/DC 600V AC/DC 57 A 85 A 96 A 85 A 750V AC/DC 76 A 70 A 105 A 0.5… 10 mm2 #14… #4 AWG 16 mm2 #14… #4 AWG 85 A 2.5… 16 mm 2 #14… #4 AWG #14… #4 AWG 1.5… 16 mm2 0.51" (13 mm) 0.51" (13 mm) 0.51" (13 mm) 12.2…13.4 lb-in. (1.4 Nm) 18…20 lb-in. (2.1 Nm) 22.1 lb-in. (2.5 Nm) 38 pcs./ft (125/m) 27 pcs./ft (90/m) 27 pcs./ft (90/m) –40…+195°F (–40…+90°C) –40…+195°F (–40…+90°C) –40…+195°F (–40…+90°C) Cat. No. Pcs./Pkg. Cat. No. Pcs./Pkg. Cat. No. Pcs./Pkg. Gray 1492-W10 50 1492-W16S 50 1492-W16 50 Red 1492-W10-RE 50 1492-W16S-RE 50 — — Blue 1492-W10-B 50 1492-W16S-B 50 1492-W16-B 50 — Black 1492-W10-BL 50 1492-W16S-BL 50 — Green 1492-W10-G 50 1492-W16S-G 50 — — Yellow 1492-W10-Y 50 1492-W16S-Y 50 1492-W16-Y 50 Orange 1492-W10-OR 50 1492-W16S-OR 50 — — White 1492-W10-W 50 1492-W16S-W 50 — — Brown 1492-W10-BR 50 1492-W16-BR 50 — — Cat. No. Pcs./Pkg. Cat. No. Pcs./Pkg. Cat. No. Pcs./Pkg. (page 185) Mounting Rails: 1 m Symmetrical DIN (Steel) 199-DR1 10 199-DR1 10 199-DR1 10 1 m Symmetrical DIN (Aluminum) 1492-DR5 10 1492-DR5 10 1492-DR5 10 1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR6 2 1492-DR6 2 1492-DR6 2 1 m Angled Hi-Rise Sym. DIN (Steel) 1492-DR7 2 1492-DR7 2 1492-DR7 2 1492-EB10 50 1492-EB10 50 1492-EB16 50 End Anchors: DIN Rail — Normal Duty 1492-EA35 50 1492-EA35 50 1492-EA35 50 DIN Rail — Heavy Duty 1492-EAH35 10 1492-EAH35 10 1492-EAH35 10 — End Barrier Jumpers: Side Jumper — 10-pole Insulated 1492-SJ8-10 10 — — — Center Jumper — 40-pole 1492-CJ8-40 5 — — — — Center Jumper — 10-pole 1492-CJ8-10 10 1492-CJS11-10 10 1492-CJ11-10 10 Center Jumper — 3-pole 1492-CJ8-3 10 1492-CJS11-3 10 1492-CJ11-3 10 Center Jumper — 2-pole 1492-CJ8-2 10 1492-CJS11-2 10 1492-CJ11-2 10 Center Jumper Link 1492-CJL8 10 — — — — 1492-CJCW6 20 — — — — Center Jumper Cover — White ➊ Other Accessories: Partition Plate 1492-PP10 50 1492-PP10 50 1492-PP16 50 Test Plug 1492-TP28 10 — — — — Test Plug Adapter 1492-TA40 10 1492-TA40L 10 — — 1492-EWP8-4 10 1492-EWP11-4 10 1492-EWP11-4 10 1492-GM35 10 1492-GM35 10 1492-GM35 10 1492-SM8X12 5 1492-SM6X12 5 1492-SM6X12 5 1492-MP ➋ 5 1492-MP ➋ 5 1492-MP ➋ 5 Electrical Warning Plate (4-pole) Group Marking Carrier Marking Systems: Snap-in Marker Card Individual Marker Tabs (single char.) ➊ May only be used as a marking surface. Cannot be installed over a center jumper. ➋ Cat. no. is not complete. See page 186. 19 Bulletin 1492 IEC Terminal Blocks Standard Feed-Through Blocks, Continued 2.80" (71 mm) Note: Height dimension is measured from top of rail to top of terminal block. 1492-W70 2.80" (71 mm) 1492-W35 Dimensions are not intended to be used for manufacturing purposes. 2.36" (60 mm) Specifications 0.55" (14 mm) Single-circuit terminal block. Approvals Maximum Current Wire Range (Rated Cross Section) Single-circuit terminal block. CSA IEC CSA IEC 750V AC/DC 600V AC/DC 600V AC/DC 750V AC/DC 125 A 140 A 138 A 200 A 310 A 175 A #14… 1/0 AWG #14… 1/0 AWG 2.5… 35 mm2 #4… 3/0 AWG #4… 3/0 AWG 4… 70 mm2 Wire Strip Length Recommended Tightening Torque Density Insulation Temperature Range 0.67" (17 mm) 1.02" (26 mm) 22.1 lb-in. (2.5 Nm) 132.8 lb-in. (15 Nm) 21 pcs./ft (71/m) 13 pcs./ft (43/m) –40…+195°F (–40…+90°C) –40…+195°F (–40…+90°C) Cat. No. Pcs./ Pkg. Cat. No. Gray 1492-W35 10 1492-W70 5 Red — — — — Blue 1492-W35-B 10 1492-W70-B 5 Black — — — — Terminal Blocks Color: 0.91" (23 mm) 600V AC/DC 600V AC/DC Voltage Rating 2.91" (74 mm) Pcs./ Pkg. Green — — — — Yellow 1492-W35-Y 10 — — Orange — — — — Cat. No. Pcs./ Pkg. Cat. No. Pcs./ Pkg. Accessories (page 185) Mounting Rails: 1 m Symmetrical DIN (Steel) 199-DR1 10 199-DR1 10 1 m Symmetrical DIN (Aluminum) 1492-DR5 10 1492-DR5 10 1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR6 2 1492-DR6 2 1 m Angled Hi-Rise Sym. DIN (Steel) 1492-DR7 2 1492-DR7 2 1492-EB35 25 Not Required — End Barrier End Anchors: DIN Rail — Normal Duty DIN Rail — Heavy Duty Jumpers: Side Jumper — 10-pole Insulated 1492-EA35 50 — — 1492-EAH35 10 1492-EAH35 10 — — — — Center Jumper — 10-pole — — — — Center Jumper — 3-pole 1492-CJ14-3 10 — — Center Jumper — 2-pole 1492-CJ14-2 10 — — — — — — 1492-PP35 25 — — — — — — 1492-TA40L 10 — — 1492-EWP14-4 10 — — 1492-GM35 10 1492-GM35 10 1492-SM6X12 5 1492-SM6X12 5 1492-MP ➊ 10 1492-MP ➊ 10 Center Jumper Link Other Accessories: Partition Plate Test Plug Test Plug Adapter Electrical Warning Plate (4-pole) Group Marking Carrier Marking Systems: Snap-in Marker Cards Individual Marker Tabs (single char.) ➊ Cat. no. is not complete. See page 186. Accessories — Page 185 20