Ordering Information Description Cat. No. Basic Unit 825-PD User Manual 825-UM004A-EN-P 1 Converter Module 0.5 ... 2.5A 825-MCM2 2.5 ... 20A 825-MCM20 20 ... 180A 825-MCM180 160 ... 630A 825-MCM630N Core Balance Current Transformer (100:1) 825-CBCT RTD Scanner Module 825-PR12D Option Cards 1 Voltage Input 825-PVS Expansion I/O (120V Inputs) 825-PIOD Expansion I/O (24V Inputs) 825-PIOR DeviceNet Communications 825-PDN Modbus Communications 825-PMB The user manual ships separate from the Basic Unit. Please order from www.theautomationbookstore.com. Function Overview Trip Level Setting Range Trip Delay Setting Range Warning Level Setting Range Motor FLA (le) 0.5...5000A – – Locked Rotor Current 2.5...12 x le – 50...100% TCU Locked Rotor Time 1...600 sec – – Short Circuit 4...12 x le 0.00...5.00 sec 4...12 x le 0.1...1.0 x le 0.00...5.00 sec 0.1...1.0 x le 0.01...25A 0.00...5.00 sec 0.01....25A Jam 1.0....6.0 x le 0.00...5.00 sec 1.0...6.0 x le Undercurrent 0.1...1.0 x le 0.0...120.0 sec 0.1...1.0 x le 5...80% 0....240 sec 5...80% – 1....240 sec 0...250 ˚C – Disable, Enable – Undervoltage 0.60...1.00 x Vnom 0...120 sec 0.6...1.0 x Vnom Overvoltage 1.00...1.20 x Vnom 0...120 sec 1.00...1.20 x Vnom Underpower 1...25,000 kW 0...240 sec 1...25,000 kW Power Factor 0.05...0.99 0...240 sec 0.05...0.99 1...25,000 kVAR 0...240 sec 1...25,000 kVAR 45...55 / 55...65 Hz 0...240 sec 45...55 / 55...65 Hz 1...15 – – – 0.240 sec – Description Ground Fault (Residual) Ground Fault (Core Balance) Current Imbalance Start Monitoring RTD Temp Phase Reversal VAR Frequency Start Inhibit (Starts/Hr) Speed Switch 0...250 ˚C