1305 Dimensions and Mounting Requirements

AA12A
AA18A
AA08A
AA02A
AA03A
AA040
200/230 V
Cat. No.
1305
BA01A
BA02A
BA03A
BA04A
BA06A
BA09A
380/460 V
Cat. No.
1305B
Height
195
(7-11/16)
195
(7-11/16)
195
(7-11/16)
195
(7-11/16)
A
Width
120
(4-23/32)
120
(4-23/32)
170
(6-11/16)
210
(8-1/4)
179
(7-1/16)
122
(4-13/16)
140
(5-1/2)
179
(7-1/16)
C
Depth
w/o Pot
184.1
(7-1/4)
127.1
(5)
145.1
(5-23/32)
184.1
(7-1/4)
C’
Depth
w/ Pot
200
(7-7/8)
110
(4-11/32)
110
(4-11/32)
160
(6-5/16)
D
180
(7-1/16)
180
(7-1/16)
180
(7-1/16)
180
(7-1/16)
E
66
(92-19/32)
9
(11/32)
27
(1-1/16)
66
(2-19/32)
F
Dimensions shown in millimeters (inches). Shipping weights shown in kilograms (pounds).
Bulletin 1305 Approximate Dimensions
113
(4-7/16)
113
(4-7/16)
113
(4-7/16)
113
(4-7/16)
G
5
(7/32)
5
(7/32)
5
(7/32)
5
(7/32)
H
1305 Dimensions and Mounting Requirements
7.5
(5/16)
7.5
(5/16)
7.5
(5/16)
7.5
(5/16)
J
4.2
(9.2)
1.6
(3.5)
1.9
(4.2)
3.6
(8.0)
Approx.
Ship Wt.
IMPORTANT: The drive must be mounted to a metallic surface.
will overrule this information. The Allen-Bradley Company cannot assume the responsibility for the compliance or the noncomplience to any code, national, local
or otherwise for the proper installation of this drive or associated equipment. A hazard of personal injury and/or equipment damage if codes are ignored during
installation.
ATTENTION: The following information is mearly a guide for proper installation. The National Electrical Code and any other governing regional or local code
Mounting Requirements