Pixie Configuration Tool TM TTL-level serial to USB interface with 5V power supply FlexiPanel Summary The Pixie Configuration tool is a USB to TTL-level serial adapter for use with Pixie ZigBee and LinkMatik / Toothpick Bluetooth devices. It connects directly to a PC USB socket. USB driver software is supplied. On the PC, the tool looks like a COM port can is compatible with Windows serial port applications such as Windows HyperTerminal. Specifications USB Gnd (Black) Tx (Red) Rx (Blue) +5V (Yellow) Pixie Config Tool Features • Wide variety of baud rates • Includes +5.0V 50mA power supply • Standard 0.1 inch formed pin connector • No flow control • Looks like a COM port on the PC • USB driver disk supplied • Requires Windows 98se, 2000, ME or XP Pin 1 2 3 4 Wire Black Red Blue Yellow Function Ground PC Serial Tx (TTL RxD) PC Serial Rx (TTL TxD) +5V Baud rates Output voltage Output current Input low Input high Temperature range Tx drive current Mating Connector 300 – 921600 5.0V ± 0.75V (note 1) 50mA (note 1) ≤ 0.8V ≥ 2.0V -40°C to +85°C 8mA 0.1” formed pin header e.g. Farnel P/N 1022251 1. If connected to a hub, the hub must be powered. • Short circuit protected Ordering Information Part No PIXIECONFIG Description TTL-level serial to USB interface with 5V power supply FlexiPanel Page 1 12-Mar-06 Pixie products developed by: Distributed by: FlexiPanel Ltd Suite 120, Westbourne Studios 242 Acklam Road London W10 5JJ, United Kingdom www.flexipanel.com Tel +44 (0) 207 524 7774 email: [email protected] R F Solutions Ltd Unit 21, Cliffe Industrial Estate, Lewes, BN8 6JL, United Kingdom email : [email protected] http://www.rfsolutions.co.uk Tel: +44 (0)1273 898 000 Pixie Configuration Tool DS 485-1 © FlexiPanel Ltd www.FlexiPanel.com