The Y-811 is a planar triode intended for use as high voltage series regulator or switch tube. The compact, low inductance package allows fast rise and fall times and very short pulse operation. The plate is conduction-cooled and rated at 1000 Watts when used with the proper heatsink. When immersed in oil the maximum plate voltage rating is 65 kilovolts. Characteristics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 1,000 Watts N/A 1.5 Watts N/A 950 Oxide 6.3 Volts 2.25 Amps Grounded Cathode 15.0 pf 0.003 pf 2.0 pf N/A N/A N/A N/A Conduction Special N/A N/A N/A 2.83 in; 7.175 cm 3.01 in; 7.65 cm 18.34 oz; 520 gm Maximum RatingsTypical Operation Class of Type of ServicePlate PlatePlateScreenPlate Operation VoltageCurrent Voltage VoltageCurrent (Volts) (Amps) (Volts) (Volts) (Amps) ---Switch Tube or Pulse Modulator 65,000 10 --- --- --- Drive Output PowerPower (Watts) (kiloWatts) --- --- The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI MPP products, visit our website at: www.cpii.com, or contact: CPI Microwave Products Division, Eimac Operation,607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : [email protected] CPI | Y-811 4CW50,000J Y-811