Indico 100 SP matrix.indd - Communications & Power Industries

Indico 100®
G E N E R AT O R P E R F O R M A N C E M AT R I X
GENERATOR PERFORMANCE MATRIX
Product Name
Application
Generator Type
kV (Radiographic)
kV (Fluoroscopic)
mA Range RAD
mA Range FLUORO1
Rotor Supply
Line Nominal/Phase
Line Voltage Range
High Voltage Ripple (typ.)
Number of X-Ray Tubes
Timer Rang, Programmable
Anatomical Programs6
mAs Range Non AEC3*
Number of Image Receptors
Technique Selection
Exposure Hand Switch
Documentation5
GenWare® Service Software
Indico 100® SP (80 kW)
RF, Multi Purpose & Angiographic
Special Procedures.
High Frequency Output 200 kHz +
40 – 150 kV
40 – 125 kV
10 – 1000 mA
0.5 – 10 mA continuous
Dual Speed – Standard
3 Ø 400 or 480 VAC
± 10%
<1 kV @ 100 kV
1 Tube Capability
*
20,000 techniques capacity plus
0.1 – 1000 mAs
6
1. kV with AEC option
2. kV/mAs
3. kV/mA/Time
Standard
Manual or CD
Yes
Indico 100® SP (100 kW)
RF, Multi Purpose & Angiographic
Special Procedures.
High Frequency Output 200 kHz +
40 – 150 kV
40 – 125 kV
10 – 1000 mA
0.5 – 10 mA continuous
Dual Speed – Standard
3 Ø 400 or 480 VAC
± 10%
<1 kV @ 100 kV
1 Tube Capability
*
20,000 techniques capacity plus
0.1 – 1000 mAs
6
1. kV with AEC option
2. kV/mAs
3. kV/mA/Time
Standard
Manual or CD
Yes
Yes
Yes
Ionization, PMT, or Solid State
PMT, Photo Diode, Video or Proportional DC
Up to 20 mA
Up to 40 mA
Up to 80 mA
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ionization, PMT, or Solid State
PMT, Photo Diode, Video or Proportional DC
Up to 20 mA
Up to 40 mA
Up to 80 mA
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
OPTIONS
Touch Screen Console
Touch Screen Console Wall Mount
AEC Interface
ABS Interface
High Level Continuous Fluoroscopy
Pulsed Fluoroscopy
High Level Pulsed Fluoroscopy4
kV/mAs Stepping
DR/CR/RF Interfaces 2 *
CINE2 *
CINE2 * (IS0 Watt Mode)
Dose Area Product (DAP) Interface
Air Kerma Readout
Second Tube Capability
Wheels5
Custom Interfaces*
Active Dose Reduction (ADR)
3 Dose and Transfer Curves
S.I.D. Compensation*
Tri-Focus Operation *
Second Filament Drive
Cabinet Wiring Cover*
Auxiliary Collimator Power*
* Consult Factory for details.
1. Maximum Fluoroscopic kV is 125 kV – programmable to 110 kV
for European requirements.
2. Compatible with Digital Imaging System – Consult Factory.
3. The mAs limit may be de-rated by software.
4. Consult Factory for higher mA values.
5. To be identified on order.
6. Touchscreen specification only.
®
0366
NRTL/C
L397383
XRAY204 01/08








 Wheels (Optional)

 
 





Indico 100® RF Console










Wall Mount (Optional)
All dimensions are in mm [inches]









CPI Touch Screen Console
(Optional)




Auxiliary Cabinet
(Optional)
Desktop Base
(Optional)
Communications & Power Industries Canada Inc.
communications & medical products division
45 River Drive / Georgetown, Ontario / Canada L7G 2J4
Hot Line Telephone: 1-888-CPI-XRAY
TEL: 905-877-0161 / FAX: 905-877-5327

E-MAIL: [email protected]
WEB: www.cpii.com/cmp