TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC FIGURE 1: SCHEMATIC DIAGRAM 2 SPEC LIMITS MIN. TYP. M AX. UNITS PRIMARY INDUCTANCE (4-3) FREQ. = 100 KHZ @ 0.4Vrms 2250 2400 2550 HY LEAKAGE IND (4-3). (TIE 8-7) FREQ. = 100 KHZ @ 0.250Vrms -------- -------- 100 HY PARAMETER BIAS 1 3 PRIMARY TURN RATIO'S: 4-3:7-8 4-3:1-2 -------- 9.5:1 -------- 2.92:1 --------------- + 3% + 3% PRIMARY RESONANT FREQUENCY 300 -------- -------- kHz HIPOT: PRIMARY TO SECONDARY 3000 -------- -------- Vrms 4 8 SECONDARY 7 3 SHIELD #1 NC FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) 8 WHITE DOT DENOES PIN#1 1 7 2 6 3 5 4 15.00 (.59) MAX 18.54 (.730) MAX P PNK-52001 M YYWW CORE TAPED 14.6 (.575) MAX 4.0 (.157) 3.81 (.150) 1 2 3 0.6 (.023) NOTE1: 4 A) ALL MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B)TRIPLE BASIC INSULATED SECONDARY C) VARNISH FINISHED ASSEMBLY. 12.5 (.492) 8 7 6 REV. DESCRIPTION OF CHANGES BY 02/10/09 OGIRINAL RELEASE PP 5 UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + .25 +0 O 30' .XX + .15 DO NOT SCALE DRAW ING TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-52001 REVISION: 02/10/09 ENGR: PETER PHAM REF: LNK-520 SCALE: NONE SHEET: 1 OF 1