TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC FIGURE 1: SCHEMATIC DIAGRAM 3 SPEC LIMITS MIN. TYP. MAX. UNITS PRIMARY INDUCTANCE (5-6). At 100KHz and 1.0 Vrms. 1.55 H LEAKAGE INDUCTANCE (5-6). At 100KHz and 1.0 Vrms. ------- -------- 60 H NC RESONANT FREQUENCY (5-6). Other windings open. 500 -------- ------- KHz C. SHIELD PARAMETER BIAS TURNS 5-6 : 5-6 : 3-4 : 1.68 1.80 4 5 RATIO: FL1-FL2. 3-4. FL1-FL2. HI-POT: 60 Hz for 1 sec. PRIMARY to SECONDARY. -------- 8.44 : 1 -------- 7.94 : 1 -------- 1.06 : 1 ---------------------- +3% +3% +3% 3000 -------- VRMS -------- FL1 SECONDARY FL2 PRIMARY 6 FIGURE 2: PHYSICAL DIMENSIONS IN INCHES, (mm) 10 6 1 PIN#1 I.D. ON BOBBIN 5 13.5 (.532) Max. P M CORE TAPED 13.6 (.535) Max. PNK-10035 YYW W 1 5 2.5 (.098) 25.0 (1.0) 7.7 (.303) Max. FL1 3.5 (0.14) Typ. 5 0.6 (0.024) FL2 6 10.5 (.413) NOTES: 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements of UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. REV. DESCRIPTION OF CHANGES BY 08/12/13 Original release. KC RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN mm. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + 0.25 + 5O .XX + 0.15 DRAW ING NOT TO SCALE. TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-10035 REVISION: 08/12/13 ENGR: PETER PHAM REF: LNK604DG QA: Kevin Clark SHEET: 1 OF 3