TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC FIGURE 1: SCHEMATIC DIAGRAM 2 SPEC LIMITS MIN. TYP. MAX. UNITS PRIMARY INDUCTANCE 4-2 V = 0.250Vrms, F = 100 KHZ 936 1040 1144 uH Y LEAKAGE 4-2, TIE OTHER V = 0.250Vrms, F = 100 KHZ 30 -------- -------- uH Y PARAMETER PRIMARY 1 7 ([email protected]) 3 PRIMARY 2 TURN RATIO'S: 4-2 : 6-5 4-2 : 7-9 POLARITY PER DOT --------------- 7.77:1 8.75:1 --------------- + 3% + 3% SECONDARY #1 11 ([email protected]) 4 SECONDARY #2 RESONANT FREQUENCY POLARITY PER DOT 1000 -------- -------- 5 KhZ 9 BIAS HIP OT: PRIMARY TO SECONDARY 3750 -------- -------- Vrms 6 FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) 30.0 (1.18) MAX 30.5 (1.200) MAX WHITE DOT OVER PIN#1 P M 2.7 (.106) POL-HX022 YYWW 23.62 (0.93) MAX 1 5.0 (.197) 0.8 (.032) 6 25.0 (.984) 3 4 1 5 6 * Design to comply with the requirements of UL/CSA/IEC 60950-1. * Design to comply with the requirements of UL, IEC & CSA Insulation System Class B. * All units comply with the requirements of EU RoHS Directive. * All materials per Premier Magnetics UL file #E177139.AllCOC 25.0 (.984) 12 11 10 9 8 7 REV. 10/10/12 DESCRIPTION OF CHANGES ORIGINAL RELEASE RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + .25 +0 O 30' .XX + .15 DO NOT SCALE DRAWING TRANSFORMER CONTROL DRAWING PREMIER P/N: POL-HX022 REVISION: 10/10/12 ENGR: PETER PHAM REF: TOP 258PN QA: KEVIN CLARK SHEET: 1 OF 1 BY PP