1 TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC FIGURE 1: SCHEMATIC DIAGRAM 1 SPEC LIMITS MIN. TYP. MAX. PARAMETER INDUCTANCE (1-7). VOLTAGE = 0.40 Vrms. FREQUENCY = 100 KHz. 930 RESONANT FREQUENCY (1-7). All other windings are open. 1000 900 --------- UNITS 1070 uH -------- KHz 7 2 FIGURE 2: PHYSICAL DIMENSIONS Inches (mm) 12 1 2 WHITE DOT DENOTES PIN#1 SIDE OF BOBBIN 12 11 3 P M 10 PNK-10032 YYWW 4 CORE CLIPS, 2EA 9 5 8 6 7 1.00 (25.4 Max. 1.00 (25.4 Max. DIRECT SIDE VIEW DIRECT FRONT VIEW 0.67 (17.0) Max. .13 (3.3) .024 (.61) DIA. 0.028 (0.70) .100 (2.54) NOTES: .100 (2.54) 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements if UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. 5) Cut off the Bobbin terminal pins 3, 4, 5, 6,10,and 11. .014 (.356) HOLES FO R BO BBIN LEADS HOLES FO R CLIP PINS REV. DESCRIPTION OF CHANGES BY 07/29/13 Orignal release. KC RoHS UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN Inches. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .XX + 0.02 +0 O 30' .XXX + 0.010 DRAW ING NOT TO SCALE. INDUCTOR CONTROL DRAWING PREMIER P/N: PNK-10032 REVISION: 07/30/13 ENG: PETER PHAM REF: LNK419EG QA: Kevin Clark SHEET: 1 OF 3