TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC PARAMETER MIN. PRIMARY INDUCTANCE (2-6). @ 100 KHz, 0.40 Vrms. 306 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. MAX. 330 354 2 UNITS uH WDG 1 RESONANT FREQUENCY (2-6). All other windings open. 2.0 --------- --------- MHz 6 FIGURE 2: PHYSICAL DIMENSIONS IN INCHES, (mm) 5 4 3 6 1 2 WHITE DOT DENOTES PIN#1 SIDE OF BOBBIN .81 (20.6) Max. .803 (20.4) Max. .510 (12.95) Max. .10 (2.54) Min. .024 (.61) DIA. .028 (.71) NOTES: 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements of UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. REV. 07/24/13 DESCRIPTION OF CHANGES Original release. RoHS UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN Inches. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .XX + .02 + 0 O 30' .XXX + .015 DRAW ING NOT TO SCALE. INDUCTOR CONTROL DRAWING PREMIER P/N: PNK-10026 REVISION: 07/24/13 ENG: PETER PHAM REF: LNK460VG QA: Kevin Clark SHEET: 1 OF 1 BY KC