FL1 TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC FIGURE 1: SCHEMATIC DIAGRAM 1 SPEC LIMITS MIN. TYP. MAX. PARAMETER PRIMARY INDUCTANCE (1-7) FREQ. = 100 KHZ @ 0.40Vrms 0.93 TURN RATIO'S: 1-7 : 6-8 1-7 : FL1-FL2 RESONANT FREQUENCY (1-7). Other windings open. 1.0 UNITS 1.07 PRIMARY mH --------------- 3.52 : 1 2.51 : 1 --------------- +4% +4% 1000 --------- --------- KHz 7 200 -------- -------- SECONDARY 6 BIAS HIPOT: 60 Hz for 1 sec. PRIMARY and BIAS to SECONDARY. FL1 FL2 Vrms 8 FIGURE 2: PHYSICAL DIMENSIONS Inches (mm). FL1 FL2 T0 LY L- W PO YW Y PM 24 CORE CLIPS, 2EA WHITE DOT DENOTES PIN#1 SIDE OF BOBBIN .925 (23.5) Max. .925 (23.5) Max. DIRECT SIDE VIEW DIRECT FRONT VIEW .570 (14.5) M.ax. 0.22 (5.5) 0.03 (0.80) Dia. 0.022 (0.55) NOTES: 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements if UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. REV. DESCRIPTION OF CHANGES BY 07/01/13 Original Release. KC RoHS RM7 P Premier M Magnetics Inc. "INNOVATORS IN MAGNETICS TECHNOLOGY" UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN Inches. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .XX + 0.02 +0 O 30' .XXX + 0.010 DRAW ING NOT TO SCALE. IND CONTROL DRAWING PREMIER P/N: POL-LYT024 REVISION: 06/28/13 ENG: PETER PHAM REF: LYT4314E QA: Kevin Clark SHEET: 1 OF 2