M1_7 Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features • The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 • For surface mounted applications • Low reverse leakage • Built-in strain relief, ideal for automated placement • High forward surge current capability • High temperature soldering guaranteed: 250°C/10 seconds at terminals • RoHS compliant package Mechanical Data • Case: JEDEC DO-214AC molded plastic body • Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 • Polarity: Color band denotes cathode end • Mounting Position: Any • Weight:0.003 ounce, 0.065 grams Graphic symbol Packing & Order Information 5,000/Reel MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specifie. Single phase, half wave, 60 Hz, resistive or inductive load For capacitive load, derate current by 20% Rating Symbol M1 M2 M3 M4 M5 M6 M7 Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current Tc = 50°C Typical Thermal Resistance (Note 2) Publication Order Number: [M1_7] IF(AV) 1.0 A RθJA 27 °C/W © Bruckewell Technology Corporation Rev. A -2014 M1_7 Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Rating at 25 °C ambient temperature unless otherwise specifie. Single phase, half wave, 60 Hz, resistive or inductive load For capacitive load, derate current by 20% Rating Symbol KBL 400 KBL 401 KBL 402 KBL 404 KBL 406 KBL 408 KBL 410 Unit Peak Forward Surge Current, Single half sine wave Superimposed on rated load IFSM 30 V VF 1.1 V 5 V 200 A CJ 15 °C TJ,TSTG -65 to +150 °C (JEDEC Method) Maximum Forward Voltage per Diode at F = 1.0 A Maximum DC Reverse Current Ta = 25°C at Rated DC Blocking Voltage Ta = 100°C Typical Junction capacitance (Note 1) Operating junction and storage temperature range IR NOTE: 1.Pulse test: Pulse width 300us, duty cycle 1% Publication Order Number: [M1_7] © Bruckewell Technology Corporation Rev. A -2014 M1_7 Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere ■RATING AND CHARACTERISTIC CURVES FIG.1 – FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.3 - TYPICAL INSTANTANEOUS FORWARD FIG.4 - TYPICAL REVERSE CHARACTERISTICS CHARACTERISTICS FIG.5 - TYPICAL JUNCTION CAPACITANCE Publication Order Number: [M1_7] FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE © Bruckewell Technology Corporation Rev. A -2014 M1_7 Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [M1_7] © Bruckewell Technology Corporation Rev. A -2014