GS1010FL - Bruckewell Semi

GS1010FL
Product profile
Surface Mount High Current Density Diode
General description
Rectifiers 1.0 Amp 1000V
Features
Low forward voltage
Reverse energy tested
High current capability
Extremely low thermal resistance
Mechanical data
Case:
SOD-123S Molded plastic
Epoxy: UL94V-O rate flame retardant
Lead: Lead Formed for Surface Mount
Polarity: Color band denotes cathode end
Mounting position: Any
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Symbol
GS1010FL
Unit
Maximum repetitive peak reverse voltage
VRRM
1000
V
RMS Voltage (Max.)
VRMS
700
V
Working peak reverse voltage
VRWM
1000
V
Maximum average forward rectified current
IF(AV)
1.0
A
IFSM
30
A
TJ
-55 to +150
°C
TSTG
-55 to +150
°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Operating junction temperature range
Storage temperature range
THERMAL CHARACTERISTICS
Parameter
Symbol
Value
Unit
Typical thermal resistance
RθJA
42
°C/W
Notes:
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
Publication Order Number: GS1010FL
©Bruckewell Technology Corporation Rev. A -2014
GS1010FL
Electrical characteristics (Tc=25°C unless otherwise noted)
OFF CHARACTERISTICS
Parameter
Symbol
Instantaneous forward voltage
at IF=1A, Tj=25°C
VF
Value
Unit
Typical
Max
0.94
1.0
V
Maximum reverse current
Tj=25°C
IR
at working peak reverse voltage Tj=125°C
Junction Capacitance @ DC 5V
CJ
2
u'A
2
m'A
4
pF
DEVICE MARK
GS1010FL
Publication Order Number: GS1010FL
©Bruckewell Technology Corporation Rev. A -2014
GS1010FL
n
Characteristic Curves
Publication Order Number: GS1010FL
©Bruckewell Technology Corporation Rev. A -2014
GS1010FL
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: GS1010FL
©Bruckewell Technology Corporation Rev. A -2014