P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts Features • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package Applications • For Bi-directional use C or CA Suffix • Electrical characteristics apply in both directions Mechanical Data • Case : SMA Molded plastic • Epoxy : UL94V-0 rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed • Polarity : Color band denotes cathode end Graphic symbol • Mounting position : Any • Weight : 0.0.65 gram Packing & Order Information 5,000/Reel MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Symbol Parameter PPK Peak Power Dissipation at Ta = 25ºC, Tp=1ms (Note1) PD Steady State Power Dissipation at TL = 75 °C Value Unit Minimum 400 W 1.0 W 40 A -55 to + 150 °C Peak Forward Surge Current, 8.3ms Single Half IFSM Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps. TJ, TSTG Operating and Storage Temperature Range Publication Order Number: [P4SMA] © Bruckewell Technology Corporation Rev. A -2014 P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts Notes: (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 2 (2) Mounted on copper Lead area at 5.0 mm ( 0.013 mm thick ). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum. ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Working Maximum Maximum Maximum Maximum Breakdown Voltage Peak Reverse Clamping Reverse Temperature @ It ( Note 1 ) Reverse Leakage @ Voltage @ Current Co-efficient Type No. Voltage VRWM IRSM of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P4SMA6.8 6.12 7.48 10 5.50 1000 38.0 10.8 0.057 P4SMA6.8A 6.45 7.14 10 5.80 1000 40.0 10.5 0.057 P4SMA7.5 6.75 8.25 10 6.05 500 36.0 11.7 0.061 P4SMA7.5A 7.13 7.88 10 6.40 500 37.0 11.3 0.061 P4SMA8.2 7.38 9.02 10 6.63 200 33.0 12.5 0.065 P4SMA8.2A 7.79 8.61 10 7.02 200 35.0 12.1 0.065 P4SMA9.1 8.19 10.0 1.0 7.37 50 30.0 13.8 0.068 P4SMA9.1A 8.65 9.55 1.0 7.78 50 31.0 13.4 0.068 P4SMA10 9.00 11.0 1.0 8.10 10 28.0 15.0 0.073 P4SMA10A 9.50 10.5 1.0 8.55 10 29.0 14.5 0.073 P4SMA11 9.90 12.1 1.0 8.92 5.0 26.0 16.2 0.075 P4SMA11A 10.5 11.6 1.0 9.40 5.0 27.0 15.6 0.075 P4SMA12 10.8 13.2 1.0 9.72 5.0 24.0 17.3 0.078 P4SMA12A 11.4 12.6 1.0 10.2 5.0 25.0 16.7 0.078 P4SMA13 11.7 14.3 1.0 10.5 5.0 22.0 19.0 0.081 P4SMA13A 12.4 13.7 1.0 11.1 5.0 23.0 18.2 0.081 P4SMA15 13.5 16.5 1.0 12.1 5.0 19.0 22.0 0.084 P4SMA15A 14.3 15.8 1.0 12.8 5.0 20.0 21.2 0.084 P4SMA16 14.4 17.6 1.0 12.9 5.0 18.0 23.5 0.086 P4SMA16A 15.2 16.8 1.0 13.6 5.0 19.0 22.5 0.086 P4SMA17 15.3 18.7 1.0 13.7 5.0 17.0 25.0 0.087 P4SMA17A 16.2 17.9 1.0 14.5 5.0 18.0 24.0 0.087 P4SMA18 16.2 19.8 1.0 14.5 5.0 16.0 26.5 0.088 P4SMA18A 17.1 18.9 1.0 15.3 5.0 17.0 25.5 0.088 P4SMA20 18.0 22.0 1.0 16.2 5.0 14.0 29.1 0.090 P4SMA20A 19.0 21.0 1.0 17.1 5.0 15.0 27.7 0.090 Publication Order Number: [P4SMA] © Bruckewell Technology Corporation Rev. A -2014 P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Working Maximum Maximum Maximum Maximum Breakdown Voltage Peak Reverse Clamping Reverse Temperature @ It ( Note 1 ) Reverse Leakage @ Voltage @ Current Co-efficient Type No. Voltage VRWM IRSM of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P4SMA22 19.8 24.2 1.0 17.8 5.0 13.0 31.9 0.092 P4SMA22A 20.9 23.1 1.0 18.8 5.0 14.0 30.6 0.092 P4SMA24 21.6 26.4 1.0 19.4 5.0 12.0 34.7 0.094 P4SMA24A 22.8 25.2 1.0 20.5 5.0 13.0 33.2 0.094 P4SMA27 24.3 29.7 1.0 21.8 5.0 11.0 39.1 0.096 P4SMA27A 25.7 28.4 1.0 23.1 5.0 11.2 37.5 0.096 P4SMA30 27.0 33.0 1.0 24.3 5.0 10.0 43.5 0.097 P4SMA30A 28.5 31.5 1.0 25.6 5.0 10.0 41.4 0.097 P4SMA33 29.7 36.6 1.0 26.8 5.0 9.0 47.7 0.098 P4SMA33A 31.4 34.7 1.0 28.2 5.0 9.0 45.7 0.098 P4SMA36 32.4 39.6 1.0 29.1 5.0 8.0 52.0 0.099 P4SMA36A 34.2 37.8 1.0 30.8 5.0 8.4 49.9 0.099 P4SMA39 35.1 42.9 1.0 31.6 5.0 7.4 56.4 0.100 P4SMA39A 37.1 41.0 1.0 33.3 5.0 7.8 53.9 0.100 P4SMA43 38.7 47.3 1.0 34.8 5.0 6.8 61.9 0.101 P4SMA43A 40.9 45.2 1.0 36.8 5.0 7.1 59.3 0.101 P4SMA47 42.3 51.7 1.0 38.1 5.0 6.2 67.8 0.101 P4SMA47A 44.7 49.4 1.0 40.2 5.0 6.5 64.8 0.101 P4SMA51 45.9 56.1 1.0 41.3 5.0 5.7 73.5 0.102 P4SMA51A 48.5 53.6 1.0 43.6 5.0 6.0 70.1 0.102 P4SMA56 50.4 61.6 1.0 45.4 5.0 5.2 80.5 0.103 P4SMA56A 53.2 58.8 1.0 47.8 5.0 5.5 77.0 0.103 P4SMA62 55.8 68.2 1.0 50.2 5.0 4.7 89.0 0.104 P4SMA62A 58.9 65.1 1.0 53.0 5.0 5.0 85.0 0.104 P4SMA68 61.2 74.8 1.0 55.1 5.0 4.3 98.0 0.104 P4SMA68A 64.6 71.4 1.0 58.1 5.0 4.6 92.0 0.104 P4SMA75 67.5 82.5 1.0 60.7 5.0 3.9 108 0.105 P4SMA75A 71.3 78.8 1.0 64.1 5.0 4.1 103 0.105 P4SMA82 73.8 90.2 1.0 66.4 5.0 3.6 118 0.105 Publication Order Number: [P4SMA] © Bruckewell Technology Corporation Rev. A -2014 P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Working Maximum Maximum Maximum Maximum Breakdown Voltage Peak Reverse Clamping Reverse Temperature @ It ( Note 1 ) Reverse Leakage @ Voltage @ Current Co-efficient Type No. Voltage VRWM IRSM of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P4SMA82A 77.9 86.1 1.0 70.1 5.0 3.7 113 0.105 P4SMA91 81.9 100 1.0 73.7 5.0 3.2 131 0.106 P4SMA91A 86.5 95.5 1.0 77.8 5.0 3.4 125 0.106 P4SMA100 90.0 110 1.0 81.0 5.0 2.9 144 0.106 P4SMA100A 95.0 105 1.0 85.5 5.0 3.1 137 0.106 P4SMA110 99.0 121 1.0 89.2 5.0 2.7 158 0.107 P4SMA110A 105 116 1.0 91.0 5.0 2.8 152 0.107 P4SMA120 108 132 1.0 97.2 5.0 2.4 173 0.107 P4SMA120A 114 126 1.0 102 5.0 2.5 165 0.107 P4SMA130 117 143 1.0 105 5.0 2.2 187 0.107 P4SMA130A 124 137 1.0 111 5.0 2.3 179 0.107 P4SMA150 135 165 1.0 121 5.0 2.0 215 0.108 P4SMA150A 143 158 1.0 128 5.0 2.0 207 0.108 P4SMA160 144 176 1.0 130 5.0 1.8 230 0.108 P4SMA160A 152 168 1.0 136 5.0 1.9 219 0.108 P4SMA170 153 187 1.0 138 5.0 1.7 244 0.108 P4SMA170A 162 179 1.0 145 5.0 1.8 234 0.108 P4SMA180 162 198 1.0 146 5.0 1.6 258 0.108 P4SMA180A 171 189 1.0 154 5.0 1.7 246 0.108 P4SMA200 180 220 1.0 162 5.0 1.5 287 0.108 P4SMA200A 190 210 1.0 171 5.0 1.53 274 0.108 P4SMA220 198 242 1.0 175 5.0 1.16 344 0.108 P4SMA220A 209 231 1.0 185 5.0 1.22 328 0.108 P4SMA250 225 275 1.0 202 5.0 1.11 360 0.110 P4SMA250A 237 263 1.0 214 5.0 1.16 344 0.110 P4SMA300 270 330 1.0 243 5.0 0.93 430 0.110 P4SMA300A 285 315 1.0 256 5.0 0.97 414 0.110 P4SMA350 315 385 1.0 284 5.0 0.79 504 0.110 P4SMA350A 332 368 1.0 300 5.0 0.83 482 0.110 Publication Order Number: [P4SMA] © Bruckewell Technology Corporation Rev. A -2014 P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Working Maximum Maximum Maximum Maximum Breakdown Voltage Peak Reverse Clamping Reverse Temperature @ It ( Note 1 ) Reverse Leakage @ Voltage @ Current Co-efficient Type No. Voltage VRWM IRSM of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P4SMA400 360 440 1.0 324 5.0 0.70 574 0.110 P4SMA400A 380 420 1.0 342 5.0 0.73 548 0.110 P4SMA440 396 484 1.0 356 5.0 0.95 631 0.110 P4SMA440A 418 462 1.0 376 5.0 1.00 602 0.110 Note: (1) "P4SMA" will be omitted in marking on the diode. Publication Order Number: [P4SMA] © Bruckewell Technology Corporation Rev. A -2014 P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts ■RATING AND CHARACTERISTIC CURVES ( P4SMA SERIES ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE FIG.5 - PULSE WAVEFORM Publication Order Number: [P4SMA] © Bruckewell Technology Corporation Rev. A -2014 P4SMA Transient Voltage Suppressor VBR : 6.8 - 440 Volts PPK : 400 Watts Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [P4SMA] © Bruckewell Technology Corporation Rev. A -2014