MB22S-210S Surface Mount Schottky Bridge Rectifiers REVERSE VOLTAGE: 20 - 100 V Features • High Temperature Soldering Guaranteed:260 C/10 Second • Saves Space On Printed Circuit Board • RoHS compliant package Mechanical Characteristics • Case: MBS • Epoxy: UL94V-O rate flame retardant • Lead: Lead Formed for Surface Mount Packing & Order Information 50/Tube ; 1,000/Box Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol MB22S MB24S MB26S MB28S MB210S Unit Maximum recurrent peak reverse voltage VRRM 20 40 60 80 100 V Maximum RMS voltage VRMS 14 28 42 56 70 V VDC 20 40 60 80 100 V Maximum DC blocking voltage Maximum average forward rectified Current Total device IF(AV) 2 A IFSM 50 A TJ -55 to +150 °C TSTG -55 to +150 °C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Operating junction temperature range Storage temperature range Publication Order Number: [MB22S-210S] © Bruckewell Technology Corporation Rev. A -2014 MB22S-210S Surface Mount Schottky Bridge Rectifiers REVERSE VOLTAGE: 20 - 100 V Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Maximun instantaneous at IF=1A, Tj=25°C VF 0.45 Value 0.50 Maximum reverse current Tj=25°C at working peak reverse voltage Tj=125°C IR Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance 0.70 Unit 0.85 0.85 V 500 u'A 20 m'A Value Symbol MB22S-210S RθJA 85 Rthjl 28 Unit °C/W NOTE： 1.Pulse test: Pulse width 300us, duty cycle 1% Publication Order Number: [MB22S-210S] © Bruckewell Technology Corporation Rev. A -2014 MB22S-210S Surface Mount Schottky Bridge Rectifiers REVERSE VOLTAGE: 20 - 100 V ■RATING AND CHARACTERISTIC CURVES FIG. 1 FORWARD DERATING CURVE FIG. 2 PEAK FORWARD SURGE CURRENT FIG. 3 TYPICAL FORWARD CHARACTERISTICS FIG. 4 TYPICAL JUNCTION CAPACITANCE Publication Order Number: [MB22S-210S] © Bruckewell Technology Corporation Rev. A -2014 MB22S-210S Surface Mount Schottky Bridge Rectifiers REVERSE VOLTAGE: 20 - 100 V Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [MB22S-210S] © Bruckewell Technology Corporation Rev. A -2014