BAV16W_1N4148W FAST SWITHING DIODES Features • Fast switching speed • Surface mount package ideally suited for automatic insertion • For general purpose switching applications • High conductance • RoHS compliant package Mechanical Data • Case: Molded plastic body • Terminals: Plated leads solderable per MIL-STD-750, Method 2026 • Polarity: Polarity symbols marked on case • Marking:T6, T4 Packing & Order Information 3,000/Reel Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum ratings and electrical characteristics, Single diode @TA=25°C Symbol Parameter Limits Unit 75 V VRRM Peak repetitive peak reverse voltage VRWM Working peak VR DC Blocking voltage VR(RMS) RMS Reverse voltage 53 V IFM Forward continuous current 300 mA IO Average rectified output current 150 mA Peak forward current @=1.0us 2.0 @=1.0s 1.0 IFSM Pd Power dissipation Publication Order Number: [BAV16W_1N4148W] 400 A mW © Bruckewell Technology Corporation Rev. A -2014 BAV16W_1N4148W FAST SWITHING DIODES Maximum ratings and electrical characteristics, Single diode @TA=25°C Symbol Parameter Limits Unit RθJA Thermal resistance junction to ambient 315 K/W Tj Junction temperature 125 °C TSTG Storage temperature -65 to +150 °C VRM Non-Repetitive peak reverse voltage 100 V Electrical ratings @TA=25°C Symbol Parameter Test Conditions VF1 VF2 VF3 Froward voltage VF4 IR1 IR2 Reverse current CT Capacitance between terminals Trr Reverse recovery time Publication Order Number: [BAV16W_1N4148W] Max. Units IF=1.0mA 0.715 V IF=10mA 0.855 V IF=50mA 1.0 V IF=150mA 1.25 V VR=75V 1 uA VR=20V 25 nA VR=0V,f=1.0MHz 2 pF 4 ns IF=IR=10mA Irr=0.1XIR,RL=100Ω Min Typ. © Bruckewell Technology Corporation Rev. A -2014 BAV16W_1N4148W FAST SWITHING DIODES ■RATINGS AND CHARACTERISTIC CURVES BAV16W/1N4148W Publication Order Number: [BAV16W_1N4148W] © Bruckewell Technology Corporation Rev. A -2014 BAV16W_1N4148W FAST SWITHING DIODES Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [BAV16W_1N4148W] © Bruckewell Technology Corporation Rev. A -2014