MSW11N90 900V N-Channel MOSFET Description This latest technology has been especially designed to minimize on-state resistance, have a high rugged avalanche characteristics. These devices are well suited for high efficiency switch mode power supplies. Features • RDS(on) (Max 1.1 Ω )@VGS=10V • Gate Charge (Typical 70nC) • Improved dv/dt Capability, High Ruggedness • 100% Avalanche Tested • Maximum Junction Temperature Range (150˚C) • RoHS compliant package Packing & Order Information 30/Tube ; 540/Box Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (Tc=25°C unless otherwise noted) Symbol Parameter Value Unit VDSS Drain-Source Voltage 900 V VGS Gate-Source Voltage ±30 V Drain Current -Continuous (TC=25°C) 11 A Drain Current -Continuous (TC=100°C) 6.6 A IDM Drain Current Pulsed 44 A EAS Single Pulsed Avalanche Energy 1280 mJ EAR Repetitive Avalanche Energy 30 mJ Power Dissipation (TC = 25 °C) 300 W - Derate above 25°C 2.38 W/°C 4 V/ns ID PD dV/dt Peak Diode Recovery dV/dt Publication Order Number: [MSW11N90] © Bruckewell Technology Corporation Rev. A -2014 MSW11N90 900V N-Channel MOSFET Absolute Maximum Ratings (Tc=25°C unless otherwise noted) Symbol Parameter TJ,TSTG TL Operating and Storage Temperature Range Maximum lead temperature for soldering purposes, 1/8'' from case for 5 seconds Value Unit -55 to +150 °C 300 °C ●Drain current limited by maximum junction temperature Thermal Resistance Characteristics Symbol RθJc Junction-to-Case RθJA Junction-to-Ambient Parameter Max. Units 0.42 °C/W On Characteristics Symbol Test Conditions 40 Min Typ. Max. Units VGS VDS = VGS , ID = 250μA 3.0 -- 5.0 V *RDS(ON) VGS = 10 V , ID = 5.5 A -- 0.9 1.1 Ω Min Typ. Max. Units 900 -- -- V -- 1.0 -- V/°C -- -- 10 μA Off Characteristics Symbol Test Conditions BVDSS VGS = 0 V , ID=250μA △BVDSS /△TJ ID = 250μA, Referenced to 25°C IDSS VDS = 900 V , VGS = 0 V VDS = 720 V , VC = 125°C 100 IGSSF VGS = 30 V , VDS = 0 V -- -- 100 nA IGSSR VGS = -30 V , VDS = 0 V -- -- -100 nA Min Typ. Max. Units -- 70 -- ns Switching Characteristics Symbol Test Conditions td(on) tr VDS = 450 V, ID = 11 A, -- 150 -- ns td(off) RG = 25 Ω -- 150 -- ns -- 90 -- ns -- 70 -- nC -- 15 -- nC -- 30 -- nC -- 3000 -- pF -- 250 -- pF -- 25 -- pF tf Qg Qgs VDS = 720 V,ID = 11 A, VGS = 10 V Qgd CISS COSS VDS = 25 V, VGS = 0 V, F = 1.0MHz CRSS Publication Order Number: [MSW11N90] © Bruckewell Technology Corporation Rev. A -2014 MSW11N90 900V N-Channel MOSFET Source-Drain Diode Characteristics Symbol Parameter Test Conditions Min Typ. Max. IS -- -- 11 ISM -- -- 44 Units A VSD IS = 11 A , VGS = 0 V -- -- 1.4 V trr IS = 11 A , VGS = 0 V -- 1200 -- ns Qrr diF/dt = 100A/μs -- 20 -- μC Notes; 1. Repetitive Rating: Pulse width limited by maximum junction temperature 2. L = 20mH, IAS=11A, VDD=50V, RG=25Ω, Starting TJ=25℃ 3. ISD≦11A, di/dt≦200A/μs,VDD≦BVDSS, Starting TJ=25℃ 4. Pulse Test: Pulse Width ≦ 300μs, Duty Cycle≦ 2% 5. Essentially Independent of Operating Temperature Publication Order Number: [MSW11N90] © Bruckewell Technology Corporation Rev. A -2014 MSW11N90 900V N-Channel MOSFET ■Typical Characteristics FIG.1-ON REGION CHARACTERISTICS FIG.2-TRANSFER CHARACTERISTICS FIG.3-ON RESISTANCE VARIATION VS DRAIN FIG.4-BODY DIODE FORWARD VOLTAGE VARIATION CURRENT AND GATE VOLTAGE WITH SOURCE CURRENT AND TEMPERATURE FIG.5-CAPACITANCE CHARACTERISTICS FIG.6-GATE CHARGE CHARACTERISTICS Publication Order Number: [MSW11N90] © Bruckewell Technology Corporation Rev. A -2014 MSW11N90 900V N-Channel MOSFET ■Typical Characteristics FIG.7-BREAKDOWN VOLTAGE VARIATION VS TEMPERATURE FIG.8-ON-RESISTANCE VARIATION VS TEMPERATURE FIG.9-MAXIMUM SAFE OPERATING AREA FIG.10-MAXIMUM DRAIN CURRENT VS CASE TEMPERATURE FIG.11-TRANSIENT THERMAL RESPONSE CURVE Publication Order Number: [MSW11N90] © Bruckewell Technology Corporation Rev. A -2014 MSW11N90 900V N-Channel MOSFET Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [MSW11N90] © Bruckewell Technology Corporation Rev. A -2014