MB120S Surface Mount Schottky Bridge Rectifiers REVERSE VOLTAGE: 20 - 100 V Features • Low forward voltage (0.76V TYP @ 1.0A) • Low leakage current (0.2μA TYP @ 200V) • High current rating: 1.0A • High voltage rating: 200V • RoHS compliant package Applications • Input rectification for LED lighting • Power over Ethernet (PoE) peripherals • General purpose full wave rectification Mechanical Characteristics • Case: MBS • Epoxy: UL94V-O rate flame retardant • Lead: Lead Formed for Surface Mount Graphic symbol Packing & Order Information 50/Tube ; 1,000/Box MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol MB120S Unit Maximum recurrent peak reverse voltage VRRM 200 V Maximum RMS voltage VRMS 140 V VDC 200 V IF(AV) 1.0 A IFSM 30 A TJ -55 to +150 °C °C TSTG -55 to +150 °C °C Maximum DC blocking voltage Maximum average forward rectified Current Total device Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Operating junction temperature range Storage temperature range Publication Order Number: [MB120S] © Bruckewell Technology Corporation Rev. A -2014 MB120S Surface Mount Schottky Bridge Rectifiers REVERSE VOLTAGE: 20 - 100 V Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Maximun instantaneous at IF=1A, Tj=25°C Maximum reverse current Symbol Typ Max Unit VF 0.75 0.90 V 0.2 50 u'A - 20 m'A Tj=25°C at working peak reverse voltage Tj=125°C IR Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance Value Symbol MB120S RθJA 85 Rthjl 28 Unit °C/W NOTE： (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Publication Order Number: [MB120S] © Bruckewell Technology Corporation Rev. A -2014 MB120S Surface Mount Schottky Bridge Rectifiers REVERSE VOLTAGE: 20 - 100 V Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [MB120S] © Bruckewell Technology Corporation Rev. A -2014