SB510UL - Bruckewell Technology Ltd.

SB510UL
Product profile
Surface Mount High Current Density Schottky
General description
Rectifiers 5.0 Amp 100V
Features
Low forward voltage drop
High current capability
High reliability
High surge current capability
Epitaxial construction
Mechanical data
Case: DO-201AD,
Case: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Lead solderable per MIL-STD-202, method 208
guaranteed
Mounting position: Any
Weight: 1.10 grams(Approximately)
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Symbol
SB510UL
Unit
Maximum repetitive peak reverse voltage
VRRM
100
V
RMS Voltage (Max.)
VRMS
70
V
Working peak reverse voltage
VRWM
100
V
Maximum average forward rectified current
IF(AV)
5.0
A
IFSM
210
A
TJ
-55 to +150
°C
TSTG
-55 to +150
°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Operating junction temperature range
Storage temperature range
Publication Order Number: SB510UL
©Bruckewell Technology Corporation Rev. A -2014
SB510UL
THERMAL CHARACTERISTICS
Parameter
Symbol
Value
Unit
Typical thermal resistance
RθJA
28
°C/W
Notes:
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
Electrical characteristics (Tc=25°C unless otherwise noted)
OFF CHARACTERISTICS
Parameter
Symbol
Value
Unit
Typical
Max
at IF=1A, Tj=25°C
0.40
0.43
at IF=2A, Tj=25°C
0.43
0.46
at IF=5A, Tj=25°C
0.48
0.53
0.61
0.66
at IF=1A, Tj=125°C
0.28
0.31
at IF=2A, Tj=125°C
0.32
0.35
at IF=5A, Tj=125°C
0.46
0.50
at IF=10A, Tj=125°C
0.57
0.62
Instantaneous forward voltage
at IF=10A, Tj=25°C
VF
V
Maximum reverse current
Tj=25°C
at working peak reverse voltage Tj=125°C
IR
20
u'A
5
m'A
DEVICE MARK
SB510UL
Publication Order Number: SB510UL
©Bruckewell Technology Corporation Rev. A -2014
SB510UL
Characteristic Curves
8
Average Power Loss (W)
7
6
5
4
3
2
1
0
0
2
4
6
8
10
Average Forward Current (A)
100.0
100
Instantaneous Reverse Current (mA)
Instantaneous Forward Current (A)
Tj=150°°C
Tj=150°°C
10.0
Tj=125°°C
1.0
Tj=25°°C
0.1
0.000
0.200
0.400
0.600
0.800
10
0.1
Tj=25°°C
0.01
0.001
0.0001
1.000
20
Instantaneous Forward Voltage (V)
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage (%)
Figure 4. Typical Reverse Characteristics
Figure 3. Typical Instantaneous Forward Characteristics Per Leg
100
Transient Thermal Impedance
(°C/W)
10,000
Junction Capacitance (pF)
Tj=125°°C
1
1,000
100
10
0.1
1
10
Reverse Voltage (V)
Figure 5. Typical Junction Capacitance
Publication Order Number: SB510UL
100
10
1
0.01
0.1
1
10
100
t, Pulse Duration, (sec.)
Figure 6. Typical Transient Thermal Impedance
©Bruckewell Technology Corporation Rev. A -2014
SB510UL
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: SB510UL
©Bruckewell Technology Corporation Rev. A -2014