Broadband Frequencies 25-300 MHz (43 material) - Fair

Fair-Rite Product's Catalog
Part Data Sheet, 2743001112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Application:
Suppression Components
Where Used:
Board Component
Part Type:
Beads-on-Leads
Fair-Rite Product's Catalog
Part Data Sheet, 2743001112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Frequency Range: Broadband Frequencies 25-300 MHz (43 material)
Application:
Suppression Components
Where Used:
Board Component
Part Type:
Beads-on-Leads
Part Type Information
Ferrite suppression beads are supplied assembled on tinned copper wire for automated circuit board assembly.
-Parts with a '2' as the last digit of the part number are supplied taped and reeled per IEC 60286-1 and EIA
RS-296-F standards. Taped and reeled parts are supplied 4500 pieces on a 14'' reel. Taping details: Component
pitch 5 mm. Inside tape spacing 52.5 mm. Tape width 6 mm.
-Beads-on-leads can be supplied bulk packed. The last digit of bulk packed parts is a '1'.
-Wires are oxygen free high conductivity copper with 100% matte tin plating over a nickel undercoating. The
resistance of the wire is 3.5 mOhm for the 22 AWG and 2.2 mOhm for the 20 AWG wire.
-Beads-on-leads are controlled for impedances only. Minimum impedance values are specified for the + marked
frequencies. The minimum impedance is typically the listed impedance less 20%. The impedances of the 73 & 43
beads-on-leads are measured on the 4193A Vector Impedance Analyzer. The 61 beads-on-leads are tested for impedance
on the 4291A RF Impedance Analyzer.
-For any bead-on lead requirement not listed here, feel free
to contact our customer service group for availability and pricing.
-Our 'Bead-on-Lead Suppression Kit' (part number 0199000028) is available for prototype evaluation.
-Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 1 = bulk packed,
2 = taped and reeled.
Fair-Rite Product's Catalog
Part Data Sheet, 2743001112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743001112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.400
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
4.45
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.25
-
0.138
2.440
0.175
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
31
25 MHz+
49
100 MHz+
68
250 MHz
65
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743001112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743001111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743001111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.400
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
4.45
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.25
-
0.138
2.440
0.175
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
31
25 MHz+
49
100 MHz+
68
250 MHz
65
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743001111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743015112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743015112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.400
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
5.25
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.25
-
0.138
2.440
0.206
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
36
25 MHz+
54
100 MHz+
82
250 MHz
78
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743015112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743015111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743015111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.400
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
5.25
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.25
-
0.138
2.440
0.206
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
36
25 MHz+
54
100 MHz+
82
250 MHz
78
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743015111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743005112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743005112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.400
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
6.00
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.25
-
0.138
0.244
0.236
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
40
25 MHz+
60
100 MHz+
91
250 MHz
90
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743005112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743005111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743005111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.400
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
6.00
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.25
-
0.138
0.244
0.236
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
40
25 MHz+
60
100 MHz+
91
250 MHz
90
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743005111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743003112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743003112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.500
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
6.70
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.25
-
0.138
0.244
0.263
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
44
25 MHz+
65
100 MHz+
100
250 MHz
101
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743003112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743003111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743003111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.500
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
6.70
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.25
-
0.138
0.244
0.263
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
44
25 MHz+
65
100 MHz+
100
250 MHz
101
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743003111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743004112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743004112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.500
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
7.60
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.30
-
0.138
2.440
0.300
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
50
25 MHz+
75
100 MHz+
110
250 MHz
115
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743004112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743004111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743004111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.500
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
7.60
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.30
-
0.138
2.440
0.300
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
50
25 MHz+
75
100 MHz+
110
250 MHz
115
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743004111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743002112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743002112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.600
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
8.90
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.30
-
0.138
2.440
0.350
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
57
25 MHz+
88
100 MHz+
133
250 MHz
134
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743002112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743002111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743002111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.600
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
8.90
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.30
-
0.138
2.440
0.350
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
57
25 MHz+
88
100 MHz+
133
250 MHz
134
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743002111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743007112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743007112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.600
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
9.50
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.30
-
0.138
2.440
0.374
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
61
25 MHz+
96
100 MHz+
150
250 MHz
143
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743007112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743007111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743007111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.600
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
9.50
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.30
-
0.138
2.440
0.374
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
61
25 MHz+
96
100 MHz+
150
250 MHz
143
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743007111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743008112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743008112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.700
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
11.40
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.40
-
0.138
2.440
0.450
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
72
25 MHz+
116
100 MHz+
180
250 MHz
168
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743008112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743008111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743008111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.700
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
11.40
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.40
-
0.138
2.440
0.450
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
72
25 MHz+
116
100 MHz+
180
250 MHz
168
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743008111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743009112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743009112
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.700
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
13.80
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.50
-
0.138
2.440
0.545
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
86
25 MHz+
143
100 MHz+
220
250 MHz
196
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
6
5
-
-
4500
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743009112
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743009111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743009111
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
.700
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
3.50
62.00
13.80
0.65
-
mm
nominal inch
tol
inch
misc.
±0.25
±1.50
±0.50
-
0.138
2.440
0.545
-
22 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
86
25 MHz+
143
100 MHz+
220
250 MHz
196
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743009111
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743012201
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743012201
Description:
43 BEAD ON LEAD
Weight:
4.500
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
9.80
62.00
11.40
0.80
-
mm
nominal inch
tol
inch
misc.
±0.30
±1.50
±0.40
-
0.385
2.440
0.449
-
20 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
121
25 MHz+
193
100 MHz+
271
250 MHz
253
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743012201
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743013211
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743013211
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
5.500
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
9.80
62.00
14.00
0.80
-
mm
nominal inch
tol
inch
misc.
±0.30
±1.50
±0.50
-
0.385
2.440
0.550
-
20 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
147
25 MHz+
235
100 MHz+
331
250 MHz
281
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743013211
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743014221
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Part Number:
2743014221
Description:
43 BEAD ON LEAD
Preferred Part:
Weight:
6.500
(g)
Mechanical Specifications
Land Patterns
V
Dim
A
B
C
D
E
F
G
H
J
K
mm
9.80
62.00
16.50
0.80
-
mm
nominal inch
tol
inch
misc.
±0.30
±1.50
±0.50
-
0.385
2.440
0.650
-
20 AWG
-
Electrical Specifications
Typical Impedance ( )
10 MHz
173
25 MHz+
280
100 MHz+
391
250 MHz
296
Electrical Properties
W
X
Y
Z
-
-
-
ref
-
-
Winding Information
Turns
Wire
1st Wire
2nd Wire
Tested
Size
Length
Length
-
-
-
-
Reel Information
Tape Width Pitch
Parts 7 ''
Parts 13 '' Parts 14 ''
mm
mm
Reel
Reel
Reel
-
-
-
-
-
Package Size
Pkg Size
(-)
Connector Plate
# Holes
# Rows
-
-
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant
Ae : Effective Cross-Sectional Area
L
AL - Inductance Factor (__
N 2)
N/AWG - Number of Turns/Wire Size for Test Coil
l e : Effective Path Length
Ve : Effective Core Volume
Nl - Value of dc Ampere-turns
Fair-Rite Product's Catalog
Part Data Sheet, 2743014221
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com