Fair-Rite Product's Catalog Part Data Sheet, 6678211621 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Application: Inductive Components Where Used: Closed Magnetic Circuit Part Type: PQ Cores Fair-Rite Product's Catalog Part Data Sheet, 6678211621 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Frequency Range: Dimensions Application: Inductive Components Where Used: Closed Magnetic Circuit Part Type: PQ Cores Part Type Information PQ20/16, PQ20/20, PQ26/20, PQ26/25, PQ32/20, PQ32/30, PQ35/35, PQ40/40, PQ50/50 PQ cores were developed for use in power applications. The large surface area to volume of the core aids in heat dissipation. PQ cores are employed both in filter and transformer designs for switch mode power supplies. -PQ cores can be supplied with the centerpost gapped to a mechanical dimension or an AL value. -AL value is measured at 1 kHz, B < 10 gauss. -Weight indicated is per pair or set. Fair-Rite Product's Catalog Part Data Sheet, 6678211621 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678211621 Description: 78 PQ CORE Weight: 13.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 20.50 8.00 14.00 5.00 18.00 8.80 12.00 - PQ20/16 mm nominal inch tol inch misc. ± 0.4 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.2 min - 0.807 0.315 0.551 0.197 0.709 0.346 0.472 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 3430 ±25% Ae(cm2 ) 0.61500 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 6.00 # Holes # Rows 3.69 - - Ve (cm ) 2.27000 Amin (cm2) .601 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698211621 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698211621 Description: 98 PQ CORE Weight: 13.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 20.50 8.00 14.00 5.00 18.00 8.80 12.00 - PQ20/16 mm nominal inch tol inch misc. ± 0.4 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.2 min - 0.807 0.315 0.551 0.197 0.709 0.346 0.472 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 3430 ±25% Ae(cm2 ) 0.61500 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 6.00 # Holes # Rows 3.69 - - Ve (cm ) 2.27000 Amin (cm2) .601 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695211621 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695211621 Description: 95 PQ CORE Weight: 13.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 20.50 8.00 14.00 5.00 18.00 8.80 12.00 - PQ20/16 mm nominal inch tol inch misc. ± 0.4 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.2 min - 0.807 0.315 0.551 0.197 0.709 0.346 0.472 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 3880 ±25% Ae(cm2 ) 0.61500 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 6.00 # Holes # Rows 3.69 - - Ve (cm ) 2.27000 Amin (cm2) .601 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6678212021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678212021 Description: 78 PQ CORE Weight: 16.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 20.50 10.20 14.00 7.00 18.00 8.80 12.00 - PQ20/20 mm nominal inch tol inch misc. ± 0.4 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.2 min - 0.807 0.402 0.551 0.276 0.709 0.346 0.472 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 2920 ±25% Ae(cm2 ) 0.62500 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 7.20 # Holes # Rows 4.52 - - Ve (cm ) 2.52600 Amin (cm2) .608 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698212021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698212021 Description: 98 PQ CORE Weight: 16.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 20.50 10.20 14.00 7.00 18.00 8.80 12.00 - PQ20/20 mm nominal inch tol inch misc. ± 0.4 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.2 min - 0.807 0.402 0.551 0.276 0.709 0.346 0.472 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 2920 ±25% Ae(cm2 ) 0.62500 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 7.20 # Holes # Rows 4.52 - - Ve (cm ) 2.52600 Amin (cm2) .608 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695212021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695212021 Description: 95 PQ CORE Weight: 16.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 20.50 10.20 14.00 7.00 18.00 8.80 12.00 - PQ20/20 mm nominal inch tol inch misc. ± 0.4 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.2 min - 0.807 0.402 0.551 0.276 0.709 0.346 0.472 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 3500 ±25% Ae(cm2 ) 0.62500 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 7.20 # Holes # Rows 4.52 - - Ve (cm ) 2.52600 Amin (cm2) .608 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6678272021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678272021 Description: 78 PQ CORE Weight: 30.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 26.50 10.10 19.00 5.75 22.50 12.00 15.50 - PQ26/20 mm nominal inch tol inch misc. ± 0.5 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.3 min - 1.043 0.398 0.748 0.226 0.886 0.472 0.610 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 5510 ±25% Ae(cm2 ) 1.20300 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.72 # Holes # Rows 4.48 - - Ve (cm ) 5.38500 Amin (cm2) 1.131 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698272021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698272021 Description: 98 PQ CORE Weight: 30.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 26.50 10.10 19.00 5.75 22.50 12.00 15.50 - PQ26/20 mm nominal inch tol inch misc. ± 0.5 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.3 min - 1.043 0.398 0.748 0.226 0.886 0.472 0.610 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 5510 ±25% Ae(cm2 ) 1.20300 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.72 # Holes # Rows 4.48 - - Ve (cm ) 5.38500 Amin (cm2) 1.131 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695272021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695272021 Description: 95 PQ CORE Weight: 30.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 26.50 10.10 19.00 5.75 22.50 12.00 15.50 - PQ26/20 mm nominal inch tol inch misc. ± 0.5 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.3 min - 1.043 0.398 0.748 0.226 0.886 0.472 0.610 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6500 ±25% Ae(cm2 ) 1.20300 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.72 # Holes # Rows 4.48 - - Ve (cm ) 5.38500 Amin (cm2) 1.131 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6678272521 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678272521 Description: 78 PQ CORE Weight: 36.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 26.50 12.50 19.00 8.05 22.50 12.00 15.50 - PQ26/25 mm nominal inch tol inch misc. ± 0.5 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.3 min - 1.043 0.492 0.748 0.317 0.886 0.472 0.610 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 4670 ±25% Ae(cm2 ) 1.17700 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.59 # Holes # Rows 5.40 - - Ve (cm ) 6.35900 Amin (cm2) 1.131 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698272521 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698272521 Description: 98 PQ CORE Weight: 36.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 26.50 12.50 19.00 8.05 22.50 12.00 15.50 - PQ26/25 mm nominal inch tol inch misc. ± 0.5 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.3 min - 1.043 0.492 0.748 0.317 0.886 0.472 0.610 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 4670 ±25% Ae(cm2 ) 1.17700 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.59 # Holes # Rows 5.40 - - Ve (cm ) 6.35900 Amin (cm2) 1.131 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695272521 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695272521 Description: 95 PQ CORE Weight: 36.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 26.50 12.50 19.00 8.05 22.50 12.00 15.50 - PQ26/25 mm nominal inch tol inch misc. ± 0.5 ± 0.15 ± 0.4 ± 0.15 ± 0.4 ± 0.3 min - 1.043 0.492 0.748 0.317 0.886 0.472 0.610 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6000 ±25% Ae(cm2 ) 1.17700 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.59 # Holes # Rows 5.40 - - Ve (cm ) 6.35900 Amin (cm2) 1.131 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6678322121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678322121 Description: 78 PQ CORE Weight: 43.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 32.00 10.25 22.00 5.75 27.50 13.45 19.00 - PQ32/20 mm nominal inch tol inch misc. ± 0.6 ± 0.15 ± 0.4 ± 0.15 ± 0.5 ± 0.3 min - 1.260 0.404 0.866 0.226 1.083 0.530 0.748 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6000 ±25% Ae(cm2 ) 1.64200 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.27 # Holes # Rows 5.37 - - Ve (cm ) 8.82100 Amin (cm2) 1.404 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698322121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698322121 Description: 98 PQ CORE Weight: 43.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 32.00 10.25 22.00 5.75 27.50 13.45 19.00 - PQ32/20 mm nominal inch tol inch misc. ± 0.6 ± 0.15 ± 0.4 ± 0.15 ± 0.5 ± 0.3 min - 1.260 0.404 0.866 0.226 1.083 0.530 0.748 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6000 ±25% Ae(cm2 ) 1.64200 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.27 # Holes # Rows 5.37 - - Ve (cm ) 8.82100 Amin (cm2) 1.404 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695322121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695322121 Description: 95 PQ CORE Weight: 43.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 32.00 10.25 22.00 5.75 27.50 13.45 19.00 - PQ32/20 mm nominal inch tol inch misc. ± 0.6 ± 0.15 ± 0.4 ± 0.15 ± 0.5 ± 0.3 min - 1.260 0.404 0.866 0.226 1.083 0.530 0.748 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 7900 ±25% Ae(cm2 ) 1.64200 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.27 # Holes # Rows 5.37 - - Ve (cm ) 8.82100 Amin (cm2) 1.404 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6678323121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678323121 Description: 78 PQ CORE Weight: 57.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 32.00 15.15 22.00 10.65 27.50 13.45 19.00 - PQ32/30 mm nominal inch tol inch misc. ± 0.6 ± 0.15 ± 0.4 ± 0.15 ± 0.5 ± 0.3 min - 1.260 0.596 0.866 0.419 1.083 0.530 0.748 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 4500 ±25% Ae(cm2 ) 1.64200 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.59 # Holes # Rows 7.53 - - Ve (cm ) 12.37000 Amin (cm2) 1.401 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698323121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698323121 Description: 98 PQ CORE Weight: 57.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 32.00 15.15 22.00 10.65 27.50 13.45 19.00 - PQ32/30 mm nominal inch tol inch misc. ± 0.6 ± 0.15 ± 0.4 ± 0.15 ± 0.5 ± 0.3 min - 1.260 0.596 0.866 0.419 1.083 0.530 0.748 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 4500 ±25% Ae(cm2 ) 1.64200 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.59 # Holes # Rows 7.53 - - Ve (cm ) 12.37000 Amin (cm2) 1.401 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695323121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695323121 Description: 95 PQ CORE Weight: 57.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 32.00 15.15 22.00 10.65 27.50 13.45 19.00 - PQ32/30 mm nominal inch tol inch misc. ± 0.6 ± 0.15 ± 0.4 ± 0.15 ± 0.5 ± 0.3 min - 1.260 0.596 0.866 0.419 1.083 0.530 0.748 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6500 ±25% Ae(cm2 ) 1.64200 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.59 # Holes # Rows 7.53 - - Ve (cm ) 12.37000 Amin (cm2) 1.401 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6678353621 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678353621 Description: 78 PQ CORE Weight: 73.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 35.10 17.40 26.00 12.50 32.00 14.35 23.50 - PQ35/35 mm nominal inch tol inch misc. ± 0.6 ± 0.2 ± 0.5 ± 0.2 ± 0.5 ± 0.25 min - 1.382 0.685 1.024 0.492 1.260 0.565 0.925 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 4900 ±25% Ae(cm2 ) 1.83000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.82 # Holes # Rows 8.82 - - Ve (cm ) 16.13000 Amin (cm2) 1.617 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698353621 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698353621 Description: 98 PQ CORE Weight: 73.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 35.10 17.40 26.00 12.50 32.00 14.35 23.50 - PQ35/35 mm nominal inch tol inch misc. ± 0.6 ± 0.2 ± 0.5 ± 0.2 ± 0.5 ± 0.25 min - 1.382 0.685 1.024 0.492 1.260 0.565 0.925 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 5100 ±25% Ae(cm2 ) 1.83000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.82 # Holes # Rows 8.82 - - Ve (cm ) 16.13000 Amin (cm2) 1.617 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695353621 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695353621 Description: 95 PQ CORE Weight: 73.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 35.10 17.40 26.00 12.50 32.00 14.35 23.50 - PQ35/35 mm nominal inch tol inch misc. ± 0.6 ± 0.2 ± 0.5 ± 0.2 ± 0.5 ± 0.25 min - 1.382 0.685 1.024 0.492 1.260 0.565 0.925 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6200 ±25% Ae(cm2 ) 1.83000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 4.82 # Holes # Rows 8.82 - - Ve (cm ) 16.13000 Amin (cm2) 1.617 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6678404121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678404121 Description: 78 PQ CORE Weight: 97.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 40.50 19.88 27.93 14.75 36.40 14.70 27.20 - PQ40/40 mm nominal inch tol inch misc. ± 0.9 ± 0.13 ± 0.53 ± 0.15 min ± 0.30 min - 1.594 0.783 1.100 0.581 1.433 0.579 1.071 - min min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 4300 ±25% Ae(cm2 ) 1.98000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 5.23 # Holes # Rows 10.36 - - Ve (cm ) 20.50000 Amin (cm2) 1.700 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698404121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698404121 Description: 98 PQ CORE Weight: 97.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 40.50 19.88 27.93 14.75 36.40 14.70 27.20 - PQ40/40 mm nominal inch tol inch misc. ± 0.9 ± 0.13 ± 0.53 ± 0.15 min ± 0.30 min - 1.594 0.783 1.100 0.581 1.433 0.579 1.071 - min min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 4300 ±25% Ae(cm2 ) 1.98000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 5.23 # Holes # Rows 10.36 - - Ve (cm ) 20.50000 Amin (cm2) 1.700 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695404121 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695404121 Description: 95 PQ CORE Weight: 97.000 (g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 40.50 19.88 27.93 14.75 36.40 14.70 27.20 - PQ40/40 mm nominal inch tol inch misc. ± 0.9 ± 0.13 ± 0.53 ± 0.15 min ± 0.30 min - 1.594 0.783 1.100 0.581 1.433 0.579 1.071 - min min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 5850 ±25% Ae(cm2 ) 1.98000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 5.23 # Holes # Rows 10.36 - - Ve (cm ) 20.50000 Amin (cm2) 1.700 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6678505021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6678505021 Description: 78 PQ CORE Weight: 195.000(g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 50.00 25.00 32.00 18.10 44.00 20.00 32.00 - PQ50/50 mm nominal inch tol inch misc. ± 0.8 ± 0.15 ± 0.6 ± 0.25 ± 0.7 ± 0.4 min - 1.969 0.984 1.260 0.713 1.732 0.787 1.260 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6720 ±25% Ae(cm2 ) 3.19000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.59 # Holes # Rows 11.47 - - Ve (cm ) 36.63000 Amin (cm2) 3.142 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6698505021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6698505021 Description: 98 PQ CORE Weight: 195.000(g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 50.00 25.00 32.00 18.10 44.00 20.00 32.00 - PQ50/50 mm nominal inch tol inch misc. ± 0.8 ± 0.15 ± 0.6 ± 0.25 ± 0.7 ± 0.4 min - 1.969 0.984 1.260 0.713 1.732 0.787 1.260 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6720 ±25% Ae(cm2 ) 3.19000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.59 # Holes # Rows 11.47 - - Ve (cm ) 36.63000 Amin (cm2) 3.142 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 6695505021 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 6695505021 Description: 95 PQ CORE Weight: 195.000(g) per Set Generic Name: Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 50.00 25.00 32.00 18.10 44.00 20.00 32.00 - PQ50/50 mm nominal inch tol inch misc. ± 0.8 ± 0.15 ± 0.6 ± 0.25 ± 0.7 ± 0.4 min - 1.969 0.984 1.260 0.713 1.732 0.787 1.260 - min - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 8000 ±25% Ae(cm2 ) 3.19000 -1 l/A(cm ) l e (cm) 3 (-) Connector Plate 3.59 # Holes # Rows 11.47 - - Ve (cm ) 36.63000 Amin (cm2) 3.142 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns