Fair-Rite Product's Catalog Part Data Sheet, 5967000101 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Application: Inductive Components Where Used: Closed Magnetic Circuit Part Type: Toroids Fair-Rite Product's Catalog Part Data Sheet, 5967000101 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Frequency Range: Low Permeability, 67 (ui=40) material Application: Inductive Components Where Used: Closed Magnetic Circuit Part Type: Toroids Part Type Information A ring configuration provides the ultimate utilization of the intrinsic ferrite material properties. Toroidal cores are used in a wide variety of applications such as power input filters, ground-fault interrupters, common-mode filters and in pulse and broadband transformers. -Toroids are listed by initial permeability classes and increasing dimension of the inside diameter. -All toroidal cores are supplied burnished to break sharp edges. -Toroids are tested for AL values at 10 kHz. -Toroids with an outside diameter of 9.5mm (.375'') or smaller can be supplied Parylene C coated. The Parylene coating will increase the 'A' and 'C' dimensions and decrease the 'B' dimension a maximum of 0.038mm (.0015''). The ninth digit of a Parylene coated toroid part number is a '1'. See the material characteristics of Parylene C in our online catalog. -Toroids with an outside diameter of 9.5mm (.375'') or larger can be supplied with a uniform coating of thermo-set plastic coating. This coating will increase the 'A' and 'C' dimensions and decrease the 'B' dimension a maximum of 0.5mm (.020''). The 9th digit of the thermo-set plastic coated toroid part number is a '2'. Thermo-set plastic coating is RoHS compliant. -Thermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the 'C' dimension of the toroid. -The ''C'' dimension may be modified to suit specific applications. -For any toroidal core requirement not listed in the catalog, please contact our customer service department for availability and pricing. -Explaination of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, 9th digit 1 = Parylene coating, 2 = thermo-set plastic coating. Fair-Rite Product's Catalog Part Data Sheet, 5967000101 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967000101 Description: 67 TOROID Preferred Part: Weight: .140 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 5.95 3.05 1.65 - mm nominal inch tol inch misc. -0.25 ±0.10 -0.25 - 0.230 0.120 0.060 - - Electrical Specifications Typical Impedance ( ) W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 6 Min Ae(cm2 ) 0.02000 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 63.80 # Holes # Rows 1.30 - - 0.02700 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967000201 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967000201 Description: 67 TOROID Preferred Part: Weight: .830 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 9.50 4.75 3.30 - mm nominal inch tol inch misc. ±0.20 ±0.15 -0.25 - 0.375 0.187 0.125 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 18 +35%, -25% Ae(cm2 ) 0.07200 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 28.60 # Holes # Rows 2.07 - - 0.15000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967000301 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967000301 Description: 67 TOROID Preferred Part: Weight: 2.000 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 12.70 7.15 4.90 - mm nominal inch tol inch misc. ±0.25 ±0.20 -0.25 - 0.500 0.281 0.188 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 22 +35%, -25% Ae(cm2 ) 0.12900 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 22.90 # Holes # Rows 2.95 - - 0.38000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967001101 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967001101 Description: 67 TOROID Preferred Part: Weight: 2.400 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 12.70 7.90 6.35 - mm nominal inch tol inch misc. ±0.25 ±0.20 ±0.25 - 0.500 0.312 0.250 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 24 +35%, -25% Ae(cm2 ) 0.15000 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 20.80 # Holes # Rows 3.12 - - 0.47000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967001901 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967001901 Description: 67 TOROID Preferred Part: Weight: 4.700 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 12.70 7.90 12.70 - mm nominal inch tol inch misc. ±0.25 ±0.20 ±0.35 - 0.500 0.312 0.500 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 48 +35%, -25% Ae(cm2 ) 0.29900 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 10.40 # Holes # Rows 3.12 - - 0.93000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967000601 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967000601 Description: 67 TOROID Preferred Part: Weight: 6.400 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 21.00 13.20 6.35 - mm nominal inch tol inch misc. ±0.35 ±0.30 ±0.25 - 0.825 0.520 0.250 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 24 +35%, -25% Ae(cm2 ) 0.24300 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 21.30 # Holes # Rows 5.20 - - 1.26000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967001801 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967001801 Description: 67 TOROID Preferred Part: Weight: 7.200 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 22.10 13.70 6.35 - mm nominal inch tol inch misc. ±0.40 ±0.30 ±0.25 - 0.870 0.540 0.250 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 24 +35%, -25% Ae(cm2 ) 0.26200 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 20.70 # Holes # Rows 5.40 - - 1.42000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967001001 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967001001 Description: 67 TOROID Preferred Part: Weight: 13.000 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 29.00 19.00 7.50 - mm nominal inch tol inch misc. ±0.65 ±0.50 ±0.25 - 1.142 0.748 0.295 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 25 +35%, -25% Ae(cm2 ) 0.37000 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 19.80 # Holes # Rows 7.30 - - 2.70000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967001201 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967001201 Description: 67 TOROID Preferred Part: Weight: 26.000 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 29.00 19.00 13.85 - mm nominal inch tol inch misc. ±0.65 ±0.50 ±0.30 - 1.142 0.748 0.545 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 47 +35%, -25% Ae(cm2 ) 0.68000 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 10.70 # Holes # Rows 7.30 - - 5.00000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967001701 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967001701 Description: 67 TOROID Preferred Part: Weight: 23.000 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 31.75 19.05 9.50 - mm nominal inch tol inch misc. ±0.75 ±0.50 ±0.30 - 1.250 0.750 0.375 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 39 +35%, -25% Ae(cm2 ) 0.59000 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 12.90 # Holes # Rows 7.60 - - 4.50000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967002701 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967002701 Description: 67 TOROID Preferred Part: Weight: 33.000 (g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 35.55 23.00 12.70 - mm nominal inch tol inch misc. ±0.75 ±0.55 ±0.50 - 1.400 0.900 0.500 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 45 +35%, -25% Ae(cm2 ) 0.79000 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 11.20 # Holes # Rows 8.90 - - 7.00000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns Fair-Rite Product's Catalog Part Data Sheet, 5967003801 Printed: 2013-07-03 Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) 324-7748 www.fair-rite.com Part Number: 5967003801 Description: 67 TOROID Preferred Part: Weight: 106.000(g) Mechanical Specifications Land Patterns V Dim mm A B C D E F G H J K 61.00 35.55 12.70 - mm nominal inch tol inch misc. ±1.30 ±0.85 ±0.50 - 2.400 1.400 0.500 - - W X Y Z - - - ref - - Winding Information Turns Wire 1st Wire 2nd Wire Tested Size Length Length - - - - Reel Information Electrical Specifications Typical Impedance ( ) Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 '' mm mm Reel Reel Reel - - - - - Package Size Pkg Size Electrical Properties AL (nH) 55 +35%, -25% Ae(cm2 ) 1.58000 -1 l/A(cm ) l e (cm) 3 Ve (cm ) (-) Connector Plate 9.20 # Holes # Rows 14.50 - - 22.80000 Legend + Test frequency Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available. The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression. A ½ turn is defined as a single pass through a hole. l/A - Core Constant Ae : Effective Cross-Sectional Area L AL - Inductance Factor (__ N 2) N/AWG - Number of Turns/Wire Size for Test Coil l e : Effective Path Length Ve : Effective Core Volume Nl - Value of dc Ampere-turns