C3D03060A VRRM = Silicon Carbide Schottky Diode IF (TC=135˚C) = 5.5 A Z-Rec™ Rectifier Qc Features • • • • • • • • 600 V = 6.7 nC Package 600-Volt Schottky Rectifier Optimized for PFC Boost Diode Application Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-220-2 Benefits • • • • • Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 Applications • • CASE PIN 2 Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 300W-450W Part Number Package Marking C3D03060A TO-220-2 C3D03060 Maximum Ratings (TC = 25 ˚C unless otherwise specified) Symbol Parameter Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V Continuous Forward Current 11.5 5.5 A TC=25˚C TC=135˚C TC=160˚C 18 13.5 A TC=25˚C, tP=10 mS, Half Sine Wave D=0.3 TC=110˚C, tP=10 mS, Half Sine Wave D=0.3 IF 3 IFRM Repetitive Peak Forward Surge Current IFSM Non-Repetitive Peak Forward Surge Current 26 23 A TC=25˚C, tP=10 mS, Half Sine Wave D=0.3 TC=110˚C, tP=10 mS, Half Sine Wave D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 100 A TC=25˚C, tP=10 µS, Pulse Ptot Power Dissipation 53 23 W TC=25˚C TC=110˚C -55 to +175 ˚C 1 8.8 Nm lbf-in TJ , Tstg Operating Junction and Storage Temperature TO-220 Mounting Torque 1 Value C3D03060A Rev. D M3 Screw 6-32 Screw Note Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.5 1.8 1.7 2.4 V IF = 3 A TJ=25°C IF = 3 A TJ=175°C IR Reverse Current 10 20 50 100 μA VR = 600 V TJ=25°C VR = 600 V TJ=175°C QC Total Capacitive Charge 6.7 nC VR = 600 V, IF = 3A di/dt = 500 A/μS TJ = 25°C C Total Capacitance 155 13 12 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz Note Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RθJC Parameter TO-220 Package Thermal Resistance from Junction to Case Typ. Unit 2.8 °C/W Typical Performance 14 1.4E-05 6.06.0 Reverse Current (A) 12 1.2E-05 4.04.0 Forward Current IF Forward Current (A) 25°C 75°C 125°C 175°C 3.03.0 2.02.0 TJ = 25°C TJ = 75°C 2.0E-062 TJ = 175° 8.0E-068 Current 25C Current 25C Current 75C 6.0E-066 Current 125C Current 125 Current 175C 4.0E-064 1.01.0 00.0 0.0 0.0 Current 75C TJ = 125°C 0.0E+000 0.5 0.5 1.0 1.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 VF Forward Voltage (V) Forward Voltage Figure 1. Forward Characteristics 2 1.0E-05 10 IR Reverse Current (μA) TJ = TJ = TJ = TJ = 5.05.0 C3D03060A Rev. D 00 100 200 300 400 500 600 700 800 100 200 300 400 500 600 700 800 VR Reverse Voltage (V) Reverse Bias (V) Figure 2. Reverse Characteristics Current 175 Capacitance Typical Performance C3D03060A Current Derating 30 30 80 80 70 70 60 60 20 20 20% 30% 50% 70% DC 15 15 Duty* Duty* Duty* Duty* 10 10 C Capacitance (pF) Capacitance (pF) (A) Current Forward Peak IF(PEAK) IF(PEAK) Peak Forward Current (A) 25 25 5 5 0 0 25 25 50 50 40 40 30 30 20 20 10 10 0 0 50 75 100 125 150 175 50 75 100 125 150 175 1 1 Case Temperature (°°( C)°C) TC CaseTCTemperature * Frequency > 1KHz 10 100 10 100 V Reverse Voltage (V) R Reverse Voltage Figure 3. Current Derating Zth (°C/W) Figure 4. Capacitance vs. Reverse Voltage Time (s) Figure 5. Transient Thermal Impedance 3 C3D03060A Rev. D 1000 1000 Typical Performance 70.0 70 Power Dissipation (W) Power Dissipation (W) 60 60.0 50 50.0 40 40.0 30 30.0 20 20.0 10 10.0 0 0.0 25 50 75 100 125 150 175 25 50 75 100 125 150 175 Case Temperature TC CaseTcTemperature (°(°C) C) Figure 6. Power Derating Package Dimensions Package TO-220-2 POS A B A C P F J B D X S E Y 1 2 G T Z U H V L M W N PIN 1 CASE PIN 2 Millimeters Max Min Max .381 .410 9.677 10.414 DA .235 Inc hes .100 M in M ax .395.223 .410 .255 5.969 M illim eters .120 2.540 M in M ax .337 5.664 10.033 10.414 EB .235.590 .255 .615 5.969 FC D G E H F J G .102.143 .112 2.591 .153 .337 .337 8.560 1.105 1.147 .590 .610 14.986 .500 .550 .149 .153 3.785 R1.147 0.197 28.626 1.127 LH MJ L N M PN .530.025 .550 R 0.010 .045 .028 .036 .195 .045 .055 .195.165 .205 13.462 13.970 .036 .635 R 0.254 .055 1.143 .711 .914 .205 4.953 1.143 1.397 .185 4.191 4.953 5.207 QP .170.048 .180 .054 4.318 1.219 4.572 1.372 SQ S T T U U VV .048 3° .054 1.371 3° 5° 3° 5° 3° 5° 2.388 2.794 6° 3° 5° .100.094 .110 1.219 6° 3° 6° 3° 6° 3° .110 2.54 WW XX .014.014 .021 3° 3° 5° .356 .025 3° 5.5° .533 .356 5°3° C P OS Q Inches Min Y z Y Z 3° 3° 3° 3° 5° 5° .395 .410 .385 .130 .150 .130 10.033 .410 3.302 .150 14.986 6.477 6.477 3.048 8.560 15.621 2.845 3.632 3.886 8.560 28.067 29.134 15.494 12.700 13.970 3.886 29.134 R 0.197 10.414 9.779 3.810 3.302 .914 1.397 5.207 4.699 6° 6° 2.794 .635 5.5° 10.414 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish 4 C3D03060A Rev. D Recommended Solder Pad Layout TO-220-2 Part Number Package Marking C3D03060A TO-220-2 C3D03060 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering Diode Model Diode Model CSD04060 VfVTT==VV If*RT T T+ T+If*R -3 V VTT==0.965 + (Tj *J*-1.3*10 ) -3) 1.01+(T -1.26*10 -3 RTT==0.096 + (Tj *J*1.06*10 ) -3) 0.14+(T 1.13*10 Note: Tj = Diode Junction Temperature In Degrees Celsius VT 5 C3D03060A Rev. D RT Notes • RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. • REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. • This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C3D03060A Rev. D Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power