Cree® XLamp® XHP50 LEDs Product Description FEATURES Table of Contents Powered by Cree’s groundbreaking SC5 • Available in white, configurable to 6 V Characteristics...............................................2 Technology™ Platform, the XLamp XHP50 or 12 V by PCB layout Flux Characteristics, EasyWhite® Order LED is a member of Cree’s Extreme • Available in 5-step EasyWhite® bins High Power (XHP) class of LEDs that at 3000 K to 5000 K CCT, 3-step Flux Characteristics, ANSI White Order redefines lumen density and reliability EasyWhite bins at 2700 K to 5000 K Codes and Bins..............................................7 to radically reduce system costs by up and 2-step EasyWhite bins at 2700 K Relative Spectral Power Distribution......... 11 to 40 percent. At its maximum current, to 4000 K CCT Relative Flux vs. Junction Temperature..... 11 the XHP50 LED delivers twice the light output of the industry’s brightest single-die LED, the XLamp XM-L2 LED, with similar lumens per watt and without increasing • Available in ANSI white bins at 3000 K to 7000 K CCT • Available in standard, 70-, 80-, and 90‑minimum CRI options Codes and Bins..............................................3 Electrical Characteristics............................ 12 Relative Flux vs. Current............................. 13 Relative Chromaticity vs Current................ 14 Relative Chromaticity vs Temperature....... 15 the package footprint. The XHP50 LED • Binned at 85 °C Typical Spatial Distribution......................... 15 also achieves longer lifetime at higher • Maximum drive current: 3000 mA Thermal Design........................................... 16 operating temperatures than previous LED (6 V), 1500 mA (12 V) Performance Groups – Luminous Flux..... 17 technology. The result is significantly lower • Low thermal resistance: 1.2 °C/W Performance Groups – Chromaticity......... 17 thermal, mechanical and optical costs at • Wide viewing angle: 120° Cree’s Standard White Chromaticity the system level. • Unlimited floor life at Regions Plotted on the 1931 CIE Curve..... 21 ≤ 30 ºC/85% RH • Reflow solderable - JEDEC J‑STD‑020C • RoHS‑compliant • UL recognized component ® (E349212) Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions... 24 Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................. 25 Bin and Order-Code Format........................ 26 Reflow Soldering Characteristics............... 27 Notes........................................................... 28 www.cree.com/Xlamp Mechanical Dimensions............................. 29 Electrical Configuration.............................. 31 Tape and Reel.............................................. 31 Packaging.................................................... 32 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 CLD-DS111 Rev 1B Product family data sheet XLamp ® XHP50 LED Characteristics XHP50 LEDs are tested and binned in production in the 12‑V configuration. See the Mechanical Dimensions section on page 29 for pad layout options. Characteristics Unit Thermal resistance, junction to solder point °C/W 1.2 degrees 120 Temperature coefficient of voltage (6 V)* mV/°C -4.5 Temperature coefficient of voltage (12 V) mV/°C -9 Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 DC forward current (6 V)* mA 3000 DC forward current (12 V) mA 1500 Reverse voltage V -5 Forward voltage (6 V, @ 1400 mA, 85 °C)* V 5.75 6.3 Forward voltage (12 V, @ 700 mA, 85 °C) V 11.5 12.6 LED junction temperature °C 150 Note: * Data for the 6‑V configuration is calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® XHP50 LED Flux Characteristics, EasyWhite® Order Codes and Bins The following table provides order codes for XLamp XHP50 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 26). Binning condition: TJ = 85 °C; 12 V, IF = 700 mA Reference condition: TJ = 85 °C; 6 V, IF = 1400 mA CRI Nominal CCT Min 70 80 5000 K 90 Typ Minimum Luminous Flux 2-Step 3-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* J4 1120 1284 J2 1040 1192 H4 970 1112 J2 1040 1192 H4 970 1112 H2 900 1032 XHP50A-00-00000D0HH250G H2 900 1032 XHP50A-00-00000D0UH250G G4 840 963 XHP50A-00-00000D0UG450G G2 780 894 F4 730 837 XHP50A-00-00000D0UF450G F2 680 780 XHP50A-00-00000D0UF250G Group Order Code Group Order Code 5-Step Group Order Code XHP50A-00-00000D0BJ450E 50E XHP50A-00-00000D0BJ250E XHP50A-00-00000D0BH450E XHP50A-00-00000D0HJ250G 50G 50G XHP50A-00-00000D0HH450G XHP50A-00-00000D0UG250G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). • Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® XHP50 LED Flux Characteristics, EasyWhite® Order Codes and Bins - Continued CRI Nominal CCT Min 70 80 Typ Minimum Luminous Flux 2-Step 3-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* J4 1120 1284 J2 1040 1192 H4 970 1112 H4 970 1112 H2 900 1032 G4 840 963 XHP50A-00-00000D0HG445G G4 840 963 XHP50A-00-00000D0UG445G G2 780 894 XHP50A-00-00000D0UG245G F4 730 837 XHP50A-00-00000D0UF445G F2 680 780 XHP50A-00-00000D0UF245G J4 1120 1284 J2 1040 1192 H4 970 1112 H4 970 1112 H2 900 1032 G4 840 963 XHP50A-00-00000D0HG440H XHP50A-00-00000D0HG440G G4 840 963 XHP50A-00-00000D0UG440H XHP50A-00-00000D0UG440G G2 780 894 XHP50A-00-00000D0UG240H XHP50A-00-00000D0UG240G F4 730 837 XHP50A-00-00000D0UF440H F2 680 780 XHP50A-00-00000D0UF240H Group Order Code Group 45E XHP50A-00-00000D0BJ245E XHP50A-00-00000D0HH445G 45G 45G XHP50A-00-00000D0HH245G XHP50A-00-00000D0BJ440E 40E XHP50A-00-00000D0BJ240E XHP50A-00-00000D0BH440E XHP50A-00-00000D0HH440H 40H 4000 K 90 Order Code XHP50A-00-00000D0BH445E 90 80 Group XHP50A-00-00000D0BJ445E 4500 K 70 Order Code 5-Step 40H XHP50A-00-00000D0HH240H XHP50A-00-00000D0HH440G 40G 40G XHP50A-00-00000D0HH240G XHP50A-00-00000D0UF440G XHP50A-00-00000D0UF240G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). • Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® XHP50 LED Flux Characteristics, EasyWhite® Order Codes and Bins - Continued CRI Nominal CCT Min Typ Minimum Luminous Flux Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1112 2-Step Group Order Code 3-Step Group Order Code 70 80 3500 K H2 900 1032 H4 970 1112 H2 900 1032 G4 840 963 XHP50A-00-00000D0HG435H XHP50A-00-00000D0HG435G G4 840 963 XHP50A-00-00000D0UG435H XHP50A-00-00000D0UG435G G2 780 894 XHP50A-00-00000D0HH435H 35H 35H XHP50A-00-00000D0HH235H XHP50A-00-00000D0UG235H F4 730 837 XHP50A-00-00000D0UF435H F2 680 780 XHP50A-00-00000D0UF235H H4 970 1112 H2 900 1032 G4 840 963 H4 970 1112 H2 900 1032 80 3000 K Group 35E 90 70 5-Step XHP50A-00-00000D0BH435E XHP50A-00-00000D0BH235E XHP50A-00-00000D0HH435G 35G 35G XHP50A-00-00000D0HH235G XHP50A-00-00000D0UG235G XHP50A-00-00000D0UF435G XHP50A-00-00000D0UF235G XHP50A-00-00000D0BH430E 30E XHP50A-00-00000D0BH230E XHP50A-00-00000D0BG430E XHP50A-00-00000D0HH430H 30H XHP50A-00-00000D0HH230H XHP50A-00-00000D0HH430G 30G XHP50A-00-00000D0HH230G G4 840 963 XHP50A-00-00000D0HG430H G2 780 894 XHP50A-00-00000D0HG230H XHP50A-00-00000D0HG230G G2 780 894 XHP50A-00-00000D0UG230H XHP50A-00-00000D0UG230G F4 730 837 XHP50A-00-00000D0UF430H XHP50A-00-00000D0UF430G F2 680 780 XHP50A-00-00000D0UF230H E4 635 728 XHP50A-00-00000D0UE430H 90 Order Code 30H 30G XHP50A-00-00000D0HG430G XHP50A-00-00000D0UF230G XHP50A-00-00000D0UE430G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). • Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® XHP50 LED Flux Characteristics, EasyWhite® Order Codes and Bins - Continued CRI Nominal CCT Min 80 Typ Minimum Luminous Flux 2-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H2 900 1032 G4 840 963 G2 780 894 XHP50A-00-00000D0HG227H XHP50A-00-00000D0HG227G F4 730 837 XHP50A-00-00000D0UF427H XHP50A-00-00000D0UF427G F2 680 780 E4 635 728 Group Order Code Group XHP50A-00-00000D0HH227H 27H 2700 K 90 3-Step 27H XHP50A-00-00000D0HG427H XHP50A-00-00000D0UF227H XHP50A-00-00000D0UE427H Order Code 5-Step Group Order Code XHP50A-00-00000D0HH227G 27G 27G XHP50A-00-00000D0HG427G XHP50A-00-00000D0UF227G XHP50A-00-00000D0UE427G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). • Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® XHP50 LED Flux Characteristics, ANSI White Order Codes and Bins The following table provides order codes for XLamp XHP50 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 26). Binning condition: TJ = 85 °C; 12 V, IF = 700 mA Reference condition: TJ = 85 °C; 6 V, IF = 1400 mA Nominal CCT CRI Chromaticity Regions Minimum Luminous Flux Min Typ 0 68 70 7000 K 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U 80 90 0 70 6500 K 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 80 90 68 Order Code Group Flux l(m) @ 85 °C Flux (lm) @ 25 °C* J4 1120 1284 J2 1040 1192 XHP50A-00-0000-0D00J20DT J4 1120 1284 XHP50A-00-0000-0D0BJ40DT J2 1040 1192 XHP50A-00-0000-0D0BJ20DT XHP50A-00-0000-0D00J40DT J2 1040 1192 XHP50A-00-0000-0D0HJ20DT H4 970 1112 XHP50A-00-0000-0D0HH40DT H2 900 1032 XHP50A-00-0000-0D0HH20DT H2 900 1032 XHP50A-00-0000-0D0UH20DT G4 840 963 XHP50A-00-0000-0D0UG40DT G2 780 894 XHP50A-00-0000-0D0UG20DT XHP50A-00-0000-0D0UF40DT F4 730 837 J4 1120 1284 XHP50A-00-0000-0D00J40CB J2 1040 1192 XHP50A-00-0000-0D00J20CB J4 1120 1284 XHP50A-00-0000-0D0BJ40CB J2 1040 1192 XHP50A-00-0000-0D0BJ20CB J2 1040 1192 XHP50A-00-0000-0D0HJ20CB H4 970 1112 XHP50A-00-0000-0D0HH40CB H2 900 1032 XHP50A-00-0000-0D0HH20CB H2 900 1032 XHP50A-00-0000-0D0UH20CB G4 840 963 XHP50A-00-0000-0D0UG40CB G2 780 894 XHP50A-00-0000-0D0UG20CB F4 730 837 XHP50A-00-0000-0D0UF40CB Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). • Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® XHP50 LED Flux Characteristics, ANSI White Order codes and Bins - Continued Nominal CCT CRI Chromaticity Regions Minimum Luminous Flux Min Typ 0 68 70 6500 K 1A, 1B, 1C, 1D 80 90 0 68 70 6000 K 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 80 90 0 70 5700 K 2A, 2B, 2C, 2D 80 90 68 Order Code Group Flux l(m) @ 85 °C Flux (lm) @ 25 °C* J4 1120 1284 XHP50A-00-0000-0D00J40E1 J2 1040 1192 XHP50A-00-0000-0D00J20E1 J4 1120 1284 XHP50A-00-0000-0D0BJ40E1 J2 1040 1192 XHP50A-00-0000-0D0BJ20E1 J2 1040 1192 XHP50A-00-0000-0D0HJ20E1 H4 970 1112 XHP50A-00-0000-0D0HH40E1 H2 900 1032 XHP50A-00-0000-0D0HH20E1 H2 900 1032 XHP50A-00-0000-0D0UH20E1 G4 840 963 XHP50A-00-0000-0D0UG40E1 XHP50A-00-0000-0D0UG20E1 G2 780 894 F4 730 837 XHP50A-00-0000-0D0UF40E1 J4 1120 1284 XHP50A-00-0000-0D00J40DV J2 1040 1192 XHP50A-00-0000-0D00J20DV J4 1120 1284 XHP50A-00-0000-0D0BJ40DV J2 1040 1192 XHP50A-00-0000-0D0BJ20DV J2 1040 1192 XHP50A-00-0000-0D0HJ20DV H4 970 1112 XHP50A-00-0000-0D0HH40DV H2 900 1032 XHP50A-00-0000-0D0HH20DV H2 900 1032 XHP50A-00-0000-0D0UH20DV G4 840 963 XHP50A-00-0000-0D0UG40DV G2 780 894 XHP50A-00-0000-0D0UG20DV F4 730 837 XHP50A-00-0000-0D0UF40DV J4 1120 1284 XHP50A-00-0000-0D00J40E2 J2 1040 1192 XHP50A-00-0000-0D00J20E2 J4 1120 1284 XHP50A-00-0000-0D0BJ40E2 J2 1040 1192 XHP50A-00-0000-0D0BJ20E2 J2 1040 1192 XHP50A-00-0000-0D0HJ20E2 H4 970 1112 XHP50A-00-0000-0D0HH40E2 H2 900 1032 XHP50A-00-0000-0D0HH20E2 H2 900 1032 XHP50A-00-0000-0D0UH20E2 G4 840 963 XHP50A-00-0000-0D0UG40E2 G2 780 894 XHP50A-00-0000-0D0UG20E2 F4 730 837 XHP50A-00-0000-0D0UF40E2 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® XHP50 LED Flux Characteristics, ANSI White Order codes and Bins - Continued Nominal CCT CRI Chromaticity Regions Minimum Luminous Flux Min Typ 0 68 70 5000 K 3A, 3B, 3C, 3D 80 90 0 70 4500 K 4A, 4B, 4C, 4D 80 90 68 Order Code Group Flux l(m) @ 85 °C Flux (lm) @ 25 °C* J4 1120 1284 XHP50A-00-0000-0D00J40E3 J2 1040 1192 HP50A-00-0000-0D00J20E3 H4 970 1112 XHP50A-00-0000-0D00H40E3 J4 1120 1284 XHP50A-00-0000-0D0BJ40E3 J2 1040 1192 XHP50A-00-0000-0D0BJ20E3 H4 970 1112 XHP50A-00-0000-0D0BH40E3 J2 1040 1192 XHP50A-00-0000-0D0HJ20E3 H4 970 1112 XHP50A-00-0000-0D0HH40E3 H2 900 1032 XHP50A-00-0000-0D0HH20E3 H2 900 1032 XHP50A-00-0000-0D0UH20E3 G4 840 963 XHP50A-00-0000-0D0UG40E3 G2 780 894 XHP50A-00-0000-0D0UG20E3 F4 730 837 XHP50A-00-0000-0D0UF40E3 F2 680 780 XHP50A-00-0000-0D0UF20E3 J4 1120 1284 XHP50A-00-0000-0D00J40E4 J2 1040 1192 XHP50A-00-0000-0D00J20E4 H4 970 1112 XHP50A-00-0000-0D00H40E4 J4 1120 1284 XHP50A-00-0000-0D0BJ40E4 J2 1040 1192 XHP50A-00-0000-0D0BJ20E4 H4 970 1112 XHP50A-00-0000-0D0BH40E4 H4 970 1112 XHP50A-00-0000-0D0HH40E4 H2 900 1032 XHP50A-00-0000-0D0HH20E4 XHP50A-00-0000-0D0HG40E4 G4 840 963 G4 840 963 XHP50A-00-0000-0D0UG40E4 G2 780 894 XHP50A-00-0000-0D0UG20E4 F4 730 837 XHP50A-00-0000-0D0UF40E4 F2 680 780 XHP50A-00-0000-0D0UF20E4 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). • Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® XHP50 LED Flux Characteristics, ANSI White Order codes and Bins - Continued Nominal CCT CRI Chromaticity Regions Min Typ 0 68 70 4000 K 5A, 5B, 5C, 5D 80 90 3500 K 3000 K 6A, 6B, 6C, 6D 7A, 7B, 7C, 7D Minimum Luminous Flux 70 70 Group Flux l(m) @ 85 °C Flux (lm) @ 25 °C* Order Code J2 1040 1192 XHP50A-00-0000-0D00J20E5 H4 970 1112 XHP50A-00-0000-0D00H40E5 J2 1040 1192 XHP50A-00-0000-0D0BJ20E5 H4 970 1112 XHP50A-00-0000-0D0BH40E5 H4 970 1112 XHP50A-00-0000-0D0HH40E5 H2 900 1032 XHP50A-00-0000-0D0HH20E5 XHP50A-00-0000-0D0HG40E5 G4 840 963 G4 840 963 XHP50A-00-0000-0D0UG40E5 G2 780 894 XHP50A-00-0000-0D0UG20E5 F4 730 837 XHP50A-00-0000-0D0UF40E5 F2 680 780 XHP50A-00-0000-0D0UF20E5 J2 1040 1192 XHP50A-00-0000-0D0BJ20E6 H4 970 1112 XHP50A-00-0000-0D0BH40E6 H2 900 1032 XHP50A-00-0000-0D0BH20E6 J2 1040 1192 XHP50A-00-0000-0D0BJ20E7 H4 970 1112 XHP50A-00-0000-0D0BH40E7 H2 900 1032 XHP50A-00-0000-0D0BH20E7 G4 840 963 XHP50A-00-0000-0D0BG40E7 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). • Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® XHP50 LED Relative Spectral Power Relative Spectral Power Distribution 100% Relative Radiant Power 80% 60% 6500 K, 68 CRI 3000 K, 80 CRI 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux vs. Junction Temperature Relative Flux Output vs. Junction Temperature Reference condition: 6 V, IF = 1400 mA; 12 V, IF = 700 mA 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® XHP50 LED Electrical Characteristics (TJ = 85 °C) 3000 Forward Current (mA) 2500 2000 6V 1500 1000 500 0 5.25 5.50 5.75 6.00 6.25 Forward Voltage (V) Electrical Characteristics (Tj = 85°C) 1500 Forward Current (mA) 1250 1000 750 12 V 500 250 0 10.5 11.0 11.5 12.0 12.5 Forward Voltage (V) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® XHP50 LED Relative Flux vs. Current (TJ = 85 °C) 200% 180% Relative Luminous Flux 160% 140% 120% 100% 6V 80% 60% 40% 20% 0% 0 500 1000 1500 2000 2500 3000 Forward Current (mA) Relative Intensity vs. Current (Tj = 85°C) 200% Relative Luminous Flux 180% 160% 140% 120% 100% 12 V 80% 60% 40% 20% 0% 0 250 500 750 1000 1250 1500 Forward Current (mA) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® XHP50 LED Relative Chromaticity vs Current (Warm White) 0.020 0.016 0.012 6V 0.008 0.004 ΔCCx 0.000 ΔCCy -0.004 -0.008 -0.012 -0.016 -0.020 0 500 1000 1500 2000 2500 3000 Current (mA) Relative Chromaticity Vs. Current, WW 0.020 0.016 0.012 12 V 0.008 0.004 ΔCCx 0.000 ΔCCy -0.004 -0.008 -0.012 -0.016 -0.020 0 250 500 750 1000 1250 1500 Current (mA) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® XHP50 LED Relative Chromaticity vs Temperature (Warm White) Relative Chromaticity Temperature Reference condition: 6 V, IF Vs. = 1400 mA; 12 V,WW IF = 700 mA 0.020 0.016 0.012 0.008 0.004 ΔCCx 0.000 ΔCCy -0.004 -0.008 -0.012 -0.016 -0.020 25 50 75 100 125 150 Tj (°C) Typical Spatial Distribution Typical Spatial Radiation Pattern Reference condition: TJ = 85 °C; 6 V, IF = 1400 mA; 12 V, IF = 700 mA Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle (º) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15 XLamp ® XHP50 LED Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 3200 Maximum Current (mA) 2800 6V 2400 2000 1600 1200 Rj-a = 2°C/W Rj-a = 4°C/W 800 Rj-a = 6°C/W 400 0 Rj-a = 8°C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Thermal Design 1600 Maximum Current (mA) 1400 12 V 1200 1000 800 600 Rj-a = 2°C/W Rj-a = 4°C/W 400 Rj-a = 6°C/W 200 0 Rj-a = 8°C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® XHP50 LED Performance Groups – Luminous Flux (TJ = 85 °C) XLamp XHP50 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Min. Luminous Flux Max. Luminous Flux E4 635 680 F2 680 730 F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 Performance Groups – Chromaticity XLamp XHP50 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Bin Code 40H 35H 30H 27H CCT 4000 K 3500 K 3000 K 2700 K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® XHP50 LED Performance Groups – Chromaticity (continued) EasyWhite Color Temperatures – 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle (°) 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 45G 4500 K 0.3611 0.3658 0.00852 0.00330 61.5 40G 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis Bin Code CCT 50G Center Point EasyWhite Color Temperatures – 5-Step Ellipse Center Point Bin Code CCT 50E 5000 K x y a b Rotation Angle (°) 0.3447 0.3553 0.01400 0.00520 65.0 45E 4500 K 0.3611 0.3658 0.01420 0.00550 61.5 40E 4000 K 0.3818 0.3797 0.01565 0.00670 53.7 35E 3500 K 0.4073 0.3917 0.01545 0.00690 54.0 30E 3000 K 0.4338 0.4030 0.01390 0.00680 53.2 ANSI White Bins CCT Bin Code 0A0 0B0 7000 K 0C0 0D0 ANSI White Bins x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 CCT Bin Code 0R0 ANSI White Bins x y 0.2980 0.2880 0.2950 0.2970 0.3009 0.3042 CCT Bin Code 1A0 x y 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3009 0.3042 0.3037 0.2937 0.3068 0.3113 0.2920 0.3060 0.2895 0.3135 0.3028 0.3304 0.2895 0.3135 0.2870 0.3210 0.3115 0.3391 0.2962 0.3220 0.2937 0.3312 0.3130 0.3290 0.2984 0.3133 0.2962 0.3220 0.3048 0.3207 0.2984 0.3133 0.2962 0.3220 0.3115 0.3391 0.2962 0.3220 0.2937 0.3312 0.3205 0.3481 0.3028 0.3304 0.3005 0.3415 0.3213 0.3373 0.3048 0.3207 0.3028 0.3304 0.3130 0.3290 0S0 7000 K 0T0 1B0 7000 K 1C0 0.2984 0.3133 0.3037 0.2937 0.3130 0.3290 0.3048 0.3207 0.3009 0.3042 0.3213 0.3373 0.3068 0.3113 0.3068 0.3113 0.3221 0.3261 0.3009 0.3042 0.3093 0.2993 0.3144 0.3186 0U0 1D0 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18 XLamp ® XHP50 LED Performance Groups – Chromaticity (continued) ANSI White Bins CCT Bin Code 1R0 1S0 7000 K 1T0 1U0 ANSI White Bins x y 0.3068 0.3113 CCT 0.3144 0.3186 Bin Code 2A0 ANSI White Bins x y 0.3215 0.3350 CCT 0.3290 0.3417 Bin Code 2R0 x y 0.3222 0.3243 0.3290 0.3300 0.3161 0.3059 0.3290 0.3300 0.3290 0.3180 0.3093 0.2993 0.3222 0.3243 0.3231 0.3120 0.3005 0.3415 0.3207 0.3462 0.3196 0.3602 0.3099 0.3509 0.3115 0.3391 0.3028 0.3304 0.3099 0.3509 0.3196 0.3602 0.3205 0.3481 0.3115 0.3391 2B0 6000 K 2C0 0.3290 0.3538 0.3290 0.3417 0.3215 0.3350 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3417 2S0 6000 K 2T0 0.3290 0.3690 0.3290 0.3538 0.3207 0.3462 0.3290 0.3690 0.3381 0.3762 0.3376 0.3616 0.3290 0.3538 0.3144 0.3186 0.3290 0.3417 0.3290 0.3300 0.3221 0.3261 0.3371 0.3490 0.3366 0.3369 0.3231 0.3120 0.3366 0.3369 0.3361 0.3245 0.3161 0.3059 0.3290 0.3300 0.3290 0.3180 2D0 ANSI White Bins CCT Bin Code 3A0 3B0 5000 K 3C0 3D0 2U0 ANSI White Bins x y CCT Bin Code x y .3371 .3451 .3490 0.3530 0.3597 .3554 0.3615 .3440 .3427 0.3659 0.3512 0.3465 .3366 .3369 0.3515 0.3487 .3376 .3616 0.3548 0.3736 .3463 .3687 0.3641 0.3804 .3451 .3554 0.3530 0.3597 .3371 .3490 .3463 .3687 .3551 .3760 .3533 .3620 .3451 .3554 .3451 .3554 .3533 .3620 .3515 .3487 .3440 .3427 4A0 4B0 4500 K 4C0 4D0 0.3533 0.362 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3615 0.3659 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3590 0.3521 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 19 XLamp ® XHP50 LED Performance Groups – Chromaticity (continued) ANSI White Bins CCT Bin Code 5A0 5B0 4000 K 5C0 5D0 ANSI White Bins x y .3670 .3578 .3702 .3722 CCT Bin Code 6A0 ANSI White Bins x y .3889 .3690 .3941 .3848 CCT Bin Code 7A0 x y .4147 .3814 .4221 .3984 .3825 .3798 .4080 .3916 .4342 .4028 .3783 .3646 .4017 .3751 .4259 .3853 .3702 .3722 .3941 .3848 .4221 .3984 .3736 .3874 .3869 .3958 .3825 .3798 .3825 .3798 6B0 3500 K .3996 .4015 .4146 .4089 .4080 .3916 .4080 .3916 .4089 .4165 .4221 .3984 .4165 .4212 .4342 .4028 .4342 .4028 .3869 .3958 .4044 .3950 .3875 .3783 .3646 .4017 .3751 .4259 .3853 .3825 .3798 .4080 .3916 .4342 .4028 .3950 .3875 .4221 .3984 .4465 .4071 .3898 .3716 .4147 .3814 .4373 .3893 6D0 .4146 3000 K .4299 .4430 .4006 6C0 .4299 7B0 7C0 7D0 .4430 .4212 .4562 .4260 .4465 .4071 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 20 XLamp ® XHP50 LED Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 0.37 6500 K 2T 0.36 2S CCy 0.35 2C 1T 8000 K 2B 1S 0.34 0T 0.33 0S 0.32 0B 0.31 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 0.30 2A 1B 0C 2D 1C 1R 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 21 XLamp ® XHP50 LED Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve - Continued ANSI Neutral White and ANSI Warm White 0.45 0.44 2700 K 3000 K 0.43 0.42 3500 K 0.41 4000 K 6C 0.40 CCy 7C 7B 0.39 5000 K 0.38 4C 0.37 3C 3B 3D 0.35 4B 7D 7A 5C 6D 5B 5700 K 0.36 6B 4500 K 5D 6A 5A ANSI C78.377A 4D 4A 3A 0.34 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 22 XLamp ® XHP50 LED Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve - Continued 0.44 ANSI C78.377 Quadrangle 0.43 EasyWhite 5-Step EasyWhite 3-Step 0.42 3500 K EasyWhite 2-Step 0.41 2700 K 3000 K 4000 K 0.40 4500 K 0.39 5000 K 0.38 CCy 0.37 5700 K 0.36 6500 K 0.35 0.34 8000 K 0.33 0.32 0.31 0.30 0.29 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 23 XLamp ® XHP50 LED Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 0.38 5700 K 0.37 5700 K 0.37 6500 K CB 2C 1T 8000 K 0.34 0T 0C 0A ANSI C78.377A 2R 1U 0D 0S 0.32 0B 1R 0A ANSI C78.377A 1U 1R 0U 0.36 0.30 0.28 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.36 0.28 0.35 0R 0.29 0.29 2U 2R 1A 0.30 0.29 0.28 2A 1D 0D 0R CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 DV 6500 K 0.36 0.36 2C 8000 K 0A 0R 1R 0U CCx 0.36 0.35 0.34 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 ANSI C78.377A 2R 1U 0R 0.29 0.29 2U 1A 0D 0.30 0.29 0.28 0C 0B 0.31 1R 0U 0.30 0S 0.32 1D 0.33 0A CCy 1U 3R 2A 1B 0.32 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 3A 2D 1C 0.31 0C 0B 1D 2C 2B 1S 0.30 0S 0.32 2A 1B 3B 2S 1T 8000 K 0.34 0.29 0T 0.33 2D 1C 2T E1 0.35 2B 1S 3S 6500 K 2T 1T 0.34 5700 K 0.37 2S 0.35 5000 K 0.39 5700 K 0.37 CCy 2D 1C 1B 0C 0.31 0U 0.30 0T 0.33 2U 1D 1A 2B 0.34 0B 0.31 2A 2C 1T 1S 0.33 0S 0.32 2D 1C 1B DT 8000 K 0.34 0.32 0.33 2S 0.35 2B 1S 2T 0.36 0.31 0.35 6500 K 2T 2S CCy 0.36 CCy 5000 K 0.39 CCx 0.40 5000 K 0.39 0.38 5700 K E2 0.37 6500 K 0.36 3B 2S 0.35 CCy 3S 2T 2C 1T 8000 K 0.34 0T 0.33 0S 0.32 0C 0A 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 2D 1C 1B 0B 0.31 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 24 XLamp ® XHP50 LED Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.45 0.44 2700 K 3000 K 0.43 E7 0.42 3500 K 4000 K CCy 0.40 0.39 5000 K 0.38 E4 4B 3C 0.36 3B 3D 0.35 7B 6C 6B 7D 7A 5C 6D 5B 4C E3 0.37 E5 4500 K 7C E6 0.41 6A ANSI C78.377A 5D 5A 4D 4A 3A 0.34 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 25 XLamp ® XHP50 LED Bin and Order-Code Format Bin codes and order codes for XHP50 LEDs are configured in the following manner: Order Code Bin Code Series XHP50A = XHP50 Series XHP50A = XHP50 Internal code Chromaticity group Minimum luminous flux group Vf Class D = 6-V/12-V configurable SSSSSS-BD-GGGG-HJKLMMNNN Chromaticity group CRI specification 0 = No Minimum CRI B = 70 CRI Minimum H = 80 CRI Minimum U = 90 CRI Minimum Vf Class D = 6-V/12-V configurable Configuration B = Internal code D = Reel size CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum SSSSSS-E-NNN-MMM-JK-L-PP Internal code Voltage performance group Luminous flux group Internal code Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 26 XLamp ® XHP50 LED Reflow Soldering Characteristics In testing, Cree has found XLamp XHP50 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 °C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 27 XLamp ® XHP50 LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM‑80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XHP50 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 28 XLamp ® XHP50 LED Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. All dimensions are ±.13 mm unless otherwise indicated. .73 .73 5.00 5.00 4.78 4.78 2.78 2.78 .50 .50 .50 .50 .50 .50 R2.85 R2.85 .50 .50 5.00 5.00 4.78 2.14 2.14 Side View Top View .73 .73 .50 .50 .50 4.78 4.78 2.78 2.78 4.78 .50 .50.50 .50 4.78 .50 .50 2.78 R2.85 4.78 REF. 4.78 REF. .50 2.78 .50 Anode Side Cathode Side .50 4.78 4.78 4.78 PRIMARY PRIMARY 3.58 3.58 2.14 4.78 4.78 4.78 .50 .50 .50 .50 Anode Side 2.14 2.14 .50 2.14 Cathode Side 4.78 REF. 4.78 REF. .50 4.78 .50 4.78 .50 .80 2.14 3.58 ALTERNATIVE ALTERNATIVE PRIMARY Alternate Bottom Bottom View PRIMARY .50 .50View .50 As shown in these bottom views,.50thermal .50 pad is electrically isloated 3.58 .25 .50 .25 .80 .50 .50 2.14 RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD 12V 12V RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD 6V 6V 4.78 4.78 4.78 .80 .50 .50 .50 .50 2.14 2.14 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2.14 2.14 4.78 .50 .50 .50 .504.78 4.78 4.78 .25 .25 .50 .50 29 2.14 2.14 PRIMARY PRIMARY 3.58 3.58 XLamp ® XHP50 LED Mechanical Dimensions - Continued 4.78 2.78 .50 4.78 4.78 .50 .50.50 .50 4.78 REF. 4.78 4.78 .50.50 2.78 2.78 .50.50 .50.50 .50 2.14 2.14 4.78 4.78 4.78 4.78 REF. 4.78 4.78 .50.50 2.14 .50.50 .25.25 4.78 4.78 .80.80 2.14 2.14 PRIMARY ALTERNATIVE .50.50 .50.50 .50.50 Recommended PCB Solder Pad 6 V Configuration (thermal pad is electrically isolated) RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD 6V6V RE Recommended PCB Solder Pad 12 V Configuration (thermal padRECOMMENDED is connectedPCB to anode and RECOMMENDED PCB SOLDER PAD cathode and is not SOLDER PAD 12V isolated) 12V electrically .25 .80 4.78 .50 .50 .50 2.14 4.78 .50 .50 .25 4.78 .80 2.14 .50 COMMENDED PCB SOLDER PAD 12V .97 4.78 Recommended Stencil Pattern RECOMMENDED STENCIL PATTERN (HATCHED IS OPENING) 6 V & 12 VAREA Configurations 6v/12v (shaded area is open) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 30 POSITIVE A NEGATIVE B XLamp ® XHP50 LED Electrical Configuration 12 V 6V SOLDER PAD LINK NEGATIVE A POSITIVE A NEGATIVE B POSITIVE B 6 6 OTICE THIS PLOT AND THE INFORMATION RE THE PROPRIETARY AND MATION OF CREE, INC. THIS PLOT REPRODUCED OR DISCLOSED TO ANY ON WITHOUTTHE WRITTEN CONSENT NEGATIVE B 5 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON 5 WITHOUTTHE WRITTEN CONSENT OF CREE INC. 6-V Configuration POSITIVE A 4 3 REV B 4 3 12-V Configuration 6V D 2 REVISONS REV DESCRIPTION B REVERSED POLARITY IN VIEW Tape and Reel All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. NEGATIVE A 4 1.5 All dimensions are ±.13 mm unless otherwise indicated. 1.5 4 8 CATHODE SIDE User Feed Direction 4 8 END User Feed Direction NEGATIVE B END POSITIVE A CATHODE SIDE 1.75 START POSITIVE B 4 1.75 START 3.7 12 C ANODE SIDE Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) Trailer 160mm (min) of empty pockets ANODE sealed with tape (15 pockets min.) Loaded Pockets (500 Lamps) Loaded Pockets (500 Lamps) SIDE Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 12 Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 5.3 0.36 User Feed Direction B User Feed Direction 13mm 13mm 7.0" A Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ® 7.0" UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 logo, XLamp® and EasyWhite® are registered trademarks and SC5± .125 .XXX X° ± .5 ° DATE DRAWN BY THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED D. CRONIN 12/9/14 FOR SHEET METAL PARTS ONLY DIMENSIONS ARE IN .X ± 1.5 CHECK DATE MILLIMETERS AND AFTER FINISH. .XX ± .75 --TOLERANCE UNLESS SPECIFIED: .XXX ± .25 .XX ± .25 APPROVED DATE X° ± .5 ° TITLE .XXX ± .125 --SURFACE FINISH: 1.6 D C A M 31 F XLamp ® XHP50 LED Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 32