Cree® XLamp® CXA1510 LED Product Description features The XLamp® CXA1510 LED array • Available in 4-step, 3‑step and 2-step Table of Contents Characteristics.............................................2 expands Cree’s family of high‑flux, EasyWhite bins at 2700 K, 3000 K, Operating Limits...........................................3 multi‑die arrays in a smaller, easy‑to‑use 3500 K, 4000 K & 5000 K CCT and Flux Characteristics, EasyWhite® Order platform. With XLamp LED lighting‑class 4-step EasyWhite bins at 5700 K & Codes and Bins - 18 V..................................4 reliability, 6500 K CCT Flux Characteristics, ANSI White Order the CXA1510’s small, uniform emitting surface enables both ® • Available in ANSI white bins at Codes and Bins - 18 V..................................8 directional and non‑directional lighting 4000 K, 5000 K, 5700 K & 6500 K Flux Characteristics, EasyWhite® Order applications including lamp retrofit and CCT Codes and Bins - 36 V..................................9 luminaire designs. Available in 2‑step, 3‑step and 4‑step color consistency, and featuring a 9‑mm optical source, the CXA1510 brings new levels of flux and efficacy to this form factor. The CX LED Design Guide provides basic information on the requirements to use the CXA1510 LED successfully in luminaire designs. • Available in 70-, 80-, 90- and 93‑minimum CRI options • Forward voltage options: 18‑V class & 36‑V class Flux Characteristics, ANSI White Order Codes and Bins - 36 V............................... 13 Relative Spectral Power Distribution....... 14 Electrical Characteristics.......................... 15 • 85 °C binning and characterization Relative Luminous Flux............................. 16 • Maximum drive current: 900 mA Typical Spatial Distribution....................... 18 (18 V), 450 mA (36 V) • 115° viewing angle, uniform chromaticity profile Performance Groups - Brightness........... 18 Performance Groups - Chromaticity........ 19 Cree EasyWhite® Bins Plotted on the • Top-side solder connections 1931 CIE Color Space .............................. 22 • Thermocouple attach point Cree ANSI White Bins Plotted on the • NEMA SSL-3 2011 standard flux bins 1931 CIE Color Space............................... 22 • RoHS‑compliant Bin and Order Code Formats.................... 23 • UL recognized component ® (E349212) CLD-DS106 Rev 3D Product family data sheet Mechanical Dimensions........................... 23 Thermal Design......................................... 24 www.cree.com/Xlamp Notes......................................................... 26 Packaging.................................................. 27 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® CXA1510 LED Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Unit degrees Minimum Typical Maximum 115 V 8000 DC forward current (18 V) mA 900* DC forward current (36 V) mA 450* Reverse current (18 V, 36V) mA 0.1 Forward voltage (18 V, 500 mA, 85 °C) V Forward voltage (18 V, 500 mA, 25 °C) V Forward voltage (36 V, 250 mA, 85 °C) V Forward voltage (36 V, 250 mA, 25 °C) V * 17.5 21 35 42 Refer to the Operating Limits section. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® CXA1510 LED Operating Limits The maximum current rating of the CXA1510 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions CXA1510 - 18 V section on page 23 for the location of the Tc measurement point. 1000 800 If (mA) 600 18 V 400 200 0 0 25 50 75 100 125 150 Case Temperature (°C) CXA1510 - 36 V 500 400 If (mA) 300 36 V 200 100 0 0 25 50 75 100 125 150 Case Temperature (°C) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® CXA1510 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1510 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 23). Nominal CCT CRI Min 70 Minimum Luminous Flux Typ 75 2-Step 3-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1076 J2 1040 1154 J4 1120 1243 CXA1510-0000000F00J465F H4 970 1076 CXA1510-0000000F0HH465F J2 1040 1154 J4 1120 1243 CXA1510-0000000F0HJ465F H4 970 1076 CXA1510-0000000F00H457F J2 1040 1154 J4 1120 1243 CXA1510-0000000F00J457F H4 970 1076 CXA1510-0000000F0HH457F J2 1040 1154 J4 1120 1243 CXA1510-0000000F0HJ457F G2 780 866 CXA1510-0000000F0UG257F G4 840 932 H2 900 999 Group Order Code Group Order Code Group CXA1510-0000000F00H465F 65F 6500 K 80 70 5700 K 80 90 --- 75 --- 95 Order Code 65F 57F 57F 57F CXA1510-0000000F00J265F CXA1510-0000000F0HJ265F CXA1510-0000000F00J257F CXA1510-0000000F0HJ257F CXA1510-0000000F0UG457F CXA1510-0000000F0UH257F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® CXA1510 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C) - Continued Nominal CCT CRI Min 70 5000 K 80 90 70 4000 K 80 90 Minimum Luminous Flux Typ 75 --- 95 75 --- 95 2-Step 3-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1076 J2 1040 1154 J4 1120 1243 CXA1510-0000000F00J450H H4 970 1076 CXA1510-0000000F0HH450H J2 1040 1154 J4 1120 1243 CXA1510-0000000F0HJ450H CXA1510-0000000F0HJ450G CXA1510-0000000F0HJ450F G2 780 866 CXA1510-0000000F0UG250H CXA1510-0000000F0UG250G CXA1510-0000000F0UG250F G4 840 932 H2 900 999 CXA1510-0000000F0UH250H H4 970 1076 CXA1510-0000000F00H440H J2 1040 1154 J4 1120 1243 CXA1510-0000000F00J440H H4 970 1076 CXA1510-0000000F0HH440H J2 1040 1154 J4 1120 1243 CXA1510-0000000F0HJ440H CXA1510-0000000F0HJ440G CXA1510-0000000F0HJ440F G2 780 866 CXA1510-0000000F0UG240H CXA1510-0000000F0UG240G CXA1510-0000000F0UG240F G4 840 932 H2 900 999 Group Order Code Group Order Code Group CXA1510-0000000F00H450H 50H 50H 50H 40H 40H 40H CXA1510-0000000F00H450F CXA1510-0000000F00J250H CXA1510-0000000F0HJ250H CXA1510-0000000F0UG450H 50F CXA1510-0000000F0UG440H CXA1510-0000000F0UH240H CXA1510-0000000F00J250F CXA1510-0000000F00J450F CXA1510-0000000F0HH450G 50G 50G CXA1510-0000000F0HJ250G CXA1510-0000000F0UG450G CXA1510-0000000F0HH450F 50H 50F CXA1510-0000000F0UH250G CXA1510-0000000F0HJ250F CXA1510-0000000F0UG450F CXA1510-0000000F0UH250F CXA1510-0000000F00H440F CXA1510-0000000F00J240H CXA1510-0000000F0HJ240H Order Code 40F CXA1510-0000000F00J240F CXA1510-0000000F00J440F CXA1510-0000000F0HH440G 40G 40G CXA1510-0000000F0HJ240G CXA1510-0000000F0UG440G CXA1510-0000000F0UH240G CXA1510-0000000F0HH440F 40F 40F CXA1510-0000000F0HJ240F CXA1510-0000000F0UG440F CXA1510-0000000F0UH240F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® CXA1510 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C) - Continued Nominal CCT CRI Min 80 3500 K 90 93 80 3000 K 90 93 Minimum Luminous Flux Typ --- 95 95 --- 95 95 2-Step 3-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H2 900 999 H4 970 1076 J2 1040 1154 CXA1510-0000000F00J235H CXA1510-0000000F00J235G CXA1510-0000000F00J235F F2 680 755 CXA1510-0000000F0UF235H CXA1510-0000000F0UF235G CXA1510-0000000F0UF235F F4 730 810 G2 780 866 CXA1510-0000000F0UG235H CXA1510-0000000F0UG235G CXA1510-0000000F0UG235F F2 680 755 CXA1510-0000000F0YF235H CXA1510-0000000F0YF235G CXA1510-0000000F0YF235F F4 730 810 G2 780 866 CXA1510-0000000F0YG235H CXA1510-0000000F0YG235G CXA1510-0000000F0YG235F H2 900 999 CXA1510-0000000F00H230H CXA1510-0000000F00H230G CXA1510-0000000F00H230F H4 970 1076 J2 1040 1154 CXA1510-0000000F00J230H CXA1510-0000000F00J230G CXA1510-0000000F00J230F F2 680 755 CXA1510-0000000F0UF230H CXA1510-0000000F0UF230G CXA1510-0000000F0UF230F F4 730 810 G2 780 866 CXA1510-0000000F0UG230H CXA1510-0000000F0UG230G CXA1510-0000000F0UG230F F2 680 755 CXA1510-0000000F0YF230H CXA1510-0000000F0YF230G CXA1510-0000000F0YF230F F4 730 810 G2 780 866 Group Order Code Group CXA1510-0000000F00H235H 35H 35H 35H 30H 30H 30H CXA1510-0000000F00H435H CXA1510-0000000F0UF435H CXA1510-0000000F0YF435H CXA1510-0000000F00H430H CXA1510-0000000F0UF430H CXA1510-0000000F0YF430H CXA1510-0000000F0YG230H Order Code Group CXA1510-0000000F00H235G 35G 35G 35G 30G 30G 30G CXA1510-0000000F00H435G CXA1510-0000000F0UF435G CXA1510-0000000F0YF435G CXA1510-0000000F00H430G CXA1510-0000000F0UF430G CXA1510-0000000F0YF430G CXA1510-0000000F0YG230G Order Code CXA1510-0000000F00H235F 35F 35F 35F 30F 30F 30F CXA1510-0000000F00H435F CXA1510-0000000F0UF435F CXA1510-0000000F0YF435F CXA1510-0000000F00H430F CXA1510-0000000F0UF430F CXA1510-0000000F0YF430F CXA1510-0000000F0YG230F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® CXA1510 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C) - Continued Nominal CCT CRI Min 80 2700 K 90 93 Minimum Luminous Flux Typ --- 95 95 2-Step 3-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* G4 840 932 H2 900 999 H4 970 1076 CXA1510-0000000F00H427H CXA1510-0000000F00H427G CXA1510-0000000F00H427F E4 635 707 CXA1510-0000000F0UE427H CXA1510-0000000F0UE427G CXA1510-0000000F0UE427F F2 680 755 F4 730 810 CXA1510-0000000F0UF427H CXA1510-0000000F0UF427G CXA1510-0000000F0UF427F E4 635 707 CXA1510-0000000F0YE427H CXA1510-0000000F0YE427G CXA1510-0000000F0YE427F F2 680 755 F4 730 810 Group Order Code Group CXA1510-0000000F00G427H 27H 27H 27H CXA1510-0000000F00H227H CXA1510-0000000F0UF227H CXA1510-0000000F0YF227H CXA1510-0000000F0YF427H Order Code Group CXA1510-0000000F00G427G 27G 27G 27G CXA1510-0000000F00H227G CXA1510-0000000F0UF227G CXA1510-0000000F0YF227G CXA1510-0000000F0YF227G Order Code CXA1510-0000000F00G427F 27F 27F 27F CXA1510-0000000F00H227F CXA1510-0000000F0UF227F CXA1510-0000000F0YF227F CXA1510-0000000F0YF427F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® CXA1510 LED Flux Characteristics, ANSI White Order Codes and Bins - 18 V (If = 500 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1510 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 23). Nominal CCT CRI Min 70 Minimum Luminous Flux Typ 75 6500 K 80 70 5700 K 80 90 70 --- 75 --- 95 75 5000 K 80 4000 K 70 --- 75 Chromaticity Regions Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1076 J2 1040 1154 J4 1120 1243 CXA1510-0000-000F00J40E1 H4 970 1076 CXA1510-0000-000F0HH40E1 J2 1040 1154 J4 1120 1243 CXA1510-0000-000F0HJ40E1 H4 970 1076 CXA1510-0000-000F00H40E2 J2 1040 1154 J4 1120 1243 CXA1510-0000-000F00J40E2 H4 970 1076 CXA1510-0000-000F0HH40E2 J2 1040 1154 J4 1120 1243 CXA1510-0000-000F0HJ40E2 G2 780 866 CXA1510-0000-000F0UG20E2 G4 840 932 CXA1510-0000-000F00H40E1 1A0, 1B0, 1C0, 1D0, 65F 1A0, 1B0, 1C0, 1D0, 65F 2A0, 2B0, 2C0, 2D0, 57F 2A0, 2B0, 2C0, 2D0, 57F 2A0, 2B0, 2C0, 1D0, 57F CXA1510-0000-000F00J20E1 CXA1510-0000-000F0HJ20E1 CXA1510-0000-000F00J20E2 CXA1510-0000-000F0HJ20E2 CXA1510-0000-000F0UG40E2 H2 900 999 CXA1510-0000-000F0UH20E2 H4 970 1076 CXA1510-0000-000F00H40E3 J2 1040 1154 J4 1120 1243 CXA1510-0000-000F00J40E3 H4 970 1076 CXA1510-0000-000F0HH40E3 J2 1040 1154 J4 1120 1243 CXA1510-0000-000F0HJ40E3 H4 970 1076 CXA1510-0000-000F00H40E5 J2 1040 1154 J4 1120 1243 3A0, 3B0, 3C0, 3D0, 50F 3A0, 3B0, 3C0, 3D0, 50F 5A0, 5B0, 5C0, 5D0, 40F CXA1510-0000-000F00J20E3 CXA1510-0000-000F0HJ20E3 CXA1510-0000-000F00J20E5 CXA1510-0000-000F00J40E5 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® CXA1510 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1510 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 23). Nominal CCT CRI Min 70 Minimum Luminous Flux Typ 75 2-Step 3-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1076 J2 1040 1154 J4 1120 1243 CXA1510-0000000N00J465F H4 970 1076 CXA1510-0000000N0HH465F J2 1040 1154 J4 1120 1243 CXA1510-0000000N0HJ465F H4 970 1076 CXA1510-0000000N00H457F J2 1040 1154 J4 1120 1243 CXA1510-0000000N00J457F H4 970 1076 CXA1510-0000000N0HH457F J2 1040 1154 J4 1120 1243 CXA1510-0000000N0HJ457F G2 780 866 CXA1510-0000000N0UG257F G4 840 932 H2 900 999 Group Order Code Group Order Code Group CXA1510-0000000N00H465F 65F 6500 K 80 70 5700 K 80 90 --- 75 --- 95 Order Code 65F 57F 57F 57F CXA1510-0000000N00J265F CXA1510-0000000N0HJ265F CXA1510-0000000N00J257F CXA1510-0000000N0HJ257F CXA1510-0000000N0UG457F CXA1510-0000000N0UH257F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® CXA1510 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C) - Continued Nominal CCT CRI Min 70 5000 K 80 90 70 4000 K 80 90 Minimum Luminous Flux Typ 75 --- 95 75 --- 95 2-Step 3-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1076 J2 1040 1154 J4 1120 1243 CXA1510-0000000N00J450H H4 970 1076 CXA1510-0000000N0HH450H J2 1040 1154 J4 1120 1243 CXA1510-0000000N0HJ450H CXA1510-0000000N0HJ450G CXA1510-0000000N0HJ450F G2 780 866 CXA1510-0000000N0UG250H CXA1510-0000000N0UG250G CXA1510-0000000N0UG250F G4 840 932 H2 900 999 CXA1510-0000000N0UH250H H4 970 1076 CXA1510-0000000N00H440H J2 1040 1154 J4 1120 1243 CXA1510-0000000N00J440H H4 970 1076 CXA1510-0000000N0HH440H J2 1040 1154 J4 1120 1243 CXA1510-0000000N0HJ440H CXA1510-0000000N0HJ440G CXA1510-0000000N0HJ440F G2 780 866 CXA1510-0000000N0UG240H CXA1510-0000000N0UG240G CXA1510-0000000N0UG240F G4 840 932 H2 900 999 Group Order Code Group Order Code Group CXA1510-0000000N00H450H 50H 50H 50H 40H 40H 40H CXA1510-0000000N00H450F CXA1510-0000000N00J250H CXA1510-0000000N0HJ250H CXA1510-0000000N0UG450H 50F CXA1510-0000000N0UG440H CXA1510-0000000N0UH240H CXA1510-0000000N00J250F CXA1510-0000000N00J450F CXA1510-0000000N0HH450G 50G 50G CXA1510-0000000N0HJ250G CXA1510-0000000N0UG450G CXA1510-0000000N0HH450F 50H 50F CXA1510-0000000N0UH250G CXA1510-0000000N0HJ250F CXA1510-0000000N0UG450F CXA1510-0000000N0UH250F CXA1510-0000000N00H440F CXA1510-0000000N00J240H CXA1510-0000000N0HJ240H Order Code 40F CXA1510-0000000N00J240F CXA1510-0000000N00J440F CXA1510-0000000N0HH440G 40G 40G CXA1510-0000000N0HJ240G CXA1510-0000000N0UG440G CXA1510-0000000N0UH240G CXA1510-0000000N0HH440F 40F 40F CXA1510-0000000N0HJ240F CXA1510-0000000N0UG440F CXA1510-0000000N0UH240F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® CXA1510 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C) - Continued Nominal CCT CRI Min 80 3500 K 90 93 80 3000 K 90 93 Minimum Luminous Flux Typ --- 95 95 --- 95 95 2-Step 3-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H2 900 999 H4 970 1076 J2 1040 1154 CXA1510-0000000N00J235H CXA1510-0000000N00J235G CXA1510-0000000N00J235F F2 680 755 CXA1510-0000000N0UF235H CXA1510-0000000N0UF235G CXA1510-0000000N0UF235F F4 730 810 G2 780 866 CXA1510-0000000N0UG235H CXA1510-0000000N0UG235G CXA1510-0000000N0UG235F F2 680 755 CXA1510-0000000N0YF235H CXA1510-0000000N0YF235G CXA1510-0000000N0YF235F F4 730 810 G2 780 866 CXA1510-0000000N0YG235H CXA1510-0000000N0YG235G CXA1510-0000000N0YG235F H2 900 999 CXA1510-0000000N00H230H CXA1510-0000000N00H230G CXA1510-0000000N00H230F H4 970 1076 J2 1040 1154 CXA1510-0000000N00J230H CXA1510-0000000N00J230G CXA1510-0000000N00J230F F2 680 755 CXA1510-0000000N0UF230H CXA1510-0000000N0UF230G CXA1510-0000000N0UF230F F4 730 810 G2 780 866 CXA1510-0000000N0UG230H CXA1510-0000000N0UG230G CXA1510-0000000N0UG230F F2 680 755 CXA1510-0000000N0YF230H CXA1510-0000000N0YF230G CXA1510-0000000N0YF230F F4 730 810 G2 780 866 Group Order Code Group CXA1510-0000000N00H235H 35H 35H 35H 30H 30H 30H CXA1510-0000000N00H435H CXA1510-0000000N0UF435H CXA1510-0000000N0YF435H CXA1510-0000000N00H430H CXA1510-0000000N0UF430H CXA1510-0000000N0YF430H CXA1510-0000000N0YG230H Order Code Group CXA1510-0000000N00H235G 35G 35G 35G 30G 30G 30G CXA1510-0000000N00H435G CXA1510-0000000N0UF435G CXA1510-0000000N0YF435G CXA1510-0000000N00H430G CXA1510-0000000N0UF430G CXA1510-0000000N0YF430G CXA1510-0000000N0YG230G Order Code CXA1510-0000000N00H235F 35F 35F 35F 30F 30F 30F CXA1510-0000000N00H435F CXA1510-0000000N0UF435F CXA1510-0000000N0YF435F CXA1510-0000000N00H430F CXA1510-0000000N0UF430F CXA1510-0000000N0YF430F CXA1510-0000000N0YG230F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® CXA1510 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C) - Continued Nominal CCT CRI Min 80 2700 K 90 93 Minimum Luminous Flux Typ --- 95 95 2-Step 3-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* G4 840 932 H2 900 999 H4 970 1076 CXA1510-0000000N00H427H CXA1510-0000000N00H427G CXA1510-0000000N00H427F E4 635 707 CXA1510-0000000N0UE427H CXA1510-0000000N0UE427G CXA1510-0000000N0UE427F F2 680 755 F4 730 810 CXA1510-0000000N0UF427H CXA1510-0000000N0UF427G CXA1510-0000000N0UF427F E4 635 707 CXA1510-0000000N0YE427H CXA1510-0000000N0YE427G CXA1510-0000000N0YE427F F2 680 755 F4 730 810 Group Order Code Group CXA1510-0000000N00G427H 27H 27H 27H CXA1510-0000000N00H227H CXA1510-0000000N0UF227H CXA1510-0000000N0YF227H CXA1510-0000000N0YF427H Order Code Group CXA1510-0000000N00G427G 27G 27G 27G CXA1510-0000000N00H227G CXA1510-0000000N0UF227G CXA1510-0000000N0YF227G CXA1510-0000000N0YF227G Order Code CXA1510-0000000N00G427F 27F 27F 27F CXA1510-0000000N00H227F CXA1510-0000000N0UF227F CXA1510-0000000N0YF227F CXA1510-0000000N0YF427F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® CXA1510 LED Flux Characteristics, ANSI White Order Codes and Bins - 36 V (If = 250 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1510 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 23). Nominal CCT CRI Min 70 Minimum Luminous Flux Typ 75 6500 K 80 70 5700 K 80 90 70 --- 75 --- 95 75 5000 K 80 4000 K 70 --- 75 Chromaticity Regions Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H4 970 1076 J2 1040 1154 J4 1120 1243 CXA1510-0000-000N00J40E1 H4 970 1076 CXA1510-0000-000N0HH40E1 J2 1040 1154 J4 1120 1243 CXA1510-0000-000N0HJ40E1 H4 970 1076 CXA1510-0000-000N00H40E2 J2 1040 1154 J4 1120 1243 CXA1510-0000-000N00J40E2 H4 970 1076 CXA1510-0000-000N0HH40E2 J2 1040 1154 J4 1120 1243 CXA1510-0000-000N0HJ40E2 G2 780 866 CXA1510-0000-000N0UG20E2 G4 840 932 CXA1510-0000-000N00H40E1 1A0, 1B0, 1C0, 1D0, 65F 1A0, 1B0, 1C0, 1D0, 65F 2A0, 2B0, 2C0, 2D0, 57F 2A0, 2B0, 2C0, 2D0, 57F 2A0, 2B0, 2C0, 1D0, 57F CXA1510-0000-000N00J20E1 CXA1510-0000-000N0HJ20E1 CXA1510-0000-000N00J20E2 CXA1510-0000-000N0HJ20E2 CXA1510-0000-000N0UG40E2 H2 900 999 CXA1510-0000-000N0UH20E2 H4 970 1076 CXA1510-0000-000N00H40E3 J2 1040 1154 J4 1120 1243 CXA1510-0000-000N00J40E3 H4 970 1076 CXA1510-0000-000N0HH40E3 J2 1040 1154 J4 1120 1243 CXA1510-0000-000N0HJ40E3 H4 970 1076 CXA1510-0000-000N00H40E5 J2 1040 1154 J4 1120 1243 3A0, 3B0, 3C0, 3D0, 50F 3A0, 3B0, 3C0, 3D0, 50F 5A0, 5B0, 5C0, 5D0, 40F CXA1510-0000-000N00J20E3 CXA1510-0000-000N0HJ20E3 CXA1510-0000-000N00J20E5 CXA1510-0000-000N00J40E5 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp CXA1510 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® CXA1510 LED Relative Spectral Power Distribution Relative Spectral Power Distribution The following graph is the result of a series of pulsed measurements at 500 mA for the 18-V CXA1510 LED and 250 mA for the 36-V CXA1510 LED and TJ = 85 °C. 100% Relative Spectral Power 90% 80% 70% 60% 5000 K, 70 CRI 50% 4000 K, 70 CRI 40% 3000 K, 80 CRI 30% 3000 K, 93 CRI 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® CXA1510 LED Electrical Characteristics The following graphs are the result of a series of steady-state measurements. 19.5 19.0 18 V Voltage (V) 18.5 18.0 Tc = 25 °C Tc = 55 °C 17.5 Tc = 85 °C 17.0 Tc = 105 °C 16.5 16.0 15.5 200 300 400 500 600 700 800 900 Current (mA) 39 38 36 V Voltage (V) 37 36 Tc = 25 °C Tc = 55 °C 35 Tc = 85 °C 34 Tc = 105 °C 33 32 31 100 150 200 250 300 350 400 450 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15 XLamp ® CXA1510 LED Relative Luminous Flux The relative luminous flux values provided below are the ratio of: • Measurements of CXA1510 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 500 mA at TJ = 85 °C. Using the 18-V CXA1510 LED as an example, at steady-state operation of Tc = 55 °C, IF = 600 mA, the relative luminous flux ratio is 120% in the chart below. A CXA1510 LED that measures 1120 lm during binning will deliver 1344 lm (1120 * 1.2) at steady-state operation of Tc = 55 °C, IF = 600 mA. 180% Relative Luminous Flux 160% 18 V 140% 120% Tc = 25 °C 100% Tc = 55 °C Tc = 85 °C 80% Tc = 105 °C 60% 40% 20% 0% 200 300 400 500 600 700 800 900 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® CXA1510 LED Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of: • Measurements of CXA1510 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 250 mA at TJ = 85 °C. Using the 36-V CXA1510 LED as an example,or example, at steady-state operation of Tc = 55 °C, IF = 300 mA, the relative luminous flux ratio is 120% in the chart below. A CXA1510 LED that measures 1120 lm during binning will deliver 1344 lm (1120 * 1.2) at steady-state operation of Tc = 55 °C, IF = 300 mA. 180% Relative Luminous Flux 160% 36 V 140% 120% Tc = 25 °C 100% Tc = 55 °C 80% Tc = 85 °C Tc = 105 °C 60% 40% 20% 0% 100 150 200 250 300 350 400 450 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® CXA1510 LED Far Field Typical Spatial Distribution 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle (º) Performance Groups - Brightness (18 V, If = 500 ma; 36 V, If = 250 ma, Tj = 85 °C) XLamp CXA1510 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux E4 635 680 F2 680 730 F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18 XLamp ® CXA1510 LED Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXA1510 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Code 50H 40H 35H 30H 27H CCT 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3844 0.3778 0.4030 0.3857 0.4061 0.3941 0.4132 0.3976 0.4099 0.3890 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060 EasyWhite Color Temperatures – 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle (°) 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 40G 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 Bin Code CCT 50G Center Point Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 19 XLamp ® CXA1510 LED Performance Groups - Chromaticity (Tj = 85 °C) - Continued EasyWhite Color Temperatures – 4-Step Code 65F 57F 50F 40F 35F 30F 27F CCT 6500 K 5700 K 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3097 0.3196 0.3079 0.3297 0.3164 0.3382 0.3176 0.3275 0.3253 0.3325 0.3249 0.3439 0.3331 0.3514 0.3330 0.3393 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4589 0.4021 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 20 XLamp ® CXA1510 LED Performance Groups - Chromaticity (Tj = 85 °C) - Continued ANSI White Bins Code Bin Code CCT 1A0 1B0 0E1 6500 K 1C0 1D0 ANSI White Bins x y 0.3048 0.3130 0.3144 0.3186 Code x y 0.3207 0.3215 0.3350 0.3290 0.3290 0.3417 0.3290 0.3300 2A0 0.3068 0.3113 0.3222 0.3243 0.3028 0.3304 0.3207 0.3462 0.3115 0.3391 0.3290 0.3538 0.3130 0.3290 0.3290 0.3417 0.3048 0.3207 0.3215 0.3350 0.3115 0.3391 0.3290 0.3538 0.3205 0.3481 0.3376 0.3616 0.3213 0.3373 0.3371 0.3490 0.3130 0.3290 0.3290 0.3417 0.3130 0.3290 0.3290 0.3417 0.3213 0.3373 0.3371 0.3490 0.3221 0.3261 0.3366 0.3369 0.3144 0.3186 0.3290 0.3300 2B0 0E2 5700 K 2C0 2D0 ANSI White Bins Code CCT Bin Code 3A0 3B0 0E3 5000 K 3C0 3D0 Bin Code CCT ANSI White Bins x y Code CCT Bin Code x y .3371 .3490 .3670 .3578 .3451 .3554 .3702 .3722 .3440 .3427 .3825 .3798 .3366 .3369 .3783 .3646 .3376 .3616 .3702 .3722 .3463 .3687 .3736 .3874 .3451 .3554 .3869 .3958 .3371 .3490 .3825 .3798 .3463 .3687 .3825 .3798 .3551 .3760 .3869 .3958 .3533 .3620 .4006 .4044 .3451 .3554 .3950 .3875 .3451 .3554 .3783 .3646 .3533 .3620 .3825 .3798 .3515 .3487 .3950 .3875 .3440 .3427 .3898 .3716 5A0 5B0 0E5 4000 K 5C0 5D0 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 21 XLamp ® CXA1510 LED Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.44 ANSI C78.377 Quadrangle 2700 K 3000 K EasyWhite 4-Step 0.43 EasyWhite 3-Step 0.42 EasyWhite 2-Step 3500 K 0.41 4000 K 0.40 4500 K CCy 0.39 5000 K 0.38 0.37 5700 K 0.36 6500 K 0.35 0.34 0.33 0.32 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.31 CCx Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.41 4000 K ANSI C78.377 Quadrangle 0.40 4500 K 5C 0.39 5D 0.37 CCy 5B 5000 K 0.38 5700 K 0.36 5A 3C 3B 6500 K 0.35 2B 0.34 1C 1B 0.33 3D 2C 1D 3A 2D 2A 1A 0.32 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.31 CCx Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 22 XLamp ® CXA1510 LED Bin and Order Code Formats Bin codes and order codes are configured as follows: Order CodeBin Code Series = CXA15 Series = CXA15 Internal code Chromaticity bin CRI Specification 0 = Standard CRI H = 80 min CRI U = 90 min CRI Y = 93 min CRI Vf class F0 = 18-V class N0 = 36-V class Internal code 6 SSSSSCC-HHHH-HHHGGRNNNNN 5 SSSSSCC-WWW-FF-GGR-AAAAA 4 Kit code Vf class F0 = 18-V class N0 = 36-V class D 3 CRI Specification B = 70 min CRI H = 80 min CRI U = 90 min CRI Y = 93 min CRI NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. Flux bin Performance class Performance class Mechanical Dimensions Dimensions are in mm. 15.85 ±0.2 Tolerances unless otherwise specified: +.13 x° +1° 1.3 C 2.6 Tc 3.3 1.15 ± .15 1.3 1.3 2.6 15.85 ±0.2 B 5.5 R .5 4X 8.9 ± 0.2 10.5 ±0.2 2.6 1.3 2.6 0.55 ± 0.1 TOLERA DIMENS .X ± .XX ± .XXX X° 1.3 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo isUNLESS a OTHERWISE SPEC A DIMENSIONS ARE IN trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. MILLIMETERS AND AFTER FI TOLERANCE UNLESS SPECI .XX ± . .XXX ± . X° ± . 23 THIRD ANGLE PROJECTION FOR SHEET METAL PARTS .X ± 1 XLamp ® CXA1510 LED Thermal Design The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXA LED is being operated within its designed limits. Please refer to page 3 for the Operating Limit specification. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from solder point (TSP) to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXA soldering recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXA LEDs successfully in luminaire designs. To keep the CXA1510 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following R_j-c R_j-c scale. Tc Tc As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim) R_tim graphs, depending on the operating environment. The y‑axis in the graphs is a base 10 logarithmic R_c-a plus the thermal resistance of the heat sink (R_hs). R_hs CXA1510 - 18 V Ta Ta 100.00 18 V Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 200 300 400 500 600 700 800 900 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 24 XLamp ® CXA1510 LED CXA1510 - 36- V Thermal Design Continued 100.00 36 V Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 100 150 200 250 300 350 400 450 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 25 XLamp ® CXA1510 LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 26 XLamp ® CXA1510 LED Packaging 6 Cree CXA1510 LEDs are packaged in trays of 20. Five trays are4 sealed in an anti-static bag and placed inside a carton, for a total of 100 5 3 2 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. NOTICE ENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND AL INFORMATION OF CREE, INC. THIS PLOT COPIED, REPRODUCED OR DISCLOSED TO ANY ED PERSON WITHOUT THE WRITTEN CONSENT Dimensions are in inches. Tolerances: +.13 x° +1° 5.875 4 5 6 3 5 2 R .375 4 1 3 2 1 NOTICE ENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND L INFORMATION OF CREE, INC. THIS PLOT COPIED, REPRODUCED OR DISCLOSED TO ANY NSENT ED PERSON WITHOUT THE WRITTEN CONSENT 5.875 .875 5.875 R .375 R .375 5.875 .875 .875 5.875 LABEL WITH CREE BIN CODE, QUANTITY, LOT # PATENT LABEL IS LOCATED ON UNDERSIDE OF COVER PATENT LABEL ISBIN LOCATED LABEL WITH CREE CODE, QUANTITY, OF LOTCARTON # ON UNDERSIDE TH CREE BIN ANTITY, LOT # PATENT LABEL IS LOCATED ON UNDERSIDE .875 OF COVER BAG .38 .875 BAG .38 .875 BAG .38 LABEL WITH CREE BIN CODE, QUANTITY, LOT # L IS LOCATED IDE OF COVER LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: LABEL WITH CREE BIN CODE, QUANTITY, LOT # UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN THIRD ANGLE PROJECTION MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: LABEL WITH CREE BIN CODE, QUANTITY, LOT # THIRD ANGLE PROJECTION 6 5 6 WITH CREE BIN QUANTITY, LOT # 5 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. THIRD ANGLE PROJECTION 3.X ± .XX ± .XXX ± X° ± UNLESS OTHERWISE SPECIFIED 3 DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. ® ® notice. Cree , XLamp TOLERANCE UNLESS SPECIFIED:and .X ± .XX ± .XXX ± X° ± 0.1 .05 .005 1 ° DATE 0.1 .05 .005 1 ° FOR SHEET METAL PARTS ONLY .X ± .06 0.1 .05 .005 1 ° .06 .03 .010 2 ° DRAWN BY DATE DATE APPROVED DATE DATE FOR SHEET METAL PARTS ONLYDATE APPROVED .X ± .06 .XX ± .03 MATERIAL .XXX ± .010 X° ± 2 ° FOR SHEET METAL PARTS ONLY .X ± .XX ± .XXX ± X° ± 4 4 .X ± DRAWN BY .XX ± .XXX ± CHECK ± X° DRAWN BY CHECK TITLE CXA15 Phone (919) 361- Fax (919) 313-530 SIZE C CXA15XX_DATASHEET TITLE SCALE SIZE SCALE C 2 DATE APPROVED DATE CXA15XX_DATASHEET_BAG2013 0.500 SHEET OF 1 Drive 4600 Silicon Durham, N.C 27703 EasyWhite® are registered trademarks and the Cree logo is a Phone (919) 361-4770 Fax (919) 313-5303 TITLE CXA15XX_DATASHEET 27 MATERIAL SIZE FINAL PROTECTIVE FINISH CXA 0.500 DRAWING NO. 2 CHECK DRAW FINAL PROTECTIVE FINISH FINAL PROTECTIVE FINISH DATE 4600 Silicon Drive Durham, N.C 277 MATERIAL DRAWING NO. CXA15XX_DATASHEET_BAG2013