SURFACE MOUNT MICROPROCESSOR CRYSTAL SERIES R2016 FEATURES COMPACT DESIGN HIGH ACCURACY EXCELLENT FOR HIGH DENSITY SURFACE MOUNTING SPECIFICATIONS PARAMETER FREQUENCY RANGE VALUE 20.00 MHz TO 80.00 MHz (FUNDAMENTAL) ±50 PPM MAXIMUM (±10 PPM, ±20 PPM AND ±30 PPM**) ±50 PPM MAXIMUM (±10 PPM, ±20 PPM AND ±30 PPM**) -10ºC TO +60ºC, (-40°C TO +85°C**) -40ºC TO +85ºC SEE TABLE 1 8pF, 10pF, 12pF TO 22pF 5.0 pF MAXIMUM 100 µW MAX ±5 PPM MAXIMUM 75 cm DROP TEST IN 3 AXES ON TO A HARD SURFACE 260ºC FOR 10s MAXIMUM FREQUENCY TOLERANCE AT 25ºC FREQUENCY STABILITY OVER TEMPERATURE OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE EQUIVALENT SERIES RESISTANCE LOAD CAPACITANCE SHUNT CAPACITANCE DRIVE LEVEL SHOCK RESISTANCE REFLOW CONDITIONS ** Available in some cases (FREQUENCY DEPENDENT). TABLE 1 MODE FUND FUND FREQUENCY (MHz) 20.00 TO 39.9 40.00 TO 80.00 MAXIMUM ESR (OHMS) 180 60 OUTLINE DRAWING SOLDER REFLOW PROFILE 2.0 ± 0.2 .079 ± .008 TOP VIEW 1.6 ± 0.2 .063 ± .008 GND 0.50 MAX .020 MAX MARKING AREA GND LAND PATTERN ...75 .030 ...55 .023 Scale none. Dimensions in mm inch 2.25 ± .05 .089 ± .002 1.5 DIA .06 DIA BOTTOM VIEW 4.0 .160 2.0 .079 PACKAGING 178 mm REEL DIAMETER 8 mm TAPE WIDTH, 4 mm PITCH QUANTITY: 1000 PIECES PER REEL 1.75 .069 0.55 .023 CARRIER TAPE DIMENSIONS 4.0 .160 1.85 ± .05 .073 ± .002 Direction of Feed PART NUMBERING SYSTEM HOLDER TYPE R2016 FREQUENCY - IN MHz LOAD CAPACITANCE - 10 TO 22 pF FOR PARALLEL PART NUMBER EXAMPLE: R2016-40.000-10-2050-TR TOLERANCE / STABILITY ±10/±10 : 1010 ±20/±20 : 2020 ±30/±30 : 3030 .25 ± .05 .010±.002 3.5 .138 8.0 ± 0.2 .315 ± .008 0.7 .028 .35 .65 .014 .026 0.65 .026 OPTION - TR TAPE AND REEL .65 ± 0.05 .026 ± .002