SYNCHRONOUS EQUIPMENT HIGH IN/OUTPUT FREQUENCY CLOCK/SYNCHRONIZER - SY02-HIPL Date: January 6, 2004 SY02-HIPL • INTRODUCTION The SY02-HIPL is a high frequency crystal-based PLL synchronizer designed as a module level subsystem for easy incorporation into telecommunication equipment. • FEATURES - Low jitter output from intrinsically low jitter VCXO or VCSO; - One references LVEPECL input up to 800MHz (pre-select frequency value –upon order) - One high frequency LVPECL output up to 800MHz with E/D function (pre-select frequency value –upon order) - Alarms and status; - Provides free running clock output; - The unit changes timing modes in response to external events; - J-TAG service port for re-programming and servicing; - 3.3V DC power supply - Small dimensions: 0.96” x 1.050” • APPLICATIONS - ATM - SDH - PDH - SONET - Other telecommunication equipment. th RALTRON ELECTRONICS CORP. 10651 N.W.19 St Florida 33172 U.S.A. Tel: 305 593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http:/www.raltron.com SYNCHRONOUS EQUIPMENT HIGH IN/OUTPUT FREQUENCY CLOCK/SYNCHRONIZER - SY02-HIPL ALARM FRS REF IN FR MUX, FPD, Counters & Logic OUT LOOP FILTER VCXO OUT EN OUT J-TAG PORT • DESCRIPTION The SY02-HIPL is a High Frequency Phase Lock Loop has been designed as a module level subsystem for easy incorporation into telecommunication equipment. The module generates the high frequency (up to 622.08MHz) output from a low jitter VCXO (Crystal Based Oscillator) or VCSO (SAW based oscillators). The output can be disabled externally by setting OUTEN pin high. The SY02-HIPL can be locked to one reference input frequency of 155.52MHz. The module has fast locking time and tolerates reference inputs with different duty cycles. The loop bandwidth is optimized according to used VCXO and wanted output performance. The ALARM output signals monitor the status of the phase loop LOL (Loss of Lock) and LOR (Loss of Reference). If the reference REF IN is absent, the SY02-HIPL will automatically switch to free run mode and FRS output will indicate it. The SMD package dimensions are 0.96x1.050 inch and power supply is 3.3V. - OUTPUT PROGRAMMING OUTEN 0 1 0 FR 0 X 1 OUTPUT Locked to Reference Output Disabled Free-Run - ALARM STATES LOL 0 1 0 LOR 0 0 1 ALARM No alarm 1 1 th RALTRON ELECTRONICS CORP. 10651 N.W.19 St Florida 33172 U.S.A. Tel: 305 593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http:/www.raltron.com SYNCHRONOUS EQUIPMENT HIGH IN/OUTPUT FREQUENCY CLOCK/SYNCHRONIZER - SY02-HIPL • PIN DESCRIPTION Name Signal Technology Description VL Typ DC 0 0.15 0.3 VH/ DC Voltage Min 2.97 ----- ----- ----- ---- ------ ------ ------ ----- ----- ----- ---- ------ ------ ------ Vcc-1.680 Vcc-1.620 Vcc-1.560 Vcc-1.085 Vcc-1.025 Vcc-0.885 DC 0 0.15 0.3 2.97 3.3 3.465 DC 0 0.15 0.3 2.97 3.3 3.465 Min 1 ENABLE 2 3 4 5 TCK TDO REFA IN SEL 6 RESET 7 8 9 REFB IN GND FRS 10 11 12 Vcc NC ALARM 13 FR 14 15 16 17 18 TDI TMS OUT GND OUT • Output Enable - > the input pin to enable the output, active low J-TAG port for factory usage – TCK J-TAG port for factory usage – TDO Reference A Input -> Reference A input signal Select Input Reference -> input to select A (SEL=0) or B (SEL=1) Reset input -> Reset active high In normal operation must be Grounded Reference B Input -> Reference B input signal Ground Free-Run Status -> Output indicates that the module is in free run, active high Positive supply voltage Not Connected Alarm out -> Alarm output indicates loss of reference or loss of lock – High when the unit is Unlocked Free-Run -> Control input to select free run of the module, active high J-TAG port for factory usage – TDI J-TAG port for factory usage – TMS Oscillator Output -> Output of the module Ground Complimentary Output LV/PECL LV/PECL Max 3.3 Typ Max 3.465 Vcc-1.680 Vcc-1.620 Vcc-1.560 Vcc-1.085 Vcc-1.025 Vcc-0.885 ----- ----- ----- ---- ------ ------ ------ DC 0 0.15 0.3 2.97 3.3 3.465 DC ----- ----- ----- 3.135 3.3 3.465 ----- ----- ----- ---- ------ ------ ------ DC 0 0.15 0.3 2.97 3.3 3.465 DC 0 0.15 0.3 2.97 3.3 3.465 ----- ----- ----- ---- ------ ------ ------ ----- ----- ----- ---- ------ ------ ------ Vcc-1.680 Vcc-1.620 Vcc-1.560 Vcc-1.085 Vcc-1.025 Vcc-0.885 ----- ----- ---- ------ ------ ------ Vcc-1.680 Vcc-1.620 Vcc-1.560 Vcc-1.085 Vcc-1.025 Vcc-0.885 LV/PECL ----LV/PECL ORDERING INFORMATION o Input/Output Frequencies available; Frequency Suffix 19.440MHz O1** 20.000MHz M1** 20.1416MHz A3** 20.4800MHz A4** 22.2171MHz A5** 26.0000MHz G3** 27.0000MHz A6** 29.4912MHz A7** 32.768MHz E5** 34.560MHz A8** 37.0560MHz A9** 38.880MHz O2** 44.4343MHz B1** 44.7360MHz T3** 51.8400MHz D2** 61.4400MHz U1** 62.5000MHz G5** 65.5360MHz B2** 77.7600MHz O3 78.125MHz B3 78.6432MHz B4 82.9440MHz B5 92.6000MHz U3 100.000MHz B6 ** Signifies an Input Frequency Only Frequency 112.000MHz 114.000MHz 125.000MHz 133.000MHz 139.264MHz 155.520MHz 156.250MHz 161.1328MHz 166.6286MHz 167.3316MHz 168.0407MHz 175.0000MHz 178.9440MHz 184.3200MHz 311.0400MHz 622.0800MHz 625.000MHz 644.5312MHz 666.5143MHz 669.1281MHz 669.3266MHz 690.5692MHz 710.9486MHz 719.7344MHz Suffix B7 B8 G2 G4 E6 O4 G6 B9 B10 C1 C2 C3 C4 C5 O6 O7 C8 C9 C10 F1 F2 F3 F4 F5 th Frequency 777.6000MHz Suffix F6 RALTRON ELECTRONICS CORP. 10651 N.W.19 St Florida 33172 U.S.A. Tel: 305 593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http:/www.raltron.com SYNCHRONOUS EQUIPMENT HIGH IN/OUTPUT FREQUENCY CLOCK/SYNCHRONIZER - SY02-HIPL P/N System SY02-HIPL – < Input Frequency> - <Output Frequency>-S- <Temp. Range>- <Cover Option> See above Chart If not listed Place NL and state the Freq.) See above Chart (If Output Freq. Not applied place NA and state the Freq.) Supply Voltage; 4 – 3.3V Operating Temperature Range; C - 0°C to 70°C I -40°C to +85°C Cover Option; M – Metal Cover N - Non Covered unit • SPECIFICATION General Specifications Mechanical Power Environment Input Signals Output Signals Signal Quality Performance Internal Oscillators Number of Reference Inputs Input reference frequency Signal Level Number of Outputs Output 1 Output 1 Signal Level Duty Cycle Tracking/Capture Range Free Run stability Jitter generation Jitter attenuation Jitter tolerance 0.96” x 1.050” SMT Module FR4 18 pins dual-in-line 3.3VDC, <200mA Operating Temperature Humidity VCXO or VCSO 1 See above table LVPECL 1 See above table LVPECL (W/ Complimentary option) 50+/-10% ±50ppm APR min ±30ppm (VCXO) ±150PPM(VCSO) <0.001UI RMS <0.001UI RMS <0.0001 UI RMS <0.0001 UI RMS -40dB -10dB 2 µs, 10 Hz (0.05 UI @ 8KHz) Regulated 0°C to 70°C 5% to 95% non-condensing Depend of the frequency th Voh; 2.272V min ; Vol; 1.68Vmax other frequency contact Raltron Voh; 2.272V min ; Vol; 1.68Vmax 50%+/-5% available upon request T=+25C; Vcc/load-=nominal HPF 30Hz HPF 500Hz HPF 12KHz HPF 100KHz Fj=10Hz~1KHz Fj=1KHz~10MHz RALTRON ELECTRONICS CORP. 10651 N.W.19 St Florida 33172 U.S.A. Tel: 305 593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http:/www.raltron.com SYNCHRONOUS EQUIPMENT HIGH IN/OUTPUT FREQUENCY CLOCK/SYNCHRONIZER - SY02-HIPL • OUTLINE DRAWING 1.040 (26.42 mm) 1.00 (25.40mm) .840 (21.34 mm) .960 (24.38mm) .100 (2.54mm) .800 (20.32 mm) .035 (.89 mm) .065 (1.65 mm) .100 (.2.54 mm) MARKING LABEL 1.050 (26.67mm) 18 1 10 9 PCB FOOTPRINT .416 MAX. (10.57mm MAX. .865 (21.97 mm) .019 (.48 mm) .100 (2.54 mm) TOP VIEW SIDE VIEW TABS FRONT VIEW • REFLOW PROFILE 250 200 150 XY (Scatter) 1 100 50 0 0 1 2 3 4 5 6 th 7 8 RALTRON ELECTRONICS CORP. 10651 N.W.19 St Florida 33172 U.S.A. Tel: 305 593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http:/www.raltron.com