LED15W SERIES - RSG Electronic Components GmbH

LED15W SERIES
15 WATTS
DC-DC CONVERTER
FEATURES
• 15 WATTS MAXIMUM OUTPU POWER
• SINGLE OUTPUT UP TO 4A
• SMALL SIZE AND LOW PROFILE 1.10 x 0.94 x 0.34 INCH
• HIGH EFFICIENCY UP TO 87%
• 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
• FIXED SWITCHING FREQUENCY
• INPUT TO OUTPUT ISOLATION: 2250VDC
• INDUSTRY STANDARD PIN-OUT FEC15 SERIES COMPATIBLE
• SURFACE-MOUNT OR THROUGH-HOLE
• SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER
PROCESS ACCORDING IPC J-STD-020D
• COST EFFICIENT OPEN FRAME DESIGN
• CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
• SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU
OPTIONS
:
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
Positive logic Remote On/Off, SMD type, Without TRIM pin, Without CTRL pin
DESCRIPTION
LED15W single output DC/DC converters provide up to 15 watts of output power in
an industry standard package and footprint. These units are specifically designed to
meet the power needs of low profile. All models feature with 4:1 ultra wide input
voltage of 9~36 VDC and 18~75 VDC, comprehensively protected against
over-current, over-voltage and input under-voltage protection conditions, and
trimmable output voltage.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
INPUT SPECIFICATIONS
OUTPUT SPECIFICATIONS
Output power
15 Watts Input voltage range
Voltage accuracy
± 1% Input surge voltage
24VDC nominal input
48VDC nominal input
24VDC input
48VDC input
9 ~ 36VDC
18 ~ 75VDC
50VDC 100ms ,max.
100VDC 100ms ,max.
Minimum load
0% Input reflected ripple
30mAp-p
current
±10%
Voltage adjustability (Note 6)
Nominal input and
Power up
30ms, max.
Start up time
30ms, max.
constant resistive load Remote ON/OFF
Line regulation
LL to HL at Full Load
± 0.2%
24VDC input
9VDC, max.
Start-up voltage
48VDC input
18VDC, max.
± 0.2%
Load regulation
No Load to Full Load
24VDC input
8VDC
Shutdown voltage
20MHz bandwidth
Ripple and noise
See table
48VDC input
16VDC
(Measured with a 1µF M/C and a 10µF T/C)
Remote ON/OFF (Note 7)
±0.02%/ ºC, max. Positive logic(Option)
Temperature coefficient
DC-DC ON
Open or 3 V < Vr < 15V
DC-DC OFF
Short or 0V < Vr < 1.2V
Transient response recovery time 25% load step change
250µs Negative logic(Standard) DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3V < Vr < 15V
3.3VDC output
3.7VDC~5.4VDC
Nominal input
-0.5mA~1.0mA
5VDC output
5.6VDC~7.0VDC Input current of remote control pin
Over voltage protection
13.8VDC~17.5VDC Remote off state input current
(Voltage clamped)
12VDC output
Nominal input
2.5 mA
16.8VDC~20.5VDC
15VDC output
Over load protection
% of FL at nominal input
Short circuit protection
150%
Continuous, automatics recovery
GENERAL SPECIFICATIONS
See table
Input to Output
Isolation resistance
Switching frequency
Design meets safety standard
Dimensions
2250 VDC, min. 1minute
500VDC
Isolation capacitance
Page 1 of 3
-40ºC ~ +85ºC (with derating)
Storage temperature range
-55ºC ~ +125ºC
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
9
10 ohms , min. Lead-free reflow solder process
1500pF, max. Moisture sensitivity level(MSL)
3.3VDC,5VDC
350kHz±10%
EMC CHARACTERISTICS
12VDC,15VDC
400kHz±10%
EN55022
IEC60950-1, UL60950-1, EN60950-1 EMI (Note 8)
EN61000-4-3
1.10 X 0.94 X 0.34 Inch Radiated immunity
(27.9 X 23.9 X 8.5 mm) Fast transient (Note 9) EN61000-4-4
Weight
MTBF (Note 1)
Operating ambient temperature
Thermal shock
Efficiency
Isolation voltage
ENVIRONMENTAL SPECIFICATIONS
10.5g(0.36oz)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
Surge (Note 9)
1.322x106hrs
5
5.147x10 hrs Conducted immunity
www.pduke.com
IPC J-STD-020D
IPC J-STD-033B level 2a
Class A, Class B
10 V/m
Perf. Criteria A
± 2kV
Perf. Criteria A
EN61000-4-5
± 1kV
Perf. Criteria A
EN61000-4-6
3 Vr.m.s
Perf. Criteria A
2013/5/3
LED15W SERIES
15 WATTS
Model
Number
Input
Range
Output
Voltage
LED15-24S3P3W
LED15-24S05W
LED15-24S12W
LED15-24S15W
LED15-48S3P3W
LED15-48S05W
LED15-48S12W
LED15-48S15W
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
Output Current
Min. Load
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
Full Load
4000mA
3000mA
1300mA
1000mA
4000mA
3000mA
1300mA
1000mA
DC-DC CONVERTER
(2)
Output
Ripple & Noise
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
(3)
(4)
Eff
Input Current (%)
No Load
60mA
70mA
10mA
10mA
40mA
40mA
10mA
10mA
85
87
86
86
85
87
86
86
(5)
Capacitor
Load max
12000µF
6000µF
1000µF
660µF
12000µF
6000µF
1000µF
660µF
Note
1.
BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC.
MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment)
2. Typical value at nominal input and full load. (20MHz BW.)
3. Typical value at nominal input and no load.
4. Typical value at nominal input and full load.
5. Test by minimum input and constant resistive load.
6. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor
between the TRIM pin and either the +OUTPUT pin or the - OUTPUT pin.
7. The CTRL pin voltage is reference to -INPUT. The order number please see product standard table.
8. The LED15W series standard module meets EN55022 Class A and Class B with external components.
For more detail information, please contact with P-DUKE.
9. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
LED15-48S05W Derating Curve
LED15-48S05W Efficiency VS Input Voltage
Page 2 of 3
LED15-48S05W Efficiency VS Output Current
www.pduke.com
2013/5/3
LED15W SERIES
15 WATTS
DC-DC CONVERTER
MECHANICAL DRAWING
DIP TYPE
SMD TYPE
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01(0.25)
3. Pin dimension tolerance ±0.004 (0.1)
PIN CONNECTION
PIN
1
2
3
4
5
6
LED15W SERIES
+ INPUT
- INPUT
CTRL
+OUTPUT
TRIM
-OUTPUT
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using
the method shown below.
TRIM UP
TRIM DOWN
6
5
RU
RD
5
4
PRODUCT STANDARD TABLE
Option
Negative remote ON/OFF with DIP(Standard)
Negative remote ON/OFF with SMT
Positive remote ON/OFF with DIP
Positive remote ON/OFF with SMT
DIP type without CTRL pin
SMT type without CTRL pin
DIP type, negative remote ON/OFF without TRIM pin
SMT type, negative remote ON/OFF without TRIM pin
DIP type without CTRL&TRIM pin
SMT type without CTRL&TRIM pin
DIP type, positive remote ON/OFF without TRIM pin
SMT type, positive remote ON/OFF without TRIM pin
Page 3 of 3
www.pduke.com
Suffix
-A
-B
-C
-D
-E
-F
-G
-H
-I
-J
-K
2013/5/3