SG24064WRM-EGAI04Q - Powertip Technology Corp.

TECH. CORP.
SPECIFICATIONS
CUSTOMER
:
TEMP1
SAMPLE
CODE
:
SG24064WRM-EGAI04Q
MASS PRODUCTION CODE
:
PG24064WRM-EGAI04Q
SAMPLE VERSION
:
02
SPECIFICATIONS EDITION
:
002
DRAWING NO.
(Ver.)
:
HLMD-PG24064WRM-EGAI04Q (Ver:001)
PACKAGING NO.
(Ver.)
:
HPKG-PG24064WRM-EGAI04Q (Ver:001)
Customer Approved
Date:
Approved
Checked
Designer
王剛,張慶源
詹漢華
楊興華,魏永超,周自立
POWERTIP
2008.12.24
HK RD APR
□
Preliminary specification for design input
■
Specification for sample approval
POWERTIP TECH. CORP.
Headquarters:
th
No.8, 6 Road, Taichung Industrial Park,
TEL: 886-4-2355-8168
E-mail: [email protected]
FAX: 886-4-2355-8166
Http://www.powertip.com.tw
Taichung, Taiwan
台中市 407 工業區六路 8 號
NO.PT-A-005-8
RECORDS OF REVISION
Date
(mm / dd / yyyy)
Ver. Edi.
Description
Page Design by
The sample has changed the IC,which was based on the Powertip's MASS
5/27/2008 01 001 PRODUCTION : PG24064WRM-ETIY8Q
12/23/2008 02 002 The sample has changed the B/L base on the previous sample
張恒
楊興華
Total:25 page
SG24064WRM-EGAI04Q
Page2
SAMPLE Ver.02
SPEC Edi.002
Contents
1. SPECIFICATIONS
1.1
1.2
1.3
1.4
1.5
1.6
Features
Mechanical Specifications
Absolute Maximum Ratings
DC Electrical Characteristics
Optical Characteristics
Backlight Characteristics
2. MODULE STRUCTURE
2.1 Counter Drawing
2.2 Interface Pin Description
2.3 Timing Characteristics
2.4 Display command
2.5 JUMPER
3. QUALITY ASSURANCE SYSTEM
3.1
3.2
Quality Assurance Flow Chart
Inspection Specification
4. RELIABILITY TEST
4.1
Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 Safety
5.2 Handling
5.3 Storage
5.4 Terms of Warranty
Appendix: 1. LCM Drawing
2. Packing Specification
SG24064WRM-EGAI04Q
Page3
SAMPLE Ver.02
SPEC Edi.002
1. SPECIFICATIONS
1.1 Features
Item
Standard Value
Display Type
240*64Characters
LCD Type
STN Blue Positive Transmissive Extended Temp.
Driver Condition
LCD Module:1/64 Duty,1/9 Bias
Viewing Direction
6 O’clock
Backlight
White LED B/L
Weight
173 g
Interface
8 bit parallel interface
Other(controller / driver IC)
SAP1024
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer web side :
http://www.powertip.com.tw/news/LatestNews.asp
1.2 Mechanical Specifications
Item
Standard Value
Unit
Outline Dimension
180.0 (L) *65.0 (w) * 14.8(H)(Max)
mm
Viewing Area
132.6.0(L) * 39.0(w)
mm
Active Area
127.16(L) * 33.88 (w)
mm
Dot Size
0.49 (L) * 0.49(w)
mm
Dot Pitch
0.53 (L) * 0.53 (w)
mm
Note:For detailed information please refer to LCM drawing
1.3
Absolute Maximum Ratings
Item
Symbol
Condition
Min.
Max.
Unit
Power Supply Voltage
VDD
-
-0.3
7.0
V
Input Voltage
VIN
-
-0.3
VDD+0.3
V
Operating Temperature
TOP
-
-20
70
℃
Storage Temperature
TST
-
-30
80
℃
Storage Humidity
HD
Ta<60 ℃
-
90
%RH
SG24064WRM-EGAI04Q
Page4
SAMPLE Ver.02
SPEC Edi.002
1.4
DC Electrical Characteristics
VDD =5.0 V ± 10%,VSS = 0V,Ta = 25℃
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
Logic Supply Voltage
Vdd
-
4.5
5.0
5.5
V
“H” Input Voltage
VIH
-
VDD-0.2
-
VDD
V
“L” Input Voltage
VIL
-
0
-
0.8
V
“H” Output Voltage
VOH
-
VDD-0.3
-
VDD
V
“L” Output Voltage
VOL
-
0
-
0.3
V
VDD=5.0V;VOP=12.7V;
Pattern= Full display
-
16.8
-
VDD=5.0V;VOP=12.7V;
Pattern= Horizontal line*1
-
17.0
30
-20℃
12.7
12.9
13.1
25℃
12.5
12.7
12.9
70℃
12.3
12.5
12.7
Supply Current
LCM Driver Voltage
Idd
VOP*2
mA
V
NOTE: *1 The Maximum current display;
*2 The VOP test point is VDD-VO.
SG24064WRM-EGAI04Q
Page5
SAMPLE Ver.02
SPEC Edi.002
1.5
Optical Characteristics
LCD Panel:1/64Duty,1/9Bias,VLCD =12.7V,Ta =25℃
Item
Symbol
Min.
Typ.
Max.
Unit
Reference
ms
Note2
Deg.
Notes 1
Note 3
Rise
tr
-
200
-
Fall
tf
-
150
-
Top
ΘY+
C>2.0,
-
-
40
Bottom
ΘY-
∅ = 270°
-
-
40
Left
ΘX-
-
-
45
Right
ΘX+
-
-
45
2.0
4.2
-
cd/m2
Response Time
Viewing angle
range
Conditions
θ = 0°,
∅ = 270°
Contrast Ratio
C
Average Brightness
(with LCD) *2
IV
60
72
-
CIE Color Coordinate
x
0.141
0.171
0.201
(With LCD)*2
y
0.064
0.094
0.124
Uniformity *1
△B
70
-
-
nm
Note 4
%
Note 4 :
1:△B=B(min) / B(max) * 100%
2:Measurement Condition for Optical Characteristics:
a:Environment: 25℃±5℃ / 60±20%R.H,no wind,dark room below 10 Lux at typical lamp
current and typical operating frequency.
b:Measurement Distance: 500 ± 50 ㎜ ,(θ= 0°)
c:Equipment: TOPCON BM-7 fast,(field 1°),after 10 minutes operation.
d:The uncertainty of the C.I.E coordinate measurement ±0.01,Average Brightness ± 4%
1
2
3
VIEW AREA
6
5
4
7
8
θθ
9
500 ㎜
LCM
Colorimeter=BM-7 fast
SG24064WRM-EGAI04Q
Page6
SAMPLE Ver.02
SPEC Edi.002
Note 1.
Optical characteristics-2
Viewing angle
Rear (12H)
φ=90°
Top (θ=0°)
θL
θR
θ+
θ-
Left (9H)
φ=180°
Right (3H)
φ =0°
Front (6H)
φ=270°
Viewing angle
SG24064WRM-EGAI04Q
Page7
SAMPLE Ver.02
SPEC Edi.002
Note 2.
Optical characteristics-3
Fig.2 Definition of response time
Positive Type
No selected waveform
No selected waveform
Selected waveform
Transmittance
10%
90%
100%
Tf
Tr
Negative Type
No selected waveform
No selected
Selected waveform
Transmittance
100%
90%
10%
Tr
SG24064WRM-EGAI04Q
Tf
Page8
SAMPLE Ver.02
SPEC Edi.002
Electrical characteristics-2
※2 Drive waveform
Vop: Drive voltage
1/B: Bias
N: Duty
fF: Frame frequency
fD: Drive frequency
(1) Selected waveform
1
2
3
N
1
3
2
V
Vop/B
Vop/B
V
1/fD
1/fF
(2) Non- Selected wave form
1
2
3
N
1
2
3
(1-2/B)Vop
Vop/B
Vop/
(1-2/B)Vop
1/fF
1/fD
Note:
Frame frequency is defined as follows: Common side supply
voltage peak - to - peak /2 = 1 period
SG24064WRM-EGAI04Q
Page9
SAMPLE Ver.02
SPEC Edi.002
Note 3. : Definition of Vth
Selected waveform
100
73%
Transmittanc
No selected waveform
50%
Vth1
Vth2
Drive
Active voltage range
View direction
Drive waveform
Transmittance
Vth1
10°
(Selected waveform)
50%
Vth2
40°
(No selected waveform)
73%
※1 Contrast ratio
= (Brightness in OFF state) / (Brightness in ON state)
Outline of Electro-Optical Characteristics Measuring System
Photo Detector
θ
Human
Active
Temperatur
e Control
Chamber
ψ
LCD Panel
Transmissive
Measuring System: Autronic DMS-803
SG24064WRM-EGAI04Q
Page10
SAMPLE Ver.02
SPEC Edi.002
1.6
Backlight Characteristics
LCD Module with LED Backlight
Maximum Ratings
Item
Symbol
Conditions
Min.
Max.
Unit
Forward Current
IF
Ta =25℃
-
90
mA
Reverse Voltage
VR
Ta =25℃
-
3.0
V
Reverse Current
IR
VR=3.0V
-
0.01
mA
Power Dissipation
PD
Ta =25℃
-
-
W
Item
Symbol
Conditions
Min.
Typ.
Max.
Unit
Forward Voltage
VF
-
3.6
4.2
V
Average Brightness
(without LCD)
IV
200
300
-
cd/m2
0.264
-
0.296
0.248
-
0.305
Electrical / Optical Characteristics
CIE Color Coordinate
(Without LCD)
X
Y
IF= 90 mA
IF= 90 mA
Color
SG24064WRM-EGAI04Q
-
white
Page11
SAMPLE Ver.02
SPEC Edi.002
2. MODULE STRUCTURE
2.1
Counter Drawing
2.1.1
LCM Mechanical Diagram
* See Appendix
2.1.2
Block Diagram
SG24064WRM-EGAI04Q
Page12
SAMPLE Ver.02
SPEC Edi.002
2.2 Interface Pin Description
Pin No.
Symbol
Function
1
FG
Frame ground (connected to metal bezel )
2
VSS
Power Supply (Vss=0)
3
VDD
Power Supply (VDD>VSS)
4
VO
Operating voltage for LCD
5
WR
Data write (write data to the module at "L")
6
RD
Data read (read data from the module at "L")
7
CE
Chip enable for the module (active at "L")
WR ="L";C/ D = "H" :command write,C/ D ="L":data write
8
C/ D
R D ="L";C/ D = "H" :command read, C/ D ="L":data read
9
VEE
10
RESET
11~18
DB0
Data bus (DB0=LSB)
12
DB1
Data bus
13
DB2
Data bus
14
DB3
Data bus
15
DB4
Data bus
16
DB5
Data bus
17
DB6
Data bus
18
DB7
Data bus (DB7=MSB)
19
FS
20
N/A
SG24064WRM-EGAI04Q
Negative voltage output
Controller reset (module reset)
Font select :connect to VDD : 6*8 Dots font
connect to VSS : 8*8 Dots font
Not connection
Page13
SAMPLE Ver.02
SPEC Edi.002
Contrast Adjust
VDD
3
VO
10~20KΩ
4
LCD MODULE
VEE
9
A
K
3.6 V
SG24064WRM-EGAI04Q
Page14
SAMPLE Ver.02
SPEC Edi.002
2.3 Timing Characteristics
Bus Timing
VDD =5.0V±0.5V, VSS =0V, Ta=25℃
SG24064WRM-EGAI04Q
Page15
SAMPLE Ver.02
SPEC Edi.002
2.4
Display command
2.5 JUMPER
JEA/JEK/JP2(2.3)/JA2/JF1/JR/JM5/JF4﹕SHORT﹔
OTHERS﹕OPEN
SG24064WRM-EGAI04Q
Page16
SAMPLE Ver.02
SPEC Edi.002
3. QUALITY ASSURANCE SYSTEM
3.1
Quality Assurance Flow Chart
Item
Customer
Sales
Info
Marketing
&
Design
R&D
Manufactur
ing
Q.A
Product
control
Purchase
Inventory
control
Survey
Request
Project
Inquiry
evaluation
Project Validation
NG
OK
Quote
Contract
Design check
Sample test
Sample
Approval
NG
Verification
NG
OK
Sample approval
OK
Pilot
Pilot
Run
&
Mass
Product
NG
Verification
OK
Specification preparation
Mass production
OK
Ship
Out
SG24064WRM-EGAI04Q
run & Reliability test
Inspection
NG
Shipment
Ship out
Page17
SAMPLE Ver.02
SPEC Edi.002
Item
Customer
Sales
Info
Claim
R&D
Q.A
Manufactu
ring
Product
control
Purchase
Inventory
control
Failure analysis
Sales
Service
Analysis report
Corrective action
Tracking
1. ISO 9001 Maintenance Activities
Q.A
3. Equipment calibration
Activity 5. Standardization Management
SG24064WRM-EGAI04Q
2. Process improvement proposal
4. Education And Training Activities
Page18
SAMPLE Ver.02
SPEC Edi.002
3.2 Inspection Specification
SG24064WRM-EGAI04Q
Page19
SAMPLE Ver.02
SPEC Edi.002
SG24064WRM-EGAI04Q
Page20
SAMPLE Ver.02
SPEC Edi.002
SG24064WRM-EGAI04Q
Page21
SAMPLE Ver.02
SPEC Edi.002
SG24064WRM-EGAI04Q
Page22
SAMPLE Ver.02
SPEC Edi.002
SG24064WRM-EGAI04Q
Page23
SAMPLE Ver.02
SPEC Edi.002
SG24064WRM-EGAI04Q
Page24
SAMPLE Ver.02
SPEC Edi.002
4. RELIABILITY TEST
4.1 Reliability Test Condition
NO.
1
2
3
4
TEST ITEM
TEST CONDITION
High Temperature Storage Test Keep in 80 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs
Low Temperature Storage Test Keep in -30 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs
Keep in +60℃/90%RH duration for 96 hrs
Surrounding temperature, then storage at normal condition 4hrs
(Excluding the polarizer)
High Humidity Storage
Air Discharge:
Contact Discharge:
Apply 2 KV with 5 times
Apply 250V with 5 times
Discharge for each polarity +/discharge for each polarity +/1. Temperature Ambient:15℃~35℃
2. Humidity relative:30%~60%
3. Energy Storage Capacitance(Cs+Cd):150pF±10%
ESD Test
4. Discharge Resistance(Rd):330Ω±10%
5. Discharge, mode of operation:
Single Discharge (time between successive discharges at least 1 s)
(Tolerance lf the output voltage indication: ±5%)
-20℃ → 25℃ → 70℃ → 25℃
5
Temperature Cycling Test
6
Vibration Test (Packaged)
(30mins) (5mins) (30mins) (5mins)
10 Cycle
Surrounding temperature, then storage at normal condition 4hrs
1. Sine wave 10~55HZ frequency (1 min)
2. The amplitude of vibration :1.5 mm
3. Each direction (XYZ) duration for 2 Hrs
Packing Weight (Kg)
0 ~ 45.4
7
Drop Test (Packaged)
Drop Height (cm)
122
45.4 ~ 90.8
76
90.8 ~ 454
61
Over 454
46
Drop direction :※3 comer /1 edges /6 sides etch 1times
SG24064WRM-EGAI04Q
Page25
SAMPLE Ver.02
SPEC Edi.002
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1
5.1.2
If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
Avoid any strong mechanical shock which can break the glass.
Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
Do not remove the panel or frame from the module.
The polarizing plate of the display is very fragile. So , please handle it very
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate.
Do not touch the display area with bare hands , this will stain the display area.
Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
a cleaning naphtha solvent.
To control temperature and time of soldering is 320±10℃and 3-5 sec.
To avoid liquid (include organic solvent) stained on LCM .
5.3 STORAGE
5.3.1
5.3.2
5.3.3
Store the panel or module in a dark place where the temperature is 25℃ ±5℃
and the humidity is below 65% RH.
Do not place the module near organics solvents or corrosive gases.
Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1
5.4.2
Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.
SG24064WRM-EGAI04Q
Page26
SAMPLE Ver.02
SPEC Edi.002