TECH. CORP. SPECIFICATIONS CUSTOMER : HCN040 SAMPLE CODE : SC1601LRS-AWA-B-Q MASS PRODUCTION CODE : PC1601LRS-AWA-B-Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 001 DRAWING NO. (Ver.) : JLMD-PC1601LRS-AWA-B-Q _001 PACKAGING NO. (Ver.) : JPKG -PC1601LRS-AWA-B-Q _001 Customer Approved POWERTIP 2013.07.29 Date: JS RD APPROVED □ ■ Approved Checked Designer 閆偉 Ryan 劉進 lori 李誠 Bruce Preliminary specification for design input Specification for sample approval POWERTIP TECH. CORP. Headquarters: No.8, 6th Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 RECORDS OF REVISION Date Ver. Edi. Description Page 02/20/2004 01 0 Revised Contents - 07/24/2004 01 A Update Weight and Outline Dimension 4 08/14/2007 01 B Update Timing Characteristics and Display Command 12,14 李遠東 07/25/2013 01 001 Update specification - 李誠 (mm / dd / yyyy) Design by Total：28 Pages PC1601LRS-AWA-B-Q Page2 SAMPLE Ver.01 SPEC Edi.001 Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 1.5 Optical Characteristics 1.6 Backlight Characteristics 2. MODULE STRUCTURE 2.1 2.2 2.3 2.4 2.5 Counter Drawing Interface Pin Description Timing Characteristics Display Command Character Pattern 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix: LCM Drawing Packaging Note：For detailed information please refer to IC data sheet：ST7066U PC1601LRS-AWA-B-Q Page3 SAMPLE Ver.01 SPEC Edi.001 1. SPECIFICATIONS 1.1 Features Item Standard Value Display Type 16*1 characters LCD Type Driver Condition STN,Gray, Transflective, Positive ,Normal Temp. LCD Module：1/16 Duty，1/4 Bias Viewing Direction 6 O’clock Backlight Yellow-Green LED B/L Weight 35.8g Interface - Other(controller / driver IC) ST7066U ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web site : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ 1.2 Mechanical Specifications Item Standard Value Unit Outline Dimension 80.0(L) * 36.0(w) * 14.0(H) mm Viewing Area 64.5(L) *13.8(w) mm Active Area 59.62(L) *6.56(w) mm Character Size 0.55(L) *0.75(w) mm Character Pitch 0.63(L) *0.83(w) mm Note：For detailed information please refer to LCM drawing 1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply Voltage VDD - -0.3 7.0 V LCD Driver Supply Voltage VLCD - VDD-10.0 VDD+0.3 V Input Voltage VIN - -0.3 VDD+0.3 V Operating Temperature TOP - 0 50 ℃ Storage Temperature TST - -20 70 ℃ Storage Humidity HD Ta＜40 ℃ - 90 %RH PC1601LRS-AWA-B-Q Page4 SAMPLE Ver.01 SPEC Edi.001 1.4 DC Electrical Characteristics VDD =5.0 ± 0.5V，VSS = 0V， Ta = 25℃ Item Symbol Condition Min. Typ. Max. Unit Logic Supply Voltage VDD - 4.5 5.0 5.5 V “H” Input Voltage VIH - 0.7 VDD - VDD V “L” Input Voltage VIL - -0.3 - 0.6 V “H” Output Voltage VOH IOH=-0.1mA 3.9 - VDD V “L” Output Voltage VOL IOL=+0.1mA - - 0.4 V Supply Current IDD *1 VDD=5.0V - 1.5 3.0 mA 0℃ - - - 25℃ 4.3 4.5 4.7 LCM Driver Voltage VOP*2 V 50℃ NOTE: *1 The Maximum current display *2 The VOP test point is VDD–V0 1.5 Optical Characteristics LCD Panel：1/16 Duty，1/4Bias，VLCD =4.5V，Ta =25℃ Item Symbol Min. Typ. Max. Rise tr - 150 - Fall tf - 300 - Top Θ+ C>2.0, 0 - 40 Bottom Θ- ∅ = 270° 0 - 40 Left ΘL 0 - 45 Right ΘR 0 - 45 5 7 - Response Time Viewing angle range Conditions Contrast Ratio PC1601LRS-AWA-B-Q C θ = 0°, ∅ = 270° Page5 Unit Reference ms Note2 Deg. Note 1 - Note 3 SAMPLE Ver.01 SPEC Edi.001 Note 1. Optical characteristics-2 Viewing angle Rear (12H) φ =90° Top (θ=0°) θL θR θ+ θ- Left (9H) φ =180° Right (3H) φ =0° Front (6H) φ =270° Viewing angle PC1601LRS-AWA-B-Q Page6 SAMPLE Ver.01 SPEC Edi.001 Note 2. Optical characteristics-3 Fig.2 Definition of response time Positive Type No selected waveform No selected waveform Selected waveform Transmittance 10% 90% 100% Tf Tr Negative Type No selected waveform No selected Selected waveform Transmittance 100% 90% 10% Tr PC1601LRS-AWA-B-Q Tf Page7 SAMPLE Ver.01 SPEC Edi.001 Electrical characteristics-2 ※2 Drive waveform Vop: Drive voltage 1/B: Bias N: Duty fF: Frame frequency fD: Drive frequency (1) Selected waveform 1 2 3 N 1 3 2 V Vop/B Vop/B V 1/fD 1/fF (2) Non- Selected wave form 1 2 3 N 1 2 3 (1-2/B)Vop Vop/B Vop/ (1-2/B)Vop 1/fD 1/fF Note: Frame frequency is defined as follows: Common side supply voltage peak - to - peak /2 = 1 period PC1601LRS-AWA-B-Q Page8 SAMPLE Ver.01 SPEC Edi.001 Note 3. : D efinition of Vth Selected waveform 1 00 73% Transm ittance No selected wav eform 50% Vth 1 Vth2 D rive Active v oltage range View direction Drive waveform T ransmittance Vth1 10 ° (S elected waveform) 50% Vth2 40 ° (No selected wav eform) 73% ※ 1 C ontrast ratio = (Brightness in OFF state) / (Brigh tness in ON state) Ou tlin e of Electro-Optical Characteristics M easurin g S ystem Ph oto D etector θ Hum an Active Temperatur e C on trol Chamber ψ LCD Panel Tran sm issive M easurin g System: Au tron ic D M S-80 3 PC1601LRS-AWA-B-Q Page9 SAMPLE Ver.01 SPEC Edi.001 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ - 720 mA Reverse Voltage VR Ta =25℃ - 10 V Power Dissipation PO Ta =25℃ - 1.104 W Electrical / Optical Characteristics Ta =25℃ Item Symbol Conditions Min. Typ. Max. Unit Forward Voltage VF IF= 120mA 3.9 4.2 4.6 V Reverse Current IR VR=10V - - 1 mA Average Brightness (without LCD) IV IF= 150mA 220 - - cd/m2 Wavelength Hue IF=150mA 569 - 576 nm Color PC1601LRS-AWA-B-Q Yellow-Green Page10 SAMPLE Ver.01 SPEC Edi.001 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PC1601LRS-AWA-B-Q Page11 SAMPLE Ver.01 SPEC Edi.001 2.2 Interface Pin Description Pin No. Symbol 1 VSS Power Supply (VSS=0) 2 VDD Power Supply (VDD>VSS) 3 VO Operating voltage for LCD. 4 RS Register Selection input。High = Data register ；Low = Instruction register (for write)。Busy flag address counter (for read) 5 6 Signal Description R/W Read/Write signal input is used to select the read / write mode High = Read mode, Low = Write mode E Start enable signal to read or write the data Four low order bi-directional three-state data bus lines. 7~10 DB0~DB3 Used for data transfer between the MPU and the LCD module. These four are not used during 4-bit operation. Four high order bi-directional three-state data bus lines. 11~14 DB4~DB7 Used for data transfer between the MPU and the LCD module. DB7 can be used as a busy flag. 15 A Power supply for LED backlight (+) 16 K Power supply for LED backlight (-) 2.2.1 Application Notes PC1601LRS-AWA-B-Q Page12 SAMPLE Ver.01 SPEC Edi.001 2.2.2 Refer Initial code void initial() { delay(40); write_com(0x3A); // function set: 8-bit operation & dual line delay(5); write_com(0x02); //display/cursor return home delay(5); write_com(0x0c); //display on (D = C = 1, B = 0) delay(5); write_com(0x06); //cursor shift right delay(5); write_com(0x01); // clear display delay(5); } PC1601LRS-AWA-B-Q Page13 SAMPLE Ver.01 SPEC Edi.001 2.3 Timing Characteristics PC1601LRS-AWA-B-Q Page14 SAMPLE Ver.01 SPEC Edi.001 PC1601LRS-AWA-B-Q Page15 SAMPLE Ver.01 SPEC Edi.001 For 4-bit interface date,only four bus lines (DB4 to DB7) are used for transfer. For 8-bitinterface date,all eight bus lines (DB0 to DB7) are used PC1601LRS-AWA-B-Q Page16 SAMPLE Ver.01 SPEC Edi.001 2.4 Display Command PC1601LRS-AWA-B-Q Page17 SAMPLE Ver.01 SPEC Edi.001 2.5 Character Pattern Note:This model is designed by 5x8.The 2 bottom columns does not exist in fact. PC1601LRS-AWA-B-Q Page18 SAMPLE Ver.01 SPEC Edi.001 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactur ing Q.A Product control Purchase Inventory control Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot run & Reliability test Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PC1601LRS-AWA-B-Q Inspection NG Shipment Ship out Page19 SAMPLE Ver.01 SPEC Edi.001 Item Customer Sales Info Claim R&D Q.A Manufactu ring Product control Purchase Inventory control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PC1601LRS-AWA-B-Q 2. Process improvement proposal 4. Education And Training Activities Page20 SAMPLE Ver.01 SPEC Edi.001 3.2 Inspection Specification PC1601LRS-AWA-B-Q Page21 SAMPLE Ver.01 SPEC Edi.001 PC1601LRS-AWA-B-Q Page22 SAMPLE Ver.01 SPEC Edi.001 PC1601LRS-AWA-B-Q Page23 SAMPLE Ver.01 SPEC Edi.001 PC1601LRS-AWA-B-Q Page24 SAMPLE Ver.01 SPEC Edi.001 PC1601LRS-AWA-B-Q Page25 SAMPLE Ver.01 SPEC Edi.001 PC1601LRS-AWA-B-Q Page26 SAMPLE Ver.01 SPEC Edi.001 4. RELIABILITY TEST (Ver.B01) 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test TEST CONDITION Keep in +70 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -20 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +40 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -20(min) → +25℃ → 70(max) → +25℃ (30mins) (5mins) (30mins) 10 Cycle (5mins) Surrounding temperature, then storage at normal condition 4hrs. 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃～35℃ 2. Humidity relative : 30%～60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10～55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PC1601LRS-AWA-B-Q Page27 SAMPLE Ver.01 SPEC Edi.001 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PC1601LRS-AWA-B-Q Page28 SAMPLE Ver.01 SPEC Edi.001