TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : PS320240T-009-I-02 MASS PRODUCTION CODE : PH320240T-009-I-Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 003 DRAWING NO. (Ver.) : LMD- PH320240T-009-I-Q (Ver:002) PACKAGING NO. (Ver.) : PKG- PH320240T-009-I-Q (Ver:001) Customer Approved Date: Approved Checked Designer 廖志豪 Rex Liao 張慶源 Yuan Chang 林榮鍾 Timter Lin POWERTIP 2010.12.21 □ Preliminary specification for design input ■ Specification for sample approval TW RD APR POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 05/07/2007 ─ 0 MASS PRODUCTION ─ Peter 06/22/2007 ─ A Modify B/L Connector number ─ Peter 6 9 Appendix Jared Appendix Timter 08/18/2008 01 001 1.Modify Average Brightness. 2.Modify Power Dissipation of B/L 3. Modify Backlight Tolerances. 02/03/2009 01 002 Modify LCD V.A. dim 01 Modify 1.5 Optical Characteristics Modify 3.2. Inspection Specification 003 Modify 4. RELIABILITY TEST Modify 5. PRECAUTION RELATING PRODUCT HANDLING 12/16/2010 6 19 26 27 Timter Total︰27 Page PH320240T-009-I-Q Page2 SAMPLE Ver.01 SPEC Edi.003 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 2.2 2.3 2.4 Counter Drawing Interface Pin Description Timing Characteristics JUMPER(Setting different use) 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：LCM Drawing Packaging Note : For detailed information please refer to IC data sheet : Primacy(TFT LCD): Himax: HX8218-A + HX8615A(Or compatible IC ) PH320240T-009-I-Q Page3 SAMPLE Ver.01 SPEC Edi.003 1. SPECIFICATIONS 1.1 Features Main LCD panel Item Standard Value Display Type 320(R、G、B) * 240 Dots LCD Type Normally white, Transmissive type Screen size (inch) 5.7 inch Viewing Direction 6 O’clock Color configuration RGB-Strip Backlight LED Interface Digital 24-bits RGB Other (controller/driver IC) 320(R、G、B) * 240 Dots ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side︰ http://www.powertip.com.tw/news.php?area_id_view=1085560481/ 1.2 Mechanical Specifications Item Standard Value Unit Outline Dimension 159.4 (W) * 111.0 (L) * 9.0 (H) mm Item Standard Value Unit Viewing Area 116.2 (W) * 87.4 (L) mm Active Area 115.2 (W) * 86.4 (L) mm LCD panel Note︰For detailed information please refer to LCM drawing PH320240T-009-I-Q Page4 SAMPLE Ver.01 SPEC Edi.003 1.3 Absolute Maximum Ratings Module 1.4 Item Symbol Condition Min. Max. Unit System Power Supply Voltage VDD AVSS=0 -0.3 7.0 V Input Voltage Vi — -0.3 VDD+0.3 V Operating Temperature TOP — -20 70 °C Storage Temperature TST — -30 80 °C DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Power Supply Voltage1 Supply Current Symbol Condition Min. Typ. VDD — 3.0 3.3 3.6 V VDD = 3.3 V Pattern=full display — 90 — mA VDD = 3.3 V Pattern= black *1 — 95 140 mA IDD Max. Unit Note1︰Maximum current display PH320240T-009-I-Q Page5 SAMPLE Ver.01 SPEC Edi.003 1.5 Optical Characteristics VDD= 3.3V, Ta=25°C TFT LCD Module Item Symbol Condition Min. Typ. Max. Tr Tf θY+ θYθXθX+ Ta = 25°C θX, θY = 0° — — — — — — 15 35 50 60 60 60 30 50 — — — — Ta = 25°C θX , θY = 0° — 150 250 — Note 3 X Y X Y X Y X Y Ta = 25°C θX , θY = 0° 0.277 0.289 0.579 0.311 0.299 0.524 0.093 0.040 0.327 0.339 0.629 0.361 0.349 0.574 0.143 0.090 0.377 0.389 0.679 0.411 0.399 0.624 0.193 0.140 — Note1 Average Brightness Pattern=white display (With B/L) IV IF=200mA 250 300 — Uniformity (With B/L) △B IF=200mA 70 — — Response time Viewing angle Rise Fall Top Bottom Left Right Contrast ratio CR White Color of CIE Coordinate （With B/L） Red Green Blue PH320240T-009-I-Q CR ≥ 10 Page6 Unit — ms Note 2 Deg. Note 4 cd/m2 Note1 % Note1 SAMPLE Ver.01 SPEC Edi.003 Note 1: *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1° by Topcon luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Normally White "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr PH320240T-009-I-Q Tf Page7 SAMPLE Ver.01 SPEC Edi.003 Normally Black "Black" "White" "Black" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θX = θY = 0 ° 12H Φ = 180 ° Φ = 270 ° θY - θY + θY + = 9 0 ° θX - = 9 0 ° Y+ X- θX θX + Φ= 90 ° Φ X+ Y6 H Φ= 0 ° θY - = 9 0 ° PH320240T-009-I-Q θX + = 9 0 ° Page8 SAMPLE Ver.01 SPEC Edi.003 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ — 200 mA Reverse Voltage VR Ta =25℃ — 10 V LED Power Dissipation PDLED — 0.12 W Power Dissipation PD — 2.4 W Ta =25℃ / 20mA Ta =25℃ Electrical / Optical Characteristics Item Symbol Forward Voltage VF Average Brightness (Without LCD) IF= 200 mA IV Color PH320240T-009-I-Q Conditions Min. Typ. Max. Unit 6.0 6.8 8.5 V 3800 4500 — cd/m2 White Page9 SAMPLE Ver.01 SPEC Edi.003 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH320240T-009-I-Q Page10 SAMPLE Ver.01 SPEC Edi.003 2.2 Interface Pin Description Pin No. Symbol 1 VDD 2 VDD 3 VDD 4 VDD 5 VSYNC Vertical sync input 6 ENB Data enable control 7 VSS Ground 8 DCLK 9 VSS 10 HSYNC 11 B7 data bit B7 12 B6 data bit B6 13 B5 data bit B5 14 B4 data bit B4 15 B3 data bit B3 16 B2 data bit B2 17 B1 data bit B1 18 B0 data bit B0 19 G7 data bit G7 20 G6 data bit G6 21 G5 data bit G5 22 G4 data bit G4 23 G3 data bit G3 24 G2 data bit G2 25 G1 data bit G1 26 G0 data bit G0 PH320240T-009-I-Q Function Analog power. Dot data clock Ground Horizontal sync input Page11 SAMPLE Ver.01 SPEC Edi.003 Interface Pin Description(CONT.) 27 R7 data bit R7 28 R6 data bit R6 29 R5 data bit R5 30 R4 data bit R4 31 R3 data bit R3 32 R2 data bit R2 33 R1 data bit R1 34 R0 data bit R0 35 VSS Ground 36 VSS Ground 37 NC No use. 38 NC No use. 39 NC No use. 40 NC No use. Backlight Pin Description 1 A 2 NC 3 K PH320240T-009-I-Q Power supply for LED Backlight anode input. No use. Power supply for LED Backlight cathode input. Page12 SAMPLE Ver.01 SPEC Edi.003 2.3 Timing Characteristics Signal Dclk Data Hsync Item Symbol Frequency Dclk 6.4 MHz High Time Tch 78 ns Low Time Tcl 78 ns Setup Time Tds 12 ns Hold Time Tdh 12 ns Period TH 408 DCLK Pulse Width Thp DCLK Back-Porch Thb 30 38 Display Period Thd 320 DCLK Front-Porch Thf 20 DCLK Period NTSC PAL Back-Porch Display Period Front-Porch 1 3 NTSC 5 TH TH 240 TH 4.5 Tvf PAL TH 23 Tvd Unit DCLK 15 Tvb PAL Max. 312.5 Tvp NTSC Typ. 262.5 Tv Pulse Width Vsync Min. TH 46.5 TCLK TCH TCL 2.64V DCLK 0.66V TDS TDH 2.64V DATA PH320240T-009-I-Q 0.66V Page13 SAMPLE Ver.01 SPEC Edi.003 DCLK DATA(R) Blacking Data R0 R1 R2 R3 R4 R5 DATA(G) Blacking Data G0 G1 G2 G3 G4 G5 Blacking Data B0 B1 B2 B3 B4 B5 DATA(B) ENB TV VSYNC TVP TVB TVD TVF HSYNC TH HSYNC TCLK THP DCLK THB DATA PH320240T-009-I-Q THD THF Valid Data Page14 SAMPLE Ver.01 SPEC Edi.003 Color Data Assignment PH320240T-009-I-Q Page15 SAMPLE Ver.01 SPEC Edi.003 2.4 JUMPER(Setting different use) (J1-1J2-2,J3-2,J4-1,J5-1,J6-2) PH320240T-009-I-Q Page16 SAMPLE Ver.01 SPEC Edi.003 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH320240T-009-I-Q run & Reliability test Inspection NG Shipment Ship out Page17 SAMPLE Ver.01 SPEC Edi.003 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH320240T-009-I-Q Page18 2. Process improvement proposal 4. Education And Training Activities SAMPLE Ver.01 SPEC Edi.003 3.2. Inspection Specification PH320240T-009-I-Q Page19 SAMPLE Ver.01 SPEC Edi.003 PH320240T-009-I-Q Page20 SAMPLE Ver.01 SPEC Edi.003 PH320240T-009-I-Q Page21 SAMPLE Ver.01 SPEC Edi.003 PH320240T-009-I-Q Page22 SAMPLE Ver.01 SPEC Edi.003 PH320240T-009-I-Q Page23 SAMPLE Ver.01 SPEC Edi.003 PH320240T-009-I-Q Page24 SAMPLE Ver.01 SPEC Edi.003 PH320240T-009-I-Q Page25 SAMPLE Ver.01 SPEC Edi.003 4. RELIABILITY TEST 4.1 Reliability Test Condition (Ver.B01) NO. TEST ITEM TEST CONDITION 1 High Temperature Storage Test 2 Low Temperature Storage Test Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in –30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ 4 → (30mins) Temperature Cycling Storage Test +25℃ → +80℃ → (5mins) (30mins) 10 Cycle +25℃ (5mins) Surrounding temperature, then storage at normal condition 4hrs. 5 ESD Test Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃∼35℃ 2. Humidity relative : 30%∼60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 6 Vibration Test (Packaged) 1. Sine wave 10∼55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm Each direction (X、Y、Z) duration for 2 Hrs 7 3. Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Test (Packaged) Drop Direction :※1 corner / 3 edges / 6 sides each 1time PH320240T-009-I-Q Page26 SAMPLE Ver.01 SPEC Edi.003 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH320240T-009-I-Q Page27 SAMPLE Ver.01 SPEC Edi.003