OBSOLETE PRODUCT

UNR Series
www.murata-ps.com
Single Output, Non-Isolated, 1.8/2.5/3.3VOUT 3.6-10W DC/DC Converters
OBSOLETE PRODUCT
PRODUCT OVERVIEW
Last time buy: 3 March 2014
UNR Series makes this power processing at the
Click here for more
information.
concluding
point of use a practical reality today.
Murata Power Solutions' 3.6-10W UNR Series
consists of non-isolated, 5V-to-1.8V (2A), 5V-to2.5V (2A), 5V-to-3.3V (3A), and 12V-to-3.3V (3A)
DC/DC converters in miniature surface-mount
and through-hole packages. The "gull-wing" SMT
packages (with metal shells and non-conductive
plastic baseplates) weigh a mere 17 grams and
can withstand lead temperatures up to +230°C.
They are compatible with virtually all contemporary
pick-and-place and solder-reflow processes.
FEATURES

Low cost! High reliability!

1" x 1" through-hole package or 1.01" x 1.01"
SMT package

Gull-wing leads; Standard reflow

Complete; No external components

Outputs: 1.8V/2A, 2.5V/2A, 3.3V/3A
The true benefits of distributed power will
ultimately be realized only when every low-voltage,
high-current CPLD, ASIC, DSP, etc. has its own
"power plant" right next to it. With isolated DC/
DC converters inevitably residing at the edges of
boards in proximity with backplanes and power
buses, the "on-board" proliferation of distributed
power will continue with more cost-effective,
non-isolated devices. The low-cost, easy-to-use
(no external components required), highly reliable
(100% fully automated SMT construction) 3.6-10W

Inputs: 4.75-5.5V, 10.8-13.6V

Guaranteed efficiencies to 87%

Output noise as low as 40mVp-p

Transient response as quick as 20µsec

–40 to +70°C operation with no derating

On/off control; EMC compliant

IEC950/EN60950/UL1950 approvals

Modifications and customs for OEM's
These versatile DC/DC's are fully line and load
regulated. They feature user-optional on/off control
(for power-sequencing requirements), output current limiting, and short-circuit protection (foldback
technique with auto-recovery). Additionally, the
12V-to-3.3V models offer input undervoltage
lockout (at 9.6V). Their impressive guaranteed
efficiencies enable all models to deliver their fully
rated output power from –40 to +65/70°C (ambient) without heat sinking or forced-air cooling.
If you've already considered and rejected the
use of inefficient, step-down, linear regulators,
take a look at one of these new switching buck
regulators. Their high efficiency, ease-of-use, longterm reliability, and overall cost effectiveness will
impress you. Safety agency approvals are currently
in progress.
+VOUT
+VIN
➁
OUTPUT
RETURN
INPUT
RETURN
➀
LOGIC
GROUND
CURRENT LIMITING
& S.C. SHUTDOWN
UNDERVOLTAGE
SHUTDOWN
ON/OFF
CONTROL
PWM
CONTROLLER
REFERENCE &
ERROR AMP
Figure 1. Simplified Schematic
Typical topology is shown.
➀ "D5" models do not have input undervoltage shutdown.
➁ "D5" models employ a more traditional buck-regulator design
in which this FET is replaced with a power Schottky diode.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_UNR 3.6-10W.C01 Page 1 of 8
UNR Series
Single Output, Non-Isolated, 1.8/2.5/3.3VOUT 3.6-10W DC/DC Converters
PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE
Part Number ➅
Vout (V)
Iout
(A)
UNR-1.8/2-D5
1.8
UNR-1.8/2-D5SM
UNR-2.5/2-D5
Power
Output
R/N (mVp-p) ➁ Regulation (Max.)
Input
Efficiency
Range
(V)
IIN ➃
(mA/A)
Min.
Typ.
Package
(Case
Pinout)
4.75-5.5
30/0.91
77%
79%
C7A, P9
C17, P24
VIN Nom.
(V)
Load ➂
(W)
Typ.
Max.
Line
2
3.6
35
50
±0.35%
1.8
2
3.6
35
50
±0.35%
±0.5%
5
4.75-5.5
30/0.91
77%
79%
2.5
2
5
40
80
±0.1%
±0.5%
5
4.75-5.5
200/5.62
85%
89%
C7A, P9
UNR-2.5/2-D5SM
2.5
2
5
40
80
±0.1%
±0.5%
5
4.75-5.5
200/5.62
85%
89%
C17, P24
UNR-3.3/3-D5
3.3
3
9.9
40
75
±0.4%
±0.5%
5
4.75-5.5
40/2.25
86%
88%
C7A, P9
UNR-3.3/3-D5SM
3.3
3
9.9
40
75
±0.4%
±0.5%
5
4.75-5.5
40/2.25
86%
88%
C17, P24
UNR-3.3/3-D12 ➁
3.3
3
9.9
100
150
±0.25%
±0.5%
12
10.8-13.6
40/0.93
87%
89%
C7A, P9
UNR-3.3/3-D12SM ➁
3.3
3
9.9
100
150
±0.25%
±0.5%
12
10.8-13.6
40/0.93
87%
89%
C17, P24
➀ Typical at TA = +25°C under nominal line voltage and full-load conditions, unless otherwise noted.
The UNR-1.8/2-D5 and D5SM models require an external 15k pull-up resistor between +Input
and On/Off Control for normal operation. See On/Off Control for details.
➁ Ripple/Noise (R/N) measured over a 20MHz bandwidth. The UNR-3.3/3-D12 and D12SM models
are specified with an external 22µF input capacitor. All other models are specified with no external
I/O capacitors. Output noise on the D12 models can be reduced significantly with the addition of
external output capacitors. See I/O Filtering.
±0.5%
5
➂ D5/D5SM models require a minimum 300mA load current to maintain regulation. D12/D12SM
models have no mimimum load requirement. Listed specs apply from 300mA to full load for D5/
D5SM models and from no load to full load for D12/D12SM models.
➃ Nominal line voltage, no-load/full-load conditions.
➄ D5/D5SM models may experience start-up problems if voltages greater than 1.0V (for 3.3V models)
or 1.2V (for 1.8/2.5V models) are present across the output pins during power-up.
➅ These are only partial part numbers. Refer to the part number structure when ordering.
PART NUMBER STRUCTURE
U NR - 2.5 / 2 - D5 SM - C
Output Configuration:
U = Unipolar
RoHS-6 compliant
(Does not claim EU RoHS
exemption 7b, lead in solder)
Non-Isolated
Surface-Mount Packaging
Nominal Output Voltage:
1.8, 2.5 or 3.3 Volts
Maximum Output Current
in Amps
Input Voltage Range:
D5 = 4.75-5.5 Volts (5V nominal)
D12 = 10.8-13.6 Volts (12V nominal)
www.murata-ps.com/support
MDC_UNR 3.6-10W.C01 Page 2 of 8
UNR Series
Single Output, Non-Isolated, 1.8/2.5/3.3VOUT 3.6-10W DC/DC Converters
MECHANICAL SPECIFICATIONS
THROUGH-HOLE MOUNT
SURFACE MOUNT
0.45 ±0.02
(11.43 ±0.51)
1.22
(30.99)
0.100
(2.54)
1.00 ±0.02
(25.40)
STANDOFFS
0.020
(0.51)
Case C7A
4
9
8
3
7
0.500
(12.70)
0.040 ±0.002 DIA.
(1.016 ±0.051)
0.20 MIN
(5.08)
0.800
(20.32)
2
0.300
(7.62)
6
5
1
TOP VIEW
0.10
(2.54)
0.800
(20.32)
1.01 ±0.02
4 EQ. SP.@ (25.65 ±0.51)
0.200 (5.08)
0.10
(2.54)
Case C17
0.100
(2.54)
3
0.400
(10.16)
1
4
2
1.01 ±0.02
(25.65 ±0.51)
0.800 1.00 ±0.02
(20.32) (25.40)
5
0.200
(5.08)
6
0.200
(5.08)
PLASTIC CASE WITH AN INSULATED BASE
INSULATED BASE
0.10
(2.54)
0.020
(0.51)
0.060
(1.52)
0.49 ±0.02
(12.45 ±0.51)
BOTTOM VIEW
0.110
(2.79)
METAL CASE
0.015
(0.38)
0.055
(1.40)
SEE SPECIAL SMT SOLDER INSTRUCTIONS ON PAGE 6
Dimensions are in inches (mm shown for ref. only).
INPUT/OUTPUT CONNECTIONS
Pin
Function P9
Function P24
1
Logic Ground
N.C.
2
On/Off Control
3
+Output
On/Off Control
4
Output Return
N.C.
Tolerances (unless otherwise specified):
.XX ± 0.02 (0.5)
.XXX ± 0.010 (0.25)
Angles ± 2˚
5
Input Return
+Output
6
+Input
N.C.
7
No Pin
Output Return
8
No Pin
Input Return
Components are shown for reference only.
9
No Pin
+Input
Third Angle Projection
Logic Ground
www.murata-ps.com/support
MDC_UNR 3.6-10W.C01 Page 3 of 8
UNR Series
Single Output, Non-Isolated, 1.8/2.5/3.3VOUT 3.6-10W DC/DC Converters
Performance/Functional Specifications
Typical @ TA = +25°C under nominal line voltage and full-load conditions with no external filtering.
Specifications apply to both surface-mount and through-hole models, unless noted. ➀ ➆
Input
Physical
Input Voltage Range:
D5 Models
D12 Models
4.75-5.5 Volts (5V nominal)
10.8-13.6 Volts (12V nominal)
Overvoltage Shutdown
None
Start-Up Threshold:
D12 Models ➁
10.2V typical, 10.8V maximum
Undervoltage Shutdown:
D12 Models ➁
9.6V typical, 8.2V minimum
Input Current:
Normal Operating Conditions
Standby Mode (Off or undervoltage):
1.8VOUT
2.5VOUT, 3.3VOUT D5 Models
3.3VOUT D12 Models
Output Short-Circuit Condition
20mA typical, 30mA maximum
11mA typical, 20mA maximum
5mA typical, 10mA maximum
50mArms
Input Ripple Current:
1.8VOUT, 3.3VOUT D12 Models
2.5VOUT, 3.3VOUT D5 Models
50mAp-p
150mAp-p
Input Filter Type
Capacitive
Reverse-Polarity Protection
None, install external fuse
On/Off Control ➂
TTL high (or open) = on, low = off
1.5V typical logic threshold
Dimensions:
Surface Mount Package
Through Hole Package
.
1.01"x1.01"x0.49" (25.65x25.65x12.45mm) nom.
1.00"x1.00"x0.45" (25.40x25.40x11.43mm) nom.
Shielding:
Surface Mount Package
Through Hole Package
5-sided
None
Case Connection (Surface Mount)
Input/output return
Case Material:
Surface Mount Package
Corrosion-resistant steel with
non-conductive, epoxy-based, black
enamel finish and plastic baseplate
Diallyl phthalate, UL94V-0 rated
See Ordering Guide
Output
VOUT Accuracy (50% load):
1.8VOUT Models
2.5VOUT Models
3.3VOUT D5 Models
3.3VOUT D12 Models
±1.75% (±32mV) maximum
±1.75% (±44mV) maximum
±1.5% (±50mV) maximum
±1% (±33mV) maximum
Temperature Coefficient
±0.02% per °C
Ripple/Noise (20MHz BW) ➃
See Ordering Guide
Line/Load Regulation
See Ordering Guide
Efficiency
See Ordering Guide
Current Limiting ➄
Auto-recovery
Through Hole Package
Pin or Lead Material:
Surface Mount
Through Hole
Tin plate over copper alloy
Gold plate over copper alloy
Weight
0.6 ounces (17 grams)
➀ D5 models require a minimum 300mA load current to maintain specified regulation. D12
models have no minimum load requirement. Operating D5 models under no-load conditions
will not damage these devices, however they may not meet all listed specifications. The UNR1.8/2-D5 and D5SM require an external 15 pull-up resistor between +Input and On/Off
Control for normal operation. See On/Off Control for details. The UNR-3.3/3-D12 and D12SM
are specifiied with an external 22µF input capacitor. See I/O Filtering for details.
➁ See Startup Threshold and Undervoltage Shutdown for details.
➂ See On/Off Control for details.
➃ The 22µF external input capacitor required for the UNR-3.3/3-D12 and D12SM should be
minimally rated for 1.5Arms ripple current and 125m ESR. Output noise for all models can
be further reduced with the installation of external output capacitors. See I/O Filtering for
details.
➄ Current limiting initiates at approximately 30% above rated load. Under short-circuit
conditions, output current folds back to approximately 150mA and input current drops to
approximtely 50mA. Both remain at those levels until the short is removed.
➅ See Start-Up Time for details.
➆ D5/D5SM models may experience start-up problems if voltages greater than 1.0V (for 3.3V
models) or 1.2V (for 1.8/2.5V models) are present across the output pins during power-up.
Dynamic Characteristics
Absolute Maximum Ratings
Transient Response (50% load step):
1.8VOUT Models
2.5VOUT, 3.3VOUT D12 Models
3.3VOUT D5 Models
20µsec to ±1% of final value
30µsec to ±1% of final value
40µsec to ±1% of final value
Start-Up Time: ➅ ➆
VIN to VOUT : D5 Models
D12 Models
On/Off to VOUT: D5 Models
D12 Models
100msec typical, 120msec maximum
13msec typical, 20msec maximum
60msec typical, 120msec maximum
13msec typical, 20msec maximum
Switching Frequency
200kHz (±30kHz)
Environmental
Operating Temperature (Ambient):
Without Derating
With Derating
–40 to +65/70°C
to +100°C (See Derating Curves)
Storage Temperature
–40 to +105°C
Flammability
UL 94V-0
Input Voltage:
Continuous:
D5 Models
D12 Models
Transient (100msec):
D5 Models
D12 Models
7 Volts
15 Volts
15 Volts
24 Volts
Input Reverse-Polarity Protection
None, install external fuse
Output Overvoltage Protection
None
Output Current
Current limited. Devices can
withstand a sustained output
short circuit without damage.
Storage Temperature
–40 to +105°C
Lead Temperature
Selective soldering (10 sec.)
Reflow soldering (75 sec.)
+300°C
+230°C
These are stress ratings. Exposure of devices to greater than any of these conditions may
adversely affect long-term reliability. Proper operation under conditions other than those
listed in the Performance/Functional Specifications Table is not implied.
www.murata-ps.com/support
MDC_UNR 3.6-10W.C01 Page 4 of 8
UNR Series
Single Output, Non-Isolated, 1.8/2.5/3.3VOUT 3.6-10W DC/DC Converters
Input Fusing
TEMPERATURE DERATING
Certain applications and/or safety agencies may require the installation
of fuses at the inputs of power conversion components. Fuses should also
be used if the possibility of sustained, non-current-limited, input-voltage
polarity reversals exists. For Murata Power Solutions UNR Series 3.6-10
Watt DC/DC Converters, you should use slow-blow type fuses with values
no greater than the following.
Model Number
Fuse Value
UNR-1.8/2-D5/-D5SM
1.5 Amps
UNR-2.5/2-D5/-D5SM
2 Amps
UNR-3.3/3-D5/-D5SM
3 Amps
UNR-3.3/3-D12/-D12SM
1.5 Amps
10
9
Output Power (Watts)
8
UNR-3.3/3-D5
UNR-3.3/3-D5SM
UNR-3.3/3-D12
UNR-3.3/3-D12SM
7
6
UNR-2.5/2-D5
UNR-2.5/2-D5SM
5
4
UNR-1.8/2-D5
UNR-1.8/2-D5SM
3
2
Start-Up Threshold and Undervoltage Shutdown
(UNR-3.3/3-D12 and D12SM only)
1
0
–40
0
40
45
50
55
60
65
70
75
80
85
90
95
100
Ambient Temperature (˚C)
TECHNICAL NOTES
I/O Filtering and Noise Reduction
All D5 models of UNR 3.6-10W Series DC/DC converters achieve their
rated ripple and noise specifications without the use of external input/
output capacitors. The UNR-3.3/3-D12 and D12SM models are tested and
specified with a single, external 22µF input capacitor (minimally rated for
1.5Arms ripple current and 120m ESR).
In critical applications, input/output ripple/noise may be further reduced
by installing additional external I/O caps. Input capacitors, which function
primarily as energy-storage elements, should be selected for bulk capacitance, low ESR and high rms-ripple-current ratings. Output capacitors,
which function more as true filter elements, should be selected for bulk
capacitance, low ESR, and appropriate frequency response. All caps should
have appropriate voltage ratings and be mounted as close to the converters as possible. Temperature variations for all parameters should obviously
be taken into consideration.
The most effective combination of external I/O capacitors will be a function of your line voltage and source impedance, as well as your particular
load and layout conditions. Our Applications Engineers will be happy to
recommend potential solutions and can discuss the possibility of our modifying a given device’s internal filtering to meet your specific requirements.
Return Current Paths
The Input Return, Output Return and Logic Ground are all connected to
each other internal to each device. To the extent possible, all load current
should be returned through the Output Return (via low-impedance runs)
and all input current returned through the Input Return. Any control signals
applied to the On/Off Control pin should be referenced to Logic Ground. The
internal trace leading to Logic Ground is not designed to carry high current.
Devices should never be installed in a manner that results in high current
flow through Logic Ground (i.e., the Input/Output Returns should never be
left open or attached via high-impedance connections).
Under normal start-up conditions, UNR-3.3/3-D12 and D12SM devices
will not begin to regulate until the ramping input voltage exceeds the StartUp Threshold Voltage (typically 10.2V). Once operating, devices will not turn
off until the input voltage drops below the Undervoltage Shutdown/Lockout
limit (typically 9.6V). Subsequent re-start will not occur until the input is
brought back up to the Start-Up Threshold. This built-in hysteresis obviously
avoids any indeterminate on/off conditions at a single voltage.
Start-Up Time
For the three D5 models (that do not have an input turn-on threshold),
the VIN to VOUT Start-Up Time is the interval between the time a step input
is applied to the device and the fully loaded output voltage enters and
remains within its specified accuracy band.
For the UNR-3.3/3-D12 and D12SM, VIN to VOUT Start-Up Time is the
interval between the time at which a rapidly ramping input voltage crosses
the turn-on threshold point and the fully loaded output voltage enters and
remains within its specified accuracy band. Actual measured times will vary
with input source impedance, external input capacitance, and the slew rate
and final value of the input voltage as it appears to the converter.
The On/Off to VOUT Start-Up Time assumes the converter is turned off via
the On/Off Control with the nominal input voltage already applied to the
converter. The specification defines the interval between the time at which
the converter is turned on and the fully loaded output voltage enters and
remains within its specified accuracy band.
Internal circuit design of the 3.3VOUT models mandates that no voltages
greater than 1.0V be present on the output pins at power-up. 1.8VOUT and
2.5VOUT models can not have voltages greater than 1.2V present on their
output pins at power-up. Failure to comply may result in start-up problems.
www.murata-ps.com/support
MDC_UNR 3.6-10W.C01 Page 5 of 8
UNR Series
Single Output, Non-Isolated, 1.8/2.5/3.3VOUT 3.6-10W DC/DC Converters
SMT Solder Process for SM models
On/Off Control
The On/Off Control pin may be used for remote on/off operation. UNR
3.6-10W Series converters are designed so that they are enabled when the
control pin is pulled high or left open (normal mode) and disabled when the
control pin is pulled low (to less than +0.8V relative to Logic Ground). As
shown in the figure and table below, each device has an internal pull-up
resistor on its On/Off Control pin whose value and voltage vary with model.
Dynamic control of the on/off function is best accomplished with a
mechanical relay or an open-collector/open-drain drive circuit (optically
isolated if appropriate). The drive circuit should obviously be able to sink
appropriate current when activated and withstand appropriate voltage when
deactivated.
Applying an external voltage to the On/Off Control when no input power
is applied to the converter can cause permanent damage to the converter.
The on/off control function, however, is designed such that the converter
can be disabled (pin 2/3 pulled low) while input power is ramping up and
then "released" once the input has stabilized. The time duration between the
point at which the converter is released and its fully loaded output voltage
settles to within specified accuracy can be found in the Performance/Functional Specifications Table.
CAUTION — Avoid Reflow Ovens
For the surface-mount "SM" models of the UNR Series, the packages’
gull-wing leads are made of tin-plated (150 microinches) copper. The
gull-wing configuration, as opposed to “J” leads, was selected to keep the
solder joints out from under the package to minimize both, heat conduction away from the leads (into the encapsulated package) and shadowing
effects.
"SM" modules do not currently withstand the standard solder-reflow process with its most common temperature profiles. In order to avoid damage
to the converter a selective solder process (i.e. hot air gun or a hand soldering method) with the following parameters must therefore be chosen :
Pre-heat phase 30-60°C rise/minute to 150°C maximum.
Lead temperature 300°C for 10 seconds maximum.
As shown in Figure 3, our tests have determined the optimal landing-pad
size to be 160 mils by 130 mils (4 x 3.3 mm).
VIP
0.015
(0.38)
+INPUT
REP
RIP
ON/OFF
CONTROL
0.130*
(3.30)
LOGIC GROUND
0.110**
(2.79)
0.100**
(2.54)
* PAD DIMENSION
** LEAD DIMENSION
0.160*
(4.06)
Figure 2. Driving the On/Off Control Pin
Figure 3. PC Board Land Pattern
Model
UNR-1.8/2-D5/-D5SM
UNR-2.5/2-D5/-D5SM
UNR-3.3/3-D5/-D5SM
UNR-3.3/3-D12/-D12SM
Internal
Pull-Up
Resistor (RIP)
External
Pull-Up
Resistor (REP)
Internal
Pull-Up
Voltage (VIP)
1k
1k
1k
10k
15k
N.A.
N.A.
N.A.
1.8V
2.5V
3.3V
VIN
www.murata-ps.com/support
MDC_UNR 3.6-10W.C01 Page 6 of 8
UNR Series
Single Output, Non-Isolated, 1.8/2.5/3.3VOUT 3.6-10W DC/DC Converters
TYPICAL PERFORMANCE CURVES
Efficiency vs. Output Current and Input Voltage
UNR-3.3/3-D5/-D5SM
(Guaranteed efficiency = 86% at VIN = 5V and IOUT = 3A)
UNR-1.8/2-D5/-D5SM
(Guaranteed efficiency = 77% at VIN = 5V and IOUT = 2A)
91
82
VIN = 4.75V
81
90
80
89
79
88
Efficiency (%)
Efficiency (%)
VIN = 5V
78
VIN = 4.5V
VIN = 5.5V
77
87
VIN = 5V
VIN = 5.5V
86
76
85
75
84
74
83
82
73
0.5
0.8
1.1
1.4
1.7
0.5
2
1
1.5
2
2.5
3
+3.3V Output Current (Amps)
+1.8V Output Current (Amps)
UNR-3.3/3-D12/-D12SM
(Guaranteed efficiency = 87% at VIN = 12V and IOUT = 3A)
UNR-2.5/2-D5/-D5SM
(Guaranteed efficiency = 83% at VIN = 5V and IOUT = 2A)
87
92
VIN = 4.75V
86
89
85
86
84
83
Efficiency (%)
Efficiency (%)
VIN = 10.4V
83
VIN = 5V
VIN = 5.5V
82
81
80
VIN = 13.6V
77
74
VIN = 12V
80
71
79
68
78
65
0.5
0.8
1.1
1.4
+2.5V Output Current (Amps)
1.7
2
0.5
1
1.5
2
2.5
3
+3.3V Output Current (Amps)
www.murata-ps.com/support
MDC_UNR 3.6-10W.C01 Page 7 of 8
UNR Series
Single Output, Non-Isolated, 1.8/2.5/3.3VOUT 3.6-10W DC/DC Converters
UNR-3.3/3-D5SM Radiated Emissions
FCC Part 15 Class B, 3 Meters
Converter Output = 3.3Vdc @ 2.7 Amps
CUSTOM CAPABILITIES
Our experienced applications and design staffs; quick-turn prototype capability; highly automated, SMT assembly facilities; and in-line SPC quality-control techniques combine to give us the unique ability to design and deliver any
quantity of power converters to the highest standards of quality and reliability.
We have compiled a large library of DC/DC designs that are currently used
in a variety of telecom, medical, computer, railway, aerospace and industrial
applications. We may already have the converter you need.
80
70
60
Radiated Emissions (dBµV/M)
Murata Power Solutions' world-class design, development and manufacturing team stands ready to work with you to deliver the exact power converter
you need for your demanding, large volume, OEM applications. And ... we’ll
do it on time and within budget!
FCC Class B Limit
50
40
30
20
10
0
Radiated Emissions
–10
Contact us. Our goal is to provide you the highest-quality, most cost-effective power converters available.
–20
100
UNR-3.3/3-D5SM Radiated Emissions
EN 55022 Class B, 10 Meters
Converter Output = 3.3Vdc @ 2.7 Amps
EMI Radiated Emissions
80
70
60
Radiated Emissions (dBµV/M)
If you’re designing with EMC in mind, please note that all of Murata Power
Solutions' 3.6-10 Watt UNR Series DC/DC Converters have been characterized
for radiated and conducted emissions in our new EMI/EMC laboratory. Testing
is conducted in an EMCO 5305 GTEM test cell utilizing EMCO automated EMC
test software. Radiated emissions are tested to the limits of FCC Part 15,
Class B and CISPR 22 (EN 55022), Class B. Correlation to other specifications
can be supplied upon request. Radiated emissions plots to FCC and CISPR 22
for model UNR-3.3/3-D5SM appear below.
1000
Frequency (MHz)
50
EN 55022 Class B Limit
40
30
20
10
0
Radiated Emissions
–10
–20
100
1000
Frequency (MHz)
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2013 Murata Power Solutions, Inc.
www.murata-ps.com/support
MDC_UNR 3.6-10W.C01 Page 8 of 8