Thermoelectric Cooling Solutions TO308.1MDL06035xx Performance Parameters Mounted TEC Type ΔTmax K Qmax W Imax A Umax V Rt K/W H mm 1MDL06-035-xx (n=35) 1MDL06-035-03 62 10.7 4.5 1.4 1MDL06-035-05 67 7.5 3.1 1.6 1MDL06-035-07 69 5.7 2.2 1MDL06-035-09 70 4.6 1.8 1MDL06-035-12 71 3.6 1.4 2.3 1MDL06-035-15 72 2.9 1.1 2.6 4.2 0.33 1.9 2.1 Performance data is specified at 300K, vacuum (TO-3 thermal resistance affect is included) Dimensions Manufacturing options A. Header material: CRS - Cold Rolled Steel D. TEC Ceramics Material: 1.Pure Al2O3(100%) - used by default 2.Alumina (Al2O3- 96%) F. Thermistor (optional) Can be mounted to cold side ceramics edge. 3.Aluminum Nitride (AlN) B. Header surface finish: Au plaiting (base and pins) G. Thermistor mounting: E. TEC Cold Side Finish: Epoxy gluing 1. Blank ceramics (not metallized) C. TEC to Header mounting: Solder 206 (Tmelt =206°C, Sn-Ag-In-Cu, flux-free process) 2. Metallized (Au plaiting) 3. Metallized and pre-tinned (various solder for pre-tinning available) H. Pinout configuration: the drawing contains standard pinout, can be revised by request) 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 1 of 9 Thermoelectric Cooling Solutions 1MDL06-035-03 Performance Data @ 27ºC, Vacuum ΔTmax K Qmax W Imax A Umax V @50ºC, N2 ΔTmax K Qmax W Imax A Umax V 1MDL06-035-03 62 10.7 4.5 4.2 1MDL06-035-03 67 11.6 4.5 4.7 Note: Performance data is specified at optimal heatsink. TO-3 Header thermal resistance is included into estimations. Use TECCad Software for estimations under different conditions or contact RMT Ltd or it’s branches directly. 1MDL06-035-05 Performance Data @ 27ºC, Vacuum ΔTmax K Qmax W Imax A Umax V @50ºC, N2 ΔTmax K Qmax W Imax A Umax V 1MDL06-035-05 67 7.5 3.1 4.2 1MDL06-035-05 72 8.1 3.1 4.7 Note: Performance data is specified at optimal heatsink. TO-3 Header thermal resistance is included into estimations. Use TECCad Software for estimations under different conditions. 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 2 of 9 Thermoelectric Cooling Solutions 1MDL06-035-07 Performance Data @ 27ºC, Vacuum ΔTmax K Qmax W Imax A Umax V @50ºC, N2 ΔTmax K Qmax W Imax A Umax V 1MDL06-035-07 69 5.7 2.2 4.2 1MDL06-035-07 74 6.2 2.2 4.7 Note: Performance data is specified at optimal heatsink. TO-3 Header thermal resistance is included into estimations. Use TECCad Software for estimations under different conditions or contact RMT Ltd or it’s branches directly. 1MDL06-035-09 Performance Data @ 27ºC, Vacuum ΔTmax K Qmax W Imax A Umax V @50ºC, N2 ΔTmax K Qmax W Imax A Umax V 1MDL06-035-09 70 4.61 1.8 4.2 1MDL06-035-09 75 5.02 1.8 4.7 Note: Performance data is specified at optimal heatsink. TO-3 Header thermal resistance is included into estimations. Use TECCad Software for estimations under different conditions. 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 3 of 9 Thermoelectric Cooling Solutions 1MDL06-035-12 Performance Data @ 27ºC, Vacuum ΔTmax K Qmax W Imax A Umax V @50ºC, N2 ΔTmax K Qmax W Imax A Umax V 1MDL06-035-12 71 3.6 1.4 4.2 1MDL06-035-12 76 3.9 1.4 4.7 Note: Performance data is specified at optimal heatsink. TO-3 Header thermal resistance is included into estimations. Use TECCad Software for estimations under different conditions or contact RMT Ltd or it’s branches directly. 1MDL06-035-15 Performance Data @ 27ºC, Vacuum ΔTmax K Qmax W Imax A Umax V @50ºC, N2 ΔTmax K Qmax W Imax A Umax V 1MDL06-035-15 72 2.92 1.1 4.2 1MDL06-035-15 76 3.19 1.1 4.7 Note: Performance data is specified at optimal heatsink. TO-3 Header thermal resistance is included into estimations. Use TECCad Software for estimations under different conditions. 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 4 of 9 Thermoelectric Cooling Solutions Application Tips 1. Never heat up the sub-assembly more than 200˚C. 2. Never use the sub-assembly without an attached heat sink. Header is NOT a heatsink by itself. 3. Connect TE cooler to DC power supply according to specified polarity. 4. Do not apply current/voltage higher than specified max values Mounting to TEC cold side Mounting to the cold side 1. Soldering of object to be cooled. Method suitable for a TE module with the metallized cold side (Ordering Options. Item E). Soldering requires careful TEC procedures: A. Never overheat TEC (Application Tips. Item 1). B. Use solder with melting point less than 200ºC. 2. Gluing of object to be cooled. Method available by glues with good thermoconductive properties. Not recommended for high vacuum applications and long operations at high temperature. TO-3 8pin header 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 5 of 9 Thermoelectric Cooling Solutions Sub-assembly Overview TO-3 8pin Header Thermistor ( optional) NTC type, 2.2kOhm or 10kOhm Thermoelectric Cooler 1MDL06-035-XX TEC to Header Mounting by hi-temp. soldering (Lead-Free Solder 206, Sn-Ag-In-Cu, Tmelt=206ºC) TE Cooler Internal Solder (Lead-Free Solder 230, Sn-Sb, Tmelt=230ºC) Flexible pinout for TEC and thermistor Header Pins with nailheads for WB Laser Labeling is available for TO-3 header (optional) CRS Material TO-3 8pin Header Drawing 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 6 of 9 Thermoelectric Cooling Solutions Additional Options for TEC TEC Polarity TEC Polarity can be modified by request. The specified polarity in this datasheet is typical. It can be reversed in accordance to Customer application requirements. - + + Standard polarity - Reversed polarity Terminal Wires Options The standard solution is with terminal wires. TEC can be modified for WB process by request. In this case terminal wires are not mounted, TEC has Au plated WB pads. Standard solution, terminal wires WB Solution, Au played WB pads Optimization for WB process In case of WB optimization, the standard WB solution is with WB pads (no posts) by default. WB posts are available by request. The dimensions of WB posts can be modified and optimized for Customers application. WB posts are made of Copper, Au plated. WB posts WB pads Customized Au Patterns Customized Au patterns on thermoelectric cooler cold side are available by request. Selective Pretinning over pattern is also available. Please, contact RMT Ltd for additional information about customized Au patterns requirements. Customized Au pattern on cold side Selective pre-tinning over pattern TEC Height modification Standard TEC height can be modified without performance changes by using ceramics of different thickness. Standard thermoelectric cooler height (specified in this datasheet) can be increased in a range 0.25..1.5 mm by request. Standard height M o d i fi e d h e i g h t , another ceramics thickness 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 7 of 9 Thermoelectric Cooling Solutions Contacts RMT Ltd. Headquarters Warshavskoe sh. 46, 115230, Moscow, Russia Phone: +7-499-678-2082 Fax: +7-499-678-2083 Web: www.rmtltd.ru Email: [email protected] EUROPE/USA - TEC Microsystems GmbH Schwarzschildstrasse 3, 12489 Berlin, Germany Tel. +49 30 6789 3314 Fax+49 30 6789 3315 Web: www.tec-microsystems.com Email: [email protected] CHINA - ProTEC Ltd. 深圳市南山区登良路恒裕中心B座207 ：+86-755-61596066 真：+86-755-61596036 ：518054 Web: www.protecltd.com Email: [email protected] 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 8 of 9 Thermoelectric Cooling Solutions Legal Notice All logos, images, trademarks and product names (collectively Materials) are proprietary to RMT Ltd and/ or any of its affiliates, or subsidiaries, or other respective owners that have granted RMT Ltd the permission and/or license to use such Materials. All images are provided by RMT Ltd. and are subjects of copyright protection. RMT Ltd, TEC Microsystems GmbH and ProTEC Ltd. do not grant a copyright license (express or implied) to the Recipient, except that Recipient may reproduce the logos, images and text materials in this press-release without any alteration for non-promotional or editorial purposes only with a written note about materials owner. Copyright protection warning Graphic materials and text from this datasheet may not be used commercially without a prior response in writing on company letterhead and signed by RMT Ltd authority. Thank you for respecting the intellectual property rights protected by the International Copyright laws. All Images contain RMT hidden watermark for the immediate proof of their origin. RMT Ltd. RMT Image Hidden Watermark 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2012. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 9 of 9