Certificate of Compliance Certificate: 70000993 Master Contract: 219759 Project: 70000993 Date Issued: June 4, 2013 Issued to: Convertec Limited Whitemill Industrial Estate Wexford, Wexford Ireland Attention: Michael Carey The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. Patric Charbonneau Issued by: Patric Charbonneau, P.T. PRODUCTS CLASS 5311 11 CLASS 5311 91 - POWER SUPPLIES - Component Type(CSA 60950-1-07-2nd Ed) - POWER SUPPLIES - Component Type(UL 60950-1-2nd Ed)Certified to U.S.Stds DIN Rail Switch Mode Power Supply for building-in, Trademarks: TRACO POWER or Convertec Power Electronics. Models and ratings as follows: TRACO CONVERTEC POWER INPUT OUTPUT POWER ELECTRONICS Voltage / Current model reference model reference (AC = 50/60Hz) TCL 060-112* INMI 012.040 100 – 240 Vac Voltage / Current / Power 12 Vdc / 4.0 A / 60 W OR 85 – 250 Vdc / TCL 060-124* DQD 507 Rev. 2012-05-22 INMI 024.025 1.4 – 0.8 A 100 – 240 Vac Page: 1 24 Vdc / 2.5 A / 60 W Certificate: 70000993 Master Contract: 219759 Project: 70000993 Date Issued: June 4, 2013 OR 85 – 250 Vdc / TCL 060-148* INMI 048.012 1.4 – 0.8 A 100 – 240 Vac 48 Vdc / 1.25 A / 60 W OR 85 – 250 Vdc / TCL 120-112* INMI 012.080 1.4 – 0.8 A 100 – 240 Vac 12 Vdc / 8.0 A / 96 W OR 85 – 250 Vdc / TCL 120-124* INMI 024.050 2.2 – 1.0 A 100 – 240 Vac 24 Vdc / 5.0 A / 120 W OR 85 – 250 Vdc / TCL12-124DC INMI 024.010.DC012 2.4 – 1.2 A 9.5 – 18 Vdc / 24 Vdc / 1.0 A / 24 W TCL24-105DC INMI 005.050DC024 2.5 A @ 12 Vdc 18 – 75 Vdc / 5 Vdc / 5.0 A / 25 W 1.3A @ 24 Vdc TCL24-112DC INMI 012.020DC024 0.7 A @ 48 Vdc 18 – 75 Vdc / 12 Vdc / 2.0 A / 24 W 1.3A @ 24 Vdc TCL24-124DC INMI 024.010DC024 0.7 A @ 48 Vdc 18 – 75 Vdc / 1.3A @ 24 Vdc 0.7 A @ 48 Vdc DQD 507 Rev. 2012-05-22 Page: 2 24 Vdc / 1.0 A / 24 W Certificate: 70000993 Master Contract: 219759 Project: 70000993 Date Issued: June 4, 2013 TCL 060-112DC INMI 012.050DC024 18 – 75 Vdc / 12 Vdc / 5.0 A / 60 W TCL 060-124DC INMI 024.025DC024 4.0 – 1.0 A 18 – 75 Vdc / 24 Vdc / 2.5 A / 60 W TCL-REM240 PARA INMI 024 4.0 – 1.0 A Vin1: 5 - 48 Vdc Vin2: 5 - 48 Vdc Vin-0.9 Vdc / 8.0 A / (see Notes) / (see Notes) * The models may be followed by an alphanumeric suffix: C – Spring clamp connector; H – Characteristics of the output voltage, achieved by resistor value change; CH – Spring clamp connector with characteristics of the output voltage, achieved by resistor value change. Notes: • The units have been evaluated as components where the suitability of the combination with the end product shall be evaluated. • The units are provided with terminals for permanent connection to the power source. • The DC units are not intended and have not been evaluated for direct connection to the DC Mains supply. • The AC units have been evaluated for direct connection to the AC Mains supply. • All models were evaluated as Class I (earthed) except model TCL-REM240 / PARA INMI 024 which is Class III. • Model TCL-REM240 / PARA INMI 024 is a distribution unit intended to be supplied by two (2) TCL24-105, TCL24-112, TCL24-124, TCL 060-112, TCL 060-124, TCL 060-148, TCL 120-112, TCL 120-124 or TCL240-124 CSA-certified power supplies. Therefore, its input current and output power ratings are dependent on the output of the power supplies used at input of the distribution unit. • The units have been evaluated for use in a Pollution Degree 2, Overvoltage Category II environment and at a maximum altitude of 2000m above sea level (ordinary dry locations). DQD 507 Rev. 2012-05-22 Page: 3 Certificate: 70000993 Master Contract: 219759 Project: 70000993 Date Issued: June 4, 2013 APPLICABLE REQUIREMENTS CAN/CSA-C22.2 No. 60950-1-07 + Am1:2011 – Information Technology Equipment – Safety – Part 1: General Requirements UL 60950-1, Second Edition + Am1:2011 Requirements DQD 507 Rev. 2012-05-22 – Information Technology Equipment – Safety – Part 1: General Page: 4 Certificate of Compliance Certificate: 1921571 Master Contract: 219759 Project: 1921571 Date Issued: 2007/09/28 Issued to: Convertec Limited Whitemill Industrial Estate Wexford, Wexford Ireland Attention: na The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' Issued by: Isabelle Maurice, Jr. Eng. Authorized by: Helene Vaillancourt, Operations Manager PRODUCTS CLASS 5311 03 CLASS 5311 07 CLASS 5311 87 CLASS 3211 87 - POWER SUPPLIES - Component Type - POWER SUPPLIES - Component Type - (CSA 60950-1-03) - POWER SUPPLIES - Component Type - Certified to US Stds. - (CSA 60950-1-03/UL 60950-1, First Edition, NRTL Program) - INDUSTRIAL CONTROL EQUIPMENT - Miscellaneous Apparatus Certified to US Standards !"# $ !"# % $& #!!" !'$ ( )*+"#*+, -!./!012 3 $& ' ( #!, 3 !4 $5* Notes(*): The 'C' and 'US' indicators adjacent to the CSA Mark signify that the product has been evaluated to the applicable CSA and ANSI/UL Standards, for use in Canada and the U.S., respectively. This 'US' indicator includes products eligible to bear the 'NRTL' indicator. NRTL, i.e. National Recognized Testing Laboratory, is a designation granted by the U.S. Occupational Safety and Health Administration (OSHA) to laboratories which have been recognized to perform certification to U.S. Standards. DQD 507 Rev. 2004-06-30 Supplement to Certificate of Compliance Certificate: Master Contract: 1921571 219759 The products listed, including the latest revision described below, are eligible to be marked in accordance with the referenced Certificate. Product Certification History Project Date Description 1921571 2007/09/28 CSA c/us certification of a Built In Switch Mode Power Supply, Model: TCL 240-124 and TCL 240-124C. Certificate: 1921571 Master Contract: 219759 Project: 1921571 Date Issued: 2007/09/28 • 6 $ $ 7 8$$ $ * $9 8$$ 9 7$ 7 " 8$$ * • $ 8$$ 7 $ $ $5 $ $7 9 : !* • , $7 ; $ $ < $ 7 8 = * • $ 7 7 $ 8 7& $ * BI-NAT CSA 60950-1-03/UL 60950-1, 1st Edition DESIGN MANUAL, Version 1.0 IS AN INTEGRAL PART OF THIS REPORT APPLICABLE REQUIREMENTS ,>.,"* >* /!?-!"#"!) " %9$ & ;= @ $9 @ $ # A $ = * ,"* >*#!B*#"!# " A $ 6 6 /!?-!"# C# ;D " %9$ & ;= @ $9 @ $ # A $ = * 6 -!+ C#B ; $ 8 E ## !!-D DQD 507 Rev. 2004-06-30 " %$ ;= * Certificate of Compliance Certificate: 1702103 Master Contract: 219759 Project: 1702103 Date Issued: 2005/08/11 Issued to: Convertec Limited Whitemill Industrial Estate Wexford, Wexford Ireland Attention: n/a The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' Issued by: Eric Fortier, Eng. Authorized by: Alain Ste-Marie, Operations Manager PRODUCTS CLASS 5311 07 CLASS 5311 87 - POWER SUPPLIES - Component Type - (CSA 60950-1-03) - POWER SUPPLIES - Component Type - Certified to US Stds. - (CSA 60950-1-03/UL 60950-1, First Edition, NRTL Program) • !"#$ %%&'#()* + , ** - $ * . (/012/ 3* #%%0!%3* /%45%6$- %2"%!7 !3 8 #3 9 %5"%17 /3 9 : . !3*- #7 !39 #3*- 7 #3 9 /3*- !7 /3 9 ;"7 ' '7 5%</%"#"%14= 5%</%"# # > >'? 7=7 ' 7 >?.7 &7. :@ 6' .>&:. The 'C' and 'US' indicators adjacent to the CSA Mark signify that the product has been evaluated to the applicable CSA and ANSI/UL Standards, for use in Canada and the U.S., respectively. This 'US' indicator includes products eligible to bear the 'NRTL' indicator. NRTL, i.e. National Recognized Testing Laboratory, is a designation granted by the U.S. Occupational Safety and Health Administration (OSHA) to laboratories which have been recognized to perform certification to U.S. Standards. DQD 507 Rev. 2004-06-30 Certificate: 1702103 Master Contract: 219759 Project: 1702103 Date Issued: 2005/08/11 APPLICABLE REQUIREMENTS 74'7" 5%</%"#"%1 = ' 5%</%"# # > DQD 507 Rev. 2004-06-30 " " ' 9 *+ >A9 ' 9 *+ >A9