BVDSS = 650 V RDS(on) typ ȍ HFD5N65S / HFU5N65S ID = 4.0 A 650V N-Channel MOSFET D-PAK I-PAK 2 FEATURES 1 1 2 3 Originative New Design 3 HFD5N65S Superior Avalanche Rugged Technology Robust Gate Oxide Technology HFU5N65S 1.Gate 2. Drain 3. Source Very Low Intrinsic Capacitances Excellent Switching Characteristics Unrivalled Gate Charge : 10.5 nC (Typ.) Extended Safe Operating Area Lower RDS(ON) ȍ7\S#9GS=10V 100% Avalanche Tested Absolute Maximum Ratings Symbol TC=25 unless otherwise specified Parameter Value Units 650 9 VDSS Drain-Source Voltage ID Drain Current – Continuous (TC = 25ഒ) 4.0 $ Drain Current – Continuous (TC = 100ഒ͚͑ 2.3 $ IDM Drain Current – Pulsed 16.0 $ VGS Gate-Source Voltage ρ30 9 EAS Single Pulsed Avalanche Energy (Note 2) 180 P- IAR Avalanche Current (Note 1) 4.0 $ EAR Repetitive Avalanche Energy (Note 1) 9.1 P- dv/dt Peak Diode Recovery dv/dt (Note 3) 4.5 9QV PD Power Dissipation (TA = 25ఁ) * 2.5 : Power Dissipation (TC = 25ଇ) - Derate above 25ଇ 91 : 0.73 :ഒ -55 to +150 ഒ 300 ഒ (Note 1) TJ, TSTG Operating and Storage Temperature Range TL Maximum lead temperature for soldering purposes, 1/8” from case for 5 seconds Thermal Resistance Characteristics Typ. Max. RșJC Symbol Junction-to-Case Parameter -- 1.37 RșJA Junction-to-Ambient* -- 50 RșJA Junction-to-Ambient -- 110 Units ഒ: * When mounted on the minimum pad size recommended (PCB Mount) క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ HFD5N65S_HFU5N65S June 2015 Symbol Parameter unless otherwise specified Test Conditions Min Typ Max Units On Characteristics VGS RDS(ON) Gate Threshold Voltage VDS = VGS, ID = 250 Ꮃ͑ 2.5 -- 4.5 V Static Drain-Source On-Resistance VGS = 10 V, ID = 2.0 A͑ -- 2.3 2.9 ͑ש VGS = 0 V, ID = 250 Ꮃ͑ 650 -- -- V ID = 250 Ꮃ͑͝ΖΗΖΣΖΟΔΖΕ͑ΥΠͣͦఁ͑ -- 0.6 -- ·͠ఁ͑ VDS = 650 V, VGS = 0 V͑ -- -- 1 Ꮃ͑ VDS = 520 V, TC = 125ఁ͑ -- -- 10 Ꮃ͑ Off Characteristics BVDSS Drain-Source Breakdown Voltage ԩBVDSS Breakdown Voltage Temperature Coefficient /ԩTJ IDSS Zero Gate Voltage Drain Current IGSSF Gate-Body Leakage Current, Forward VGS = 30 V, VDS = 0 V -- -- 100 Ꮂ͑ IGSSR Gate-Body Leakage Current, Reverse VGS = -30 V, VDS = 0 V -- -- -100 Ꮂ͑ -- 520 680 Ꮔ͑ -- 60 80 Ꮔ͑ -- 8.0 10.5 Ꮔ͑ -- 11 33 Ꭸ͑ -- 45 90 Ꭸ͑ -- 40 88 Ꭸ͑ -- 48 100 Ꭸ͑ -- 10.5 13.5 Οʹ͑ -- 2.5 -- Οʹ͑ -- 4.0 -- Οʹ͑ Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 25 V, VGS = 0 V, f = 1.0 MHz͑ Switching Characteristics td(on) Turn-On Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd VDS = 325 V, ID = 4.2 A, RG = 25 ͑ש ͑ ͙͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑ͿΠΥΖ͚͑ͥͦ͑͝ VDS = 520V, ID = 4.2 A, VGS = 10 V ͙ͿΠΥΖ͚͑ͥͦ͑͝ Gate-Drain Charge Source-Drain Diode Maximum Ratings and Characteristics IS Continuous Source-Drain Diode Forward Current -- -- 4.0 ISM Pulsed Source-Drain Diode Forward Current -- -- 16.0 VSD Source-Drain Diode Forward Voltage IS = 4.0 A, VGS = 0 V -- -- 1.4 V trr Reverse Recovery Time -- 300 -- Ꭸ͑ Qrr Reverse Recovery Charge IS = 4.2 A, VGS = 0 V diF/dt = 100 A/ȝV (Note 4) -- 2.2 -- ȝ& A Notes ; 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L=18.9mH, IAS=4.2A, VDD=50V, RG=25:, Starting TJ =25qC 3. ISD$GLGW$ȝV9DD%9DSS , Starting TJ =25 qC 4. Pulse Test : Pulse Width ȝV'XW\&\FOH 5. Essentially Independent of Operating Temperature క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ HFD5N65S_HFU5N65S Electrical Characteristics TC=25 qC HFD5N65S_HFU5N65S ID, Drain Current [A] ID , Drain Current [A] Typical Characteristics 101 150oC 25oC 0 10 -55oC * Note 1. VDS = 50V 2. 250Ps Pulse Test 10-1 2 4 6 8 10 VGS , Gate-Source Voltage [V] VDS, Drain-Source Voltage [V] Figure 1. On Region Characteristics Figure 2. Transfer Characteristics IDR , Reverse Drain Current [A] RDS(on) , [:] Drain-Source On-Resistance 6 VGS = 10V 5 4 3 VGS = 20V 2 1 101 100 150oC 25oC * Note : 1. VGS = 0V 2. 250Ps Pulse Test * Note : TJ = 25oC 0 0 2 4 6 8 10-1 0.2 10 0.4 0.8 1.0 1.2 1.4 Figure 4. Body Diode Forward Voltage Variation with Source Current and Temperature Figure 3. On Resistance Variation vs Drain Current and Gate Voltage Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 800 Ciss 600 Coss 400 * Note ; 1. VGS = 0 V 2. f = 1 MHz Crss 200 VGS, Gate-Source Voltage [V] 12 1000 Capacitances [pF] 0.6 VSD , Source-Drain Voltage [V] ID , Drain Current [A] VDS = 130V 10 VDS = 325V VDS = 520V 8 6 4 2 * Note : ID = 4.2A 0 10-1 0 100 101 VDS, Drain-Source Voltage [V] Figure 5. Capacitance Characteristics 0 2 4 6 8 10 12 QG, Total Gate Charge [nC] Figure 6. Gate Charge Characteristics క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ (continued) 1.2 2.5 RDS(ON), (Normalized) Drain-Source On-Resistance BVDSS, (Normalized) Drain-Source Breakdown Voltage HFD5N65S_HFU5N65S Typical Characteristics 1.1 1.0 * Note : 1. VGS = 0 V 2. ID = 250 PA 0.9 0.8 -100 -50 0 50 100 150 2.0 1.5 1.0 0.5 * Note : 1. VGS = 10 V 2. ID = 2.0 A 0.0 -100 200 -50 0 o 50 100 150 200 TJ, Junction Temperature [oC] TJ, Junction Temperature [ C] Figure 8. On-Resistance Variation vs Temperature Figure 7. Breakdown Voltage Variation vs Temperature 4 Operation in This Area is Limited by R DS(on) 10 Ps ID, Drain Current [A] 100 Ps 1 ms 10 ms 100 ms 0 10 DC * Notes : 1. TC = 25 oC 3 2 1 o 2. TJ = 150 C 3. Single Pulse 10-1 100 101 102 0 25 103 50 75 100 125 150 TC, Case Temperature [oC] VDS, Drain-Source Voltage [V] Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current vs Case Temperature 100 D=0.5 ZTJC(t), Thermal Response ID, Drain Current [A] 101 * Notes : 1. ZTJC(t) = 1.37 oC/W Max. 2. Duty Factor, D=t1/t2 3. TJM - TC = PDM * ZTJC(t) 0.2 0.1 10-1 0.05 0.02 0.01 PDM single pulse t1 -2 10 10-5 10-4 10-3 10-2 10-1 t2 100 101 t1, Square Wave Pulse Duration [sec] Figure 11. Transient Thermal Response Curve క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ HFD5N65S_HFU5N65S Fig 12. Gate Charge Test Circuit & Waveform .ȍ 12V VGS Same Type as DUT Qg 200nF 10V 300nF VDS VGS Qgs Qgd DUT 3mA Charge Fig 13. Resistive Switching Test Circuit & Waveforms RL VDS VDS 90% VDD RG ( 0.5 rated VDS ) Vin DUT 10V 10% tr td(on) td(off) t on tf t off Fig 14. Unclamped Inductive Switching Test Circuit & Waveforms BVDSS 1 EAS = ---- LL IAS2 -------------------2 BVDSS -- VDD L VDS VDD ID BVDSS IAS RG 10V ID (t) DUT VDS (t) VDD tp Time క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ HFD5N65S_HFU5N65S Fig 15. Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + VDS _ IS L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD • dv/dt controlled by RG • IS controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current IS ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt Vf VDD Body Diode Forward Voltage Drop క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ HFD5N65S_HFU5N65S Package Dimension {vTY\YG 2.3±0.1 6.6±0.2 1.2±0.3 9.7+0.5 -0.3 2.7±0.3 0.5±0.05 5.6±0.2 1±0.2 5.35±0.15 1.2±0.3 0.05+0.1 -0.05 0.8±0.2 0.6±0.2 0.5+0.1 -0.05 2.3typ 2.3typ క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ HFD5N65S_HFU5N65S Package Dimension {vTY\YhG క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ HFD5N65S_HFU5N65S Package Dimension {vTY\XG క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡ HFD5N65S_HFU5N65S Package Dimension {vTY\XhG క͑΄Ͷ;ͺΈ͑Ͷ·͟Ͳ͢͝ͻΦΟΖ͑ͣͦ͑͢͡