SHD626051 SHD626051P SHD626051N SHD626051D SENSITRON __ SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4074, REV. H HERMETIC SILICON CARBIDE RECTIFIER DESCRIPTION: A 600-VOLT, 20 AMP POWER SILICON CARBIDE RECTIFIER IN A HERMETIC TO-257 PACKAGE AVAILABLE SCREENED TO ANY REQUIRED LEVEL FEATURES: NO RECOVERY TIME OR REVERSE RECOVERY LOSSES NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR High Frequency Option - Non-magnetic Glidcop leads are available for improved performance at high frequency; use part number prefix SHDG Ceramic Seal Option – For ceramic seals use part number prefix SHDC Rohs Compliant Option – For Rohs compliance, use suffix -G ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. MAXIMUM RATINGS RATING SYMBOL MAX. UNITS PIV 600 Volts O IO 20 Amps O IO 10 Amps IFRM 50 Amps Pd 40 W RJC 2.5 C/W Top, Tstg -55 to 200 C PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With TC = 65 C for P and N suffixes) MAXIMUM DC OUTPUT CURRENT (With TC = 65 C for Single and D suffixes) MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG O (t = 8.3ms, Sine) per leg, TC = 25 C O MAXIMUM POWER DISSIPATION, TC = 25 C, MAXIMUM THERMAL RESISTANCE, Junction to Case PER LEG MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE* * Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C. ELECTRICAL CHARACTERISTICS CHARACTERISTIC TYP MAX. UNITS MAXIMUM FORWARD VOLTAGE DROP TJ = 25C 1.65 1.80 Pulsed (If = 10 A PER LEG) Vf TJ = 150 C 2.05 2.20 MAXIMUM FORWARD VOLTAGE DROP TJ = 25C 1.35 1.45 Pulsed (If = 6 A PER LEG) Vf TJ = 150 C 1.60 1.70 0.04 0.15 TJ = 150 C 0.08 0.50 mA CT 250 350 pF 35 N/A nC MAXIMUM REVERSE CURRENT (Ir @ 600V PIV PER LEG) TJ = 25 C JUNCTION CAPACITANCE CT) (Vr =5V) per leg TOTAL CAPACITIVE CHARGE QC per leg (VR=600V IF=20A di/dt=500A/s TJ=25C) This is design information only © 2014 Sensitron Semiconductor · 221 West Industry Court · Deer Park, NY 11729-4681 Phone (631) 586 7600 · Fax (631) 242 9798 · www.sensitron.com · [email protected] Volts Volts SENSITRON SEMICONDUCTOR SHD626051 SHD626051P SHD626051N SHD626051D TECHNICAL DATA DATA SHEET 4074, REV. H © 2014 Sensitron Semiconductor · 221 West Industry Court · Deer Park, NY 11729-4681 Phone (631) 586 7600 · Fax (631) 242 9798 · www.sensitron.com · [email protected] SHD626051 SHD626051P SHD626051N SHD626051D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4074, REV. H MECHANICAL DIMENSIONS TO-257 .150 (3.81 .140 3.56) 1.132 (28.75 1.032 26.21) Dia. .537 (13.64 .527 13.39) 1 .035 2 .420 (10.67 .410 10.41) .665 (16.89 .645 16.38) .430 (10.92 .410 10.41) .200 (5.08 .190 4.82) .045 (1.14 .035 0.89) 3 (0.89 .025 0.63) 3 Places .100(2.54) BSC 2 Places .120(3.05) BSC PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER/COMMON CATHODE (P) DUAL RECTIFIER/COMMON ANODE (N) DUAL RECTIFIER/DOUBLER (D) PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/ CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE SCHEMATIC 1 2 SINGLE 3 1 2 3 COMMON CATHODE 1 2 3 COMMON ANODE 3 2 DOUBLER 1 Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche capabilities of the device are limited. Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially damaging conditions in their applications. © 2014 Sensitron Semiconductor · 221 West Industry Court · Deer Park, NY 11729-4681 Phone (631) 586 7600 · Fax (631) 242 9798 · www.sensitron.com · [email protected] SENSITRON SEMICONDUCTOR SHD626051 SHD626051P SHD626051N SHD626051D TECHNICAL DATA DATA SHEET 4074, REV. H DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. © 2014 Sensitron Semiconductor · 221 West Industry Court · Deer Park, NY 11729-4681 Phone (631) 586 7600 · Fax (631) 242 9798 · www.sensitron.com · [email protected]