SENSITRON SHD122634P

SHD122634
SHD122634P
SHD122634N
SHD122634D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4665, REV. A
HIGH CURRENT HERMETIC SCHOTTKY
POWER MODULE
DESCRIPTION: A 100 VOLT, 150/120 AMP, POWER SCHOTTKY RECTIFIER IN A POTTED PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
100
Volts
MAXIMUM DC OUTPUT CURRENT @ TC=100 OC (P and N versions)
(per device)
IO
150
Amps
MAXIMUM DC OUTPUT CURRENT @ TC=100 OC (Single and D versions)
(per device)
IO
120
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(per leg)
(t = 8.3ms, Sine)
IFSM
1000
Amps
MAXIMUM JUNCTION CAPACITANCE
(per leg)
CT
3000
pF
RθJC
0.2
°C/W
Top/Tstg
-55 to
+ 200
°C
Vf
0.99
Volts
PEAK INVERSE VOLTAGE
(Vr =5.0V)
MAXIMUM THERMAL RESISTANCE
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed
(If = 120 Amps) (per leg)
TJ = 25 °C
TJ = 125 °C
0.84
MAXIMUM REVERSE CURRENT (Ir @ 100 V PIV) (per leg)
TJ = 25 °C
TJ = 125 °C
Ir
0.6
mA
6
• 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •
SHD122634P
SHD122634N
SHD122634D
SENSITRON
TECHNICAL DATA
DATA SHEET 4665, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
0.370 (9.40
0.330 8.38)
1.27 (32.26
1.23 31.24)
0.64 (16.26
0.60 15.24)
0.720 (18.29
0.680 17.27)
1
2
3
0.50(12.70) Min
0.167 (4.24
Dia
0.147 3.73)
0.070 (1.78
0.050 1.27)
3 Places
0.40(10.16) Typ
0.260(6.61) Max
0.180 (4.57
0.140 3.55)
Heat Sink
Epoxy Shell
PKG. 22
PINOUT TABLE
DEVICE TYPE
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON ANODE (N)
DUAL RECTIFIER/DOUBLER (D)
Curves below are for die only
PIN 1
ANODE 1
CATHODE 1
ANODE
Typical Forward Characteristics
PIN 2
COMMON CATHODE
COMMON ANODE
ANODE/CATHODE
PIN 3
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
102
Instantaneous Reverse Current - IR (mA)
102
Instantaneous Forward Current - IF (A)
200 °C
175 °C
1
10
100
200 °C
101
175 °C
150 °C
0
10
125 °C
10-1
100 °C
75 °C
10-2
50 °C
10-3
25 °C
10-4
125 °C
0
20
40
60
80
Reverse Voltage - VR (V)
100
120
Typical Junction Capacitance
10-1
-2
10
0.1
0.2
0.3
0.4
0.5
0.6
Forward Voltage Drop - VF (V)
0.7
0.8
Junction Capacitance - CT (pF)
25 °C
2500
2000
1500
1000
500
0
20
40
60
80
100
Reverse Voltage - V R (V)
120
• 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •
SHD122634P
SHD122634N
SHD122634D
SENSITRON
TECHNICAL DATA
DATA SHEET 4665, REV. A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected]