SENSITRON SHD126222D

SHD126222
SHD126222P
SHD126222N
SHD126222D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 872, REV. B
Formerly SHD1262 / P / N / D
HERMETIC POWER SCHOTTKY RECTIFIER
Applications:
• Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode
Features:
• Low Reverse Leakage Current
• Soft Reverse Recovery at Low and High Temperature
• Low Forward Voltage Drop
• Low Power Loss, High Efficiency
• High Surge Capacity
• Guard Ring for Enhanced Durability and Long Term Reliability
• Guaranteed Reverse Avalanche Characteristics
ALL RATINGS ARE AT TA = 25 °C UNLESS OTHERWISE SPECIFIED.
MAXIMUM RATINGS
RATING
SYMBOL
MAX.
UNITS
PIV
45
Volts
MAXIMUM DC OUTPUT CURRENT (TC = 100 °C) (Single / Doubler)
IO
15
Amps
MAXIMUM DC OUTPUT CURRENT (TC = 100 °C)
(Common Cathode / Common Anode)
IO
16
Amps
PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. (PER LEG)
IFSM
75
Amps
MAXIMUM THERMAL RESISTANCE (Single / Doubler)
(Common Cathode / Common Anode)
RθJC
1.45
0.72
°C/W
Top, Tstg
-65 to +175
°C
PEAK INVERSE VOLTAGE (PER LEG)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS
SYMBOL
MAX.
UNITS
Vf
0.78
Volts
MAXIMUM FORWARD VOLTAGE DROP Common Cathode Per Leg
IF = 15A, TA = 25 0C
0
0.71
IF = 15A,TA = 125 C
MAXIMUM FORWARD VOLTAGE DROP Common Anode / Doubler Per Leg
IF = 15A, TA = 25 0C
Vf
0
Ir
TA = 125 0C
JUNCTION CAPACITANCE VR = 10Vdc, f = 1mHz
Volts
0.76
IF = 15A,TA = 125 C
MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) TA = 25 0C
0.81
CJ
0.4
mA
15
mA
800
pF
VSIG = 50mV (p-p) (Max) (PER LEG)
(Curves are for bare die only. SD125SB45A)
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - www.sensitron.com • E-mail Address - [email protected] •
SHD126222
SHD126222P
SHD126222N
SHD126222D
SENSITRON
TECHNICAL DATA
DATA SHEET 872, REV. B
Mechanical Dimensions: In Inches / mm
.150 (3.81
Dia.
.140 3.56)
.665 (16.89
.645 16.38)
1.132 (28.75
1.032 26.21)
1
2
.045 (1.14
.035 0.89)
1
2
3
1
COMMON ANODE
2
3
DOUBLER
.430 (10.92
.410 10.41)
3
1
.035 (0.89
.025 0.63)
3 Places
COMMON CATHODE
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
.537 (13.64
.527 13.39)
SINGLE
.100(2.54) BSC
2 Places
2
3
3
2
1
.120(3.05) BSC
TO-257
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DUAL RECTIFIER, DOUBLER (D)
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
Typical Forward Characteristics
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
102
Instantaneous Reverse Current - I R (mA)
175 °C
101
125 °C
150 °C
10
125 °C
100
100 °C
10-1
75 °C
50 °C
10-2
25 °C
10-3
0
100
0.2
0.3
0.4
0.5
0.6
0.7
Forward Voltage Drop - VF (V)
10
20
30
Reverse Voltage - VR (V)
40
50
Typical Junction Capacitance
25 °C
0.8
Junction Capacitance - CT (pF)
Instantaneous Forward Current - I F (A)
175 °C
1
800
700
600
500
400
300
200
0
10
20
30
Reverse Voltage - VR (V)
40
50
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
TECHNICAL DATA
DATA SHEET 872, REV. B
SHD126222
SHD126222P
SHD126222N
SHD126222D
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - www.sensitron.com • E-mail Address - [email protected]