LSP11B-320 LSP46U-320 LSP43B-150 SENSITRON __ SEMICONDUCTOR TECHNICAL DATA PART NUMBER: LSP11B-320, LSP46U-320, LSP43B-150 Datasheet 4122, Rev. C TVS Hybrids for Lightning Strike Protection in Aircraft Application: Lightning Strike Protection 4 Types of devices for different levels of protection The device ratings may be easily customized Hybrid construction to save on board space Low capacitance types to be used on data-line protection Low Cost standard pitch package Protection Level: ABD 0007 Compliant Type Protection Working Volt Leakage Current Capacitance Short Wave Long Wave Clamp Volt VCL VWM IL @ VWM Current Current @ both Waves 1 Bi-Directional 11V 2 Uni-Directional 46V 4 Bi-Directional 43V Short Wave: Long Wave: 10 uA 10 uA 10 uA < 1900 pF N/A < 500 pF 320A 320A 150A 150A 320A N/A 40V 85V 65V Refers to 0.1-usec Rise time and 6.4-usec decay to 50% of the peak current Refers to 6.4-usec Rise time and 70 usec decay to 50% of the peak current o o Operating Temperature: -40 C to 85 C o o Storage Temperature: -55 C to 125 C ©2013 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] LSP11B-320 LSP46U-320 LSP43B-150 SENSITRON __ SEMICONDUCTOR TECHNICAL DATA PART NUMBER: LSP11B-320, LSP46U-320, LSP43B-150 Datasheet 4122, Rev. C Mechanical Drawing Drawing Notes 1. Tolerance = ± .005 2. All dimensions in inches 3. Third angle projection used Pin-out Table Pins 1,3,5,7: Hot-point signal Pins 2,4,6,8: Ground Return DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2013 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]