SENSITRON SEMICONDUCTOR SCP-5115 TECHNICAL DATA PART NUMBER: SCP-5115, REV. – (PRELIMINARY) Hermetic Half Bridge – IGBT Module 600V, 1200A Features: Hermetic core construction Increased creepage & clearance distances for high altitude operation Built-in RTD for accurate temperature sense High frequency switching Operation at temperature extremes Internal layout with minimized stray inductances All ratings are at TA = 25oC unless otherwise specified. Maximum Ratings Symbol Vces Ic VGE Hipot Tjmax Diode IF IFRM Test Conditions Vge = 0V Tc = 25C / 70C, Tj = 175C Value 600 1500 / 1200 + / - 20 Units 175 C 1200 2400 A A V A V 1500Vrms, 50Hz / 60Hz, 1 min. Tc = 25C tp = 1ms Electrical Characteristics All ratings are at TA = 25oC unless otherwise specified. Symbol Test Conditions Min. Typ. Max. Units VCE(sat) Vge = 15V, pulsed ton = 100us, f = 10Hz Ic = 1200A Tc = 70C 1.9 2.3 V VGE(th) Ic = 20mA, Vge = Vce 4.9 6.5 V ICES Vce = 600V, Vge = 0V 20 mA IGES Vce = 0V, Vge = 20V Vce = 0V 1600 nA Ets Total Switching Energy Vge = 76 mJ 15V Vcc = 300V, Ic = 1200A, Rg = 0.5 ohm Ciss Vce = 25V, Vge = 0V, f = 1MHz 104 nF Crss 3.0 nF td(on) Vc = 300V 110 ns Ic = 1200A tr 50 ns Vge = + / - 15V td(off) 490 ns Rg = 0.5 Ohm tf 50 ns Diode VF IF = 1200A 2.1 V Erec IF = 1200A; VR =300V, 15 mJ di/dt=20,000A/usec ©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 www.sensitron.com [email protected] SCP-5115 SENSITRON TECHNICAL DATA PART NUMBER: SCP-5115, REV. - (PRELIMINARY) MECHANICAL DIMENSIONS: in inches / mm 3.60±.01 -C- 3.14 (4X) R.15±.01 + + 1.09 4.50±0.01 -B- ~ 4.04 .85 .89 1.50 - 6X .250-28UNC-3B 0.010 A B - S/N XXX C D/C XXXX .160 MIN FULL THREAD - HOLE DEPTH .243 .160 THICK JAM NUT INSTALLED UNDER TAB .250-28 CAP SOCKET INSTALLED (OPTIONAL) .400 **SLOT WIDTH MUST BE GREATER THAN .270" (6X)** MAX (6X) Ø.203+.005 -.003 0.005 WHITE BLACK STRIPE STRESS RELIEF HEAT SHRINK TUBINGAPPLIED OVER WIRES .4" MAX FROM CASE YELLOW BLACK STRIPE RED BLACK STRIPE BLACK A B C RED YELLOW WHITE BLUE ©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 www.sensitron.com [email protected] SCP-5115 SENSITRON TECHNICAL DATA PART NUMBER: SCP-5115, REV. - (PRELIMINARY) SCHEMATIC (+) RTD1 (+) C1 G1 E1 (~) C2 G2 E2 RTD2 (-) (-) DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 www.sensitron.com [email protected]