PS229 Version Issue Date File Name Total Pages : A.004 : 2010/07/16 : SP-PS229-A.004.doc : 11 4-Channel Secondary Monitoring IC 新竹市科學園區展業一路 9 號 7 樓之 1 SILICON TOUCH TECHNOLOGY INC. 9-7F-1, Prosperity Road I, Science Based Industrial Park, Hsin-Chu, Taiwan 300, R.O.C. Tel:886-3-5645656 Fax:886-3-5645626 PS229 PS229 4-Channel Secondary Monitoring IC General Description PS229 is specially designed for switching power supply system. Four important functions of PS229 are the followings: over-voltage protection, over-current protection, under-voltage protection and power good signal generating. OVP/UVP (Over-Voltage/Under-Voltage Protection) monitors 3.3V, 5V and dual 12V to protect our power supply and PC, FPO/ goes to high when one of these supply voltages exceeds their normal operation voltage range. OCP (Over Current Protection) monitors IS33, IS5, IS12 input current sense. An adjustable over-current condition composed of Iref and “protection current range resistor” helps users design OCP easily. Power good signal generating notifies personal computer when power supply is ready or power supply is going to shutdown, therefore it can provide a reliable power supply environment. Features • • • • • • • • • Over/Under-voltage protection and lock out Over-current protection and lock out Fault protection output with open drain output stage Open drain power good output signal for power good input Built-in 300mS power good delay AC on 75ms delay for UV/OC protection 38mS PSON/ control de-bounce Wide power supply range (3.8V~16V) Special care for AC power off 4-Channel Secondary Monitoring IC Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 1 PS229 Block Diagram VS12A 155KΩ FPO/ delay 12 UV S Q 9KΩ Vref 73uS R 1MΩ 12 OV 16KΩ Vref delay 38mS De-bounce H : 4mS L : 4.5uS VS12B 155KΩ 12 UV 9KΩ Vref 16KΩ Vref VCC 30KΩ 12 OV VCCI 2KΩ PSON/ 1.25V 4.5V 90KΩ VS5 58KΩ 5 UV 13.5KΩ Vref delay 1 0 5 OV H : 75mS L : 4.5uS 18.5KΩ Vref 1.13V PGI 0.63V R Q S VS33 38.5KΩ 1.25V 3.3 UV 23.5KΩ Vref VCCI 3.3 OV 28KΩ Vref 1MΩ PGO delay VCCI IS12 Step Down to near 2.5V 73uS De-bounce 12 OC H : 300mS L : 4.5uS Iref X 8 VCCI Step Down to near 2.5V 12 OC delay Power On Reset IS5 Step Down to near 2.5V POR Constant Current Source Iref 5 OC Internal Power Iref X 8 VCCI = 4V VCC VCCI IS33 Step Down to near 2.5V RI H : 20mS L : 4.5uS VCCI 3.3 OC Band-Gap Reference Vref 1.25V Clock Generator CLK VCC GND Iref X 8 4-Channel Secondary Monitoring IC Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 2 PS229 Timing Chart Vcc PSON/ FPO/ PGI VS12A IS12 VS12B VS5 IS5 VS33 IS33 PGO Td1 Tb1 Td3 Td2 AC turn on VPGI UVP/OVP/OCP Pext protect PSON/ turn on PSON/ turn off PSON/ turn on AC turn off 1.25V 1.13V 0.63V Td1 Td2 OVP 4-Channel Secondary Monitoring IC OVP/UVP/OCP/Pext OVP Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 3 PS229 Pin Descriptions Pin No 1 PIN NAME PGI Descriptions Power good input signal pin 2 GND Ground 3 FPO/ Inverted fault protection output ,open drain output stage 4 PSON/ Remote ON/OFF control input pin 5 IS12 12V over current protection input pin 6 RI Current sense setting 7 VS12B 12V(2) over/under voltage protection input pin 8 IS5 5.0V over current protection input pin 9 IS33 3.3V over current protection input pin 10 VS12A 12V(1) over/under voltage protection input pin 11 VS33 3.3V over/under voltage protection input pin 12 VS5 5.0V over/under voltage protection input pin 13 VCC Power supply 14 PGO Power good output signal pin , open drain output stage Absolute Maximum Ratings Parameter Rating Unit Storage Temperature (Tstg) -40 to +125 °C Operating Temperature (Topr) -30 to +90 °C Supply Voltage (VCC) VCC -0.5 to +16.0 V VS12, IS12 -0.5 to +16.0 V VS5, IS5 -0.5 to +9.0 V VS33, IS33 -0.5 to +7.0 V PGI -0.5 to +16.0 V PSON/ -0.5 to Vcc+0.5 V FPO/ -0.5 to +16.0 V PGO -0.5 to Vcc+0.5 V RI 12.5 to 62.5 uA PSON/, PGO > 5000 V FPOB, VS12 > 2000 V PGI, IS12, VS5 > 3000 V Others > 4000 V Input Voltage Range (VI) Output Voltage Range (VO) Output Current for RI (IRI) ESD Susceptibility* (VESD) * Human Body Model (HBM). 4-Channel Secondary Monitoring IC Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 4 PS229 Electrical Characteristics, Vcc=12V, Ta = 25°C. (unless otherwise specified) Power Supply Section Parameter Conditions Supply Voltage MIN 3.8 Supply Current Power On Reset Hysteresis (VHYST) MAX Unit 5.0 16.0 V 4.5 5.0 mA 3.2 3.4 3.6 V -0.15 -0.3 -0.45 V VPSON/ = 5V Power On Reset Threshold Voltage (VPOR) TYP Over-Voltage Section Parameter Conditions MIN TYP MAX Unit VS33 3.7 3.9 4.1 V VS5 5.7 6.1 6.5 V VS12A/B 13.1 13.8 14.5 V Over-Voltage Threshold Under-Voltage Section Parameter Conditions MIN TYP MAX Unit VS33 2.0 2.2 2.4 V VS5 3.3 3.5 3.7 V VS12A/B 8.5 9.0 9.5 V Under-Voltage Threshold Over-Current Section Parameter Conditions Constant Current Generator Voltage (VRI) MIN TYP MAX 1.20 1.25 1.30 MIN TYP MAX Unit V PGI, Analog Input Parameter Conditions Unit Threshold Voltage for start Td1 1.16 1.25 1.33 V Threshold Voltage for start Td2 0.60 0.63 0.75 V Threshold Voltage for mask OC,UV 1.00 1.13 1.16 V +/-50 +/-80 mV +/-20 Hysteresis (VHYST)* * All of the comparator for PGI input in block diagram. 4-Channel Secondary Monitoring IC Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 5 PS229 Electrical Characteristics (Continued) PGO, Open Drain Digital Output Parameter Conditions Leakage Current (ILKG) VPGO=5V Low Level Output Voltage (VOL) ISINK=10mA MIN TYP MAX Unit 5 uA 0.4 V FPO/, Open Drain Digital Output Parameter Conditions Leakage Current (ILKG) VFPO/=5V Low Level Output Voltage (VOL) ISINK=10mA MIN TYP MAX Unit 5 uA 0.3 V PSON/, Analog Input Parameter Conditions MIN TYP MAX Threshold Voltage ( High ) 1.60 Threshold Voltage ( Low ) 0.85 Unit V V Switching Characteristics, Vcc=12V, Ta = 25°C. Parameter Conditions MIN TYP MAX Unit PGI to PGO Delay Time (Td1) 200 300 400 mS Short Circuit Delay Time (Td2) 49 75 100 mS PGO to FPO/ Delay Time (Td3) 2 4 6 mS Under Voltage Delay Time (Td4) 47 73 100 uS Over Current Delay Time (Td5) 13 20 27 mS Over Voltage Delay Time (Td6) 47 73 100 uS PSON/ De-bounce Time (Tb1) 24 38 61 mS PGO Noise De-glitch Time (Tb2) 47 73 100 uS 4-Channel Secondary Monitoring IC Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 6 PS229 Application Typical 4 rails SPS S.P.S. Secondary Side RS5 +5V Output RS33 +3.3V Coil +3.3V Output RS12(1) +12V Coil +12V(1) Output RS12(2) ROC5 or ROC33 ROC12 = +12V(2) Output RPGO 4.7K +5VSB 1 PGI PGO 14 2 GND Vcc 13 3 FPO/ VS5 12 PGO +5VSB 1K 4 PSON/ PSON 5 IS12 VS33 11 VS12A 10 IS33 9 7 VS12B Cby 6 RI IS5 8 RI RPGI CPGI PS229 Notes: 1. Zener diode or resistor or both of them can be used in component X. 2. The bypass capacitor Cby suggests to be 0.1uF~ 10uF and layout nearby pin VCC. 3. The recommend sense values of RS12(1), RS12(2), RS5 and RS33 are ≥ 0.002Ω. 4. Over-Current Protection design example: V 1.25 (1) I ref = 20 μA , RI = RI = = 62.5 K (Ω ) I RI 20μ (2) RS5=0.002 Ω , ΔV5V = 0.002 × I +5V = ROC 5 × 8 × I ref (3) If +5V OCP trip point is 20A, ROC 5 = 4-Channel Secondary Monitoring IC 0.002 × 20 = 250(Ω ) 8 × 20 μ Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 7 PS229 Package Specification ( 14-pin SOP ) E H 0.015 x 45° D A 0.010 A1 b L 0.004 Seating Plane 0 5 0.0 Symbol Dimension in mm 10 0.2 mm 0.4 Dimension in inch Min Normal Max Min Normal Max 1.626 1.727 0.058 0.064 0.068 0.254 0.004 A 1.473 A1 0.102 b 0.330 0.406 0.508 0.013 0.016 0.020 c 0.191 0.203 0.249 0.008 0.008 0.010 D 8.534 8.661 8.738 0.336 0.341 0.344 E 3.810 3.912 3.988 0.150 0.154 0.157 1.270 e θ e inch NOTE 0.010 0.050 H 5.791 5.994 6.198 0.228 0.236 0.244 L 0.381 0.635 1.270 0.015 0.025 0.050 θ° 0 8 0 8 4-Channel Secondary Monitoring IC Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 8 PS229 Package Specification ( 14-pin DIP ) E1 E eB θ° D A2 A Seating Plane A1 b1 b e 0 S 5 10 0.0 Symbol Dimension in mm Min Normal Max Normal 25 mm 1.0 inch NOTE Max 0.210 0.381 A2 3.175 3.302 3.429 0.125 0.13 0.135 b 1.300 1.500 1.700 0.051 0.059 0.067 b1 0.400 0.480 0.560 0.015 0.019 0.022 D 18.669 19.495 20.320 0.735 0.768 0.800 E 7.366 7.620 7.874 0.290 0.300 0.310 E1 6.223 6.812 7.400 0.245 0.268 0.291 e 2.290 2.540 2.790 0.090 0.100 0.110 eB 8.509 9.017 9.525 0.335 0.355 0.375 0.015 L 2.540 3.175 3.810 0.100 0.125 0.150 0 7 S 2.390 0 20 Dimension in inch Min A1 θ° 15 0.5 5.334 A L 7 15 0.094 15 4-Channel Secondary Monitoring IC Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 9 PS229 The products listed herein are designed for ordinary electronic applications, such as electrical appliances, audio-visual equipment, communications devices and so on. Hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. Misusing those products may directly or indirectly endanger human life, or cause injury and property loss. Silicon Touch Technology, Inc. will not take any responsibilities regarding the misusage of the products mentioned above. Anyone who purchases any products described herein with the above-mentioned intention or with such misused applications should accept full responsibility and indemnify. Silicon Touch Technology, Inc. and its distributors and all their officers and employees shall defend jointly and severally against any and all claims and litigation and all damages, cost and expenses associated with such intention and manipulation. Silicon Touch Technology, Inc. reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. 4-Channel Secondary Monitoring IC Version:A.004 未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任 Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement. PAGE 10