PS232F Version Issue Date File Name Total Pages : A.001 : 2008/08/21 : SP-PS232F-A.001.doc : 11 6-Channel Secondary Monitoring IC 新竹市科學園區展業一路 9 號 7 樓之 1 SILICON TOUCH TECHNOLOGY INC. 9-7F-1, Prosperity Road I, Science Based Industrial Park, Hsin-Chu, Taiwan 300, R.O.C. Fax：886-3-5645626 Tel：886-3-5645656 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F PS232F 6-Channel Secondary Monitoring IC General Description PS232F is specially designed for switching power supply system. Four important functions of PS232F are the followings: over-voltage protection, over-current protection, under-voltage protection and power good signal generating. OVP/UVP (Over-Voltage/Under-Voltage Protection) monitors 3.3V, 5V and quartic 12V to protect our power supply and PC, FPO/ goes to high when one of these supply voltages exceeds their normal operation voltage range. OCP (Over Current Protection) monitors IS33, IS5, IS12A, IS12B, IS12C, IS12D input current sense. An adjustable over-current condition composed of Iref and “protection current range resistor” helps users design OCP easily. An additional protection input pin provides the flexibility for design protection circuit. Power good signal generating notifies personal computer when power supply is ready or power supply is going to shutdown, therefore it can provide a reliable power supply environment. Features • • • • • • • • • • Over/Under-voltage protection and lock out Over-current protection and lock out Additional protection input Fault protection output with open drain output stage Open drain power good output signal for power good input Built-in 300mS power good delay AC on 75ms delay for UV/OC protection 38mS PSON/ control de-bounce Wide power supply range (3.8V~16V) Special care for AC power off Version：A.001 6-Channel Secondary Monitoring IC -1- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F Block Diagram FPO/ delay VS VS12A S Q 155KΩ 15uS VS12B VS12C R 1MΩ UV Vref 9KΩ delay VS12D 38mS De-bounce OV Vref H : 4mS L : 4.5uS 16KΩ VCC 30KΩ VCCI 2KΩ PSON/ 1.25V 12 OV 4.5V 90KΩ 12 UV Pext VS5 2.5V 58KΩ 5 UV 13.5KΩ Vref delay 1 0 5 OV H : 75mS L : 4.5uS 18.5KΩ Vref 1.13V PGI 0.63V R Q S VS33 38.5KΩ 1.25V 3.3 UV 23.5KΩ Vref VCCI 3.3 OV 28KΩ Vref 1MΩ PGO delay 73uS De-bounce H : 300mS L : 4.5uS VCCI VS IS IS12A IS12B Step Down to near 2.5V OC delay Iref X 8 IS12C 1mS IS12D 12 OC Power On Reset delay VCCI IS5 Step Down to near 2.5V 5 OC H : 20mS L : 4.5uS POR Internal Power Constant Current Source Iref VCCI = 4V VCC Iref X 8 VCCI IS33 Step Down to near 2.5V Band-Gap Reference 3.3 OC RI Vref 1.25V Clock Generator CLK VCC GND Iref X 8 Version：A.001 6-Channel Secondary Monitoring IC -2- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F Timing Chart Vcc PSON/ FPO/ PGI VS12A VS12B VS12C VS12D VS5 VS33 Pext IS12A IS12B IS12C IS12D IS5 IS33 PGO Td1 Tb1 Td3 Td2 AC turn on VPGI UVP/OVP/OCP Pext protect PSON/ turn on PSON/ turn off PSON/ turn on AC turn off 1.25V 1.13V 0.63V Td1 Td2 OVP OVP/UVP/OCP OVP Version：A.001 6-Channel Secondary Monitoring IC -3- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F Pin Descriptions Pin No 1 PIN NAME PGI Descriptions Power good input signal pin 2 GND Ground 3 FPO/ Inverted fault protection output ,open drain output stage 4 PSON/ Remote ON/OFF control input pin 5 IS12A 12V(1) over current protection input pin 6 RI Current sense setting 7 IS12B 12V(2) over current protection input pin 8 VS12B 12V(2) over/under voltage protection input pin 9 VS12C 12V(3) over/under voltage protection input pin 10 VS12D 12V(4) over/under voltage protection input pin 11 IS12D 12V(4) over current protection input pin 12 IS12C 12V(3) over current protection input pin 13 Pext External protection detect input pin 14 IS5 5.0V over current protection input pin 15 IS33 3.3V over current protection input pin 16 VS12A 12V(1) over/under voltage protection input pin 17 VS33 3.3V over/under voltage protection input pin 18 VS5 5.0V over/under voltage protection input pin 19 VCC Power supply 20 PGO Power good output signal pin , open drain output stage Absolute Maximum Ratings Parameter Rating Unit Storage Temperature (Tstg) -40 to +125 °C Operating Temperature (Topr) -30 to +90 °C Supply Voltage (VCC) VCC -0.5 to +16.0 V VS12,IS12(A,B,C,D) -0.5 to +16.0 V VS5, IS5 -0.5 to +9.0 V VS33, IS33 -0.5 to +7.0 V PGI -0.5 to +16.0 V PSON/, Pext -0.5 to Vcc+0.5 V FPO/ -0.5 to +16.0 V PGO -0.5 to Vcc+0.5 V RI 12.5 to 62.5 uA Input Voltage Range (VI) Output Voltage Range (VO) Output Current for RI (IRI) Version：A.001 6-Channel Secondary Monitoring IC -4- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F Electrical Characteristics, Vcc=12V, Ta = 25°C. (unless otherwise specified) Power Supply Section Parameter Conditions Supply Voltage MIN 3.8 Supply Current Power On Reset Hysteresis (VHYST) MAX Unit 5.0 16.0 V 4.5 5.0 mA 3.2 3.4 3.6 V -0.15 -0.3 -0.45 V VPSON/ = 5V Power On Reset Threshold Voltage (VPOR) TYP Over-Voltage Section Parameter Conditions MIN TYP MAX Unit VS33 3.7 3.9 4.1 V VS5 5.7 6.1 6.5 V VS12A/B/C/D 13.1 13.8 14.5 V Over-Voltage Threshold Under-Voltage Section Parameter Conditions MIN TYP MAX Unit VS33 2.0 2.2 2.4 V VS5 3.3 3.5 3.7 V VS12A/B/C/D 8.5 9.0 9.5 V Under-Voltage Threshold PGI, Analog Input Parameter Conditions MIN TYP MAX Unit Threshold Voltage for start Td1 1.16 1.25 1.33 V Threshold Voltage for start Td2 0.60 0.63 0.75 V Threshold Voltage for mask OC,UV 1.05 1.13 1.21 V +/-50 +/-80 mV +/-20 Hysteresis (VHYST)* * All of the comparator for PGI input in block diagram. Version：A.001 6-Channel Secondary Monitoring IC -5- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F Electrical Characteristics (Continued) PGO, Open Drain Digital Output Parameter Conditions Leakage Current (ILKG) VPGO=5V Low Level Output Voltage (VOL) ISINK=10mA MIN TYP MAX Unit 5 uA 0.3 V FPO/, Open Drain Digital Output Parameter Conditions Leakage Current (ILKG) VFPO/=5V Low Level Output Voltage (VOL) ISINK=20mA MIN TYP MAX Unit 5 uA 0.4 V PSON/, Analog Input Parameter Conditions Threshold Voltage ( High ) MIN TYP MAX 1.60 Unit V Threshold Voltage ( Low ) 0.75 V External Protection Detect Section Parameter Conditions Threshold(VTH) MIN TYP MAX Unit 2.5 2.6 2.7 V +/-50 +/-80 mV +/-20 Hysteresis (VHYST) Switching Characteristics, Vcc=12V, Ta = 25°C. Parameter Conditions MIN TYP MAX Unit PGI to PGO Delay Time (Td1) 200 300 480 mS Short Circuit Delay Time (Td2) 49 75 114 mS PGO to FPO/ Delay Time (Td3) 2 4 6 mS Under Voltage Delay Time (Td4) 0.6 1 1.4 mS Over Current Delay Time (Td5) 13 20 27 mS Over Voltage Delay Time (Td6) 5 15 25 uS Pext Delay Time (Td7) 24 38 52 mS PSON/ De-bounce Time (Tb1) 24 38 52 mS PGO Noise De-glitch Time (Tb2) 47 73 110 uS Version：A.001 6-Channel Secondary Monitoring IC -6- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F Application Typical 6 rails SPS S.P.S. Secondary Side RS5 +3.3V Coil +12V(1) Output RS12(2) +12V(2) Coil +12V(2) Output RS12(3) +12V(3) Coil +12V(3) Output RS12(4) +12V(4) Coil +12V(4) Output ROC12(4) ROC12(3) ROC5 ROC33 ROC12(1) ROC12(2) or +3.3V Output RS12(1) +12V(1) Coil = +5V Output RS33 RPGO 4.7K +5VSB 1 PGI PGO 20 2 GND Vcc 19 3 FPO/ VS5 18 PGO +5VSB 1K 4 PSON/ PSON VS33 17 0.1u 5 IS12A 6 RI VS12A 16 IS33 15 0.1u 7 IS12B IS5 14 8 VS12B Pext 13 9 VS12C IS12C 12 10 VS12D IS12D 11 0.1u 0.1u RI CPGI 0.1u PS232F Pext 0.1u Notes: 1. Zener diode or resistor or both of them can be used in component X. 2. The bypass capacitor Cby suggests to be 0.1uF~ 10uF and layout nearby pin VCC. 3. The recommend sense values of RS12(1), RS12(2), RS5 and RS33 are ≥ 0.002Ω. 4. Over-Current Protection design example: V 1.25 (1) I ref = 20 μA , RI = RI = = 62.5 K (Ω ) I RI 20μ (2) RS5=0.002 Ω , ΔV5V = 0.002 × I +5V = ROC 5 × 8 × I ref (3) If +5V OCP trip point is 20A, ROC 5 = 0.002 × 20 = 250(Ω ) 8 × 20 μ Version：A.001 6-Channel Secondary Monitoring IC -7- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F Package Specification ( 20-pin DIP ) E1 E eB θ° D A2 A Seating Plane A1 b1 e b 0 5 S 10 0.0 Symbol Dimension in mm Min Normal A 0.381 A2 3.175 3.302 0.400 3.429 0.125 0.13 0.560 Max 0.022 0.300 E1 6.223 7.000 0.245 e 2.286 2.794 0.090 EB 8.509 9.525 0.335 L 2.540 3.556 0.100 9.017 0.135 1.040 7.620 1.905 0 1.0 inch 0.064 0.016 26.416 S mm 0.210 1.626 D θ° Normal 25 NOTE Dimension in inch Min 20 0.015 b E 15 0.5 5.334 A1 b1 Max L 15 0.276 0.110 0.355 0.375 0.132 0.075 0 15 Version：A.001 6-Channel Secondary Monitoring IC -8- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F Package Specification ( 20-pin SOP ) E H 0.020(inch) x45˚ D A A1 θ e b L 0.004 Dimension in mm Symbol MIN. MAX. Dimension in inch MIN. A 2.362 2.642 0.093 0.104 A1 0.102 0.305 0.004 0.012 b 0.406BSC e 1.270BSC NOTE MAX. 0.016BSC 0.050BSC D 12.598 12.903 0.496 0.508 H 10.008 10.643 0.394 0.419 E 7.391 7.595 0.291 0.299 L 0.406 1.270 0.016 0.050 θ 0˚ 8˚ 0˚ 8˚ Version：A.001 6-Channel Secondary Monitoring IC -9- 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. PS232F The products listed herein are designed for ordinary electronic applications, such as electrical appliances, audio-visual equipment, communications devices and so on. Hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. Misusing those products may directly or indirectly endanger human life, or cause injury and property loss. Silicon Touch Technology, Inc. will not take any responsibilities regarding the misusage of the products mentioned above. Anyone who purchases any products described herein with the above-mentioned intention or with such misused applications should accept full responsibility and indemnify. Silicon Touch Technology, Inc. and its distributors and all their officers and employees shall defend jointly and severally against any and all claims and litigation and all damages, cost and expenses associated with such intention and manipulation. Silicon Touch Technology, Inc. reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. Version：A.001 6-Channel Secondary Monitoring IC -10-